Torsional resistance of crowns cemented to composite cores involving three stainless steel endodontic post designs

Brett I. Cohen, Bapanaiah Penugonda, Mark K. Pagnillo, Allan Schulman, Eugene Hittelman

Research output: Contribution to journalArticle

Abstract

Statement of problem. There are no studies analyzing the effects of a crown in relationship to torsional resistance for a titanium-reinforced core material supported by a post. Purpose. This study investigated the effects of post design on the torsional resistance of a crown supported by a titanium-reinforced composite core material (Ti-Core) and 3 endodontic posts (Access Post, Flexi-Post, and ParaPost). Material and method. Three groups of 10 specimens per group were studied. A total of 30 recently extracted human single-rooted (incisors) teeth with their crowns removed were used. Post holes preparations were created according to manufacturer's instructions. All posts were cemented using Flexi-Flow with titanium cement. Scotchbond Multi-Purpose bonding system was used as the bonding system for all groups. All cores were fabricated with Ti-Core with titanium core material with hard copper bands as the matrix. The Ti-Core core material was allowed to set for 1 hour. Metal crowns were fabricated and cemented with zinc phosphate cement. Specimens were placed in a special jig and a clockwise torsional force was applied. Torsional force was measured on a Lebow 1102-200 torque transducer and recorded on a Hewlett Packard 7015B X-Y recorder in inch x ounce. A 1-way analysis of variance (ANOVA) was used to test for statistical significance (P<.001). Results. The torsional values (inch x ounce) were AccessPost 77.2 ± 30.3, Flexi-Post 162.2 ± 51.2, and ParaPost 60.9 ± 28.4. SNK and Scheffé comparison tests revealed that the Flexi-Post group had significantly greater resistance to torque loading than the AccessPost and ParaPost groups, which were statistically similar to each other. Conclusion. Post design has an effect on torsional resistance of a crown supported by titanium-reinforced core build-up and post. The threaded split-shank design of the Flexi-Post dowel offers significantly greater resistance to torsional loading than the passive posts studied.

Original languageEnglish (US)
Pages (from-to)38-42
Number of pages5
JournalJournal of Prosthetic Dentistry
Volume84
Issue number1
DOIs
StatePublished - Jul 2000

Fingerprint

Endodontics
Stainless Steel
Titanium
Crowns
Mechanical Torsion
Torque
Matrix Bands
Zinc Phosphate Cement
Incisor
Transducers
Copper
Analysis of Variance
Tooth
Metals
Ti-Core composite resin

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Torsional resistance of crowns cemented to composite cores involving three stainless steel endodontic post designs. / Cohen, Brett I.; Penugonda, Bapanaiah; Pagnillo, Mark K.; Schulman, Allan; Hittelman, Eugene.

In: Journal of Prosthetic Dentistry, Vol. 84, No. 1, 07.2000, p. 38-42.

Research output: Contribution to journalArticle

Cohen, Brett I. ; Penugonda, Bapanaiah ; Pagnillo, Mark K. ; Schulman, Allan ; Hittelman, Eugene. / Torsional resistance of crowns cemented to composite cores involving three stainless steel endodontic post designs. In: Journal of Prosthetic Dentistry. 2000 ; Vol. 84, No. 1. pp. 38-42.
@article{09183a673edb49d0af1de952a20e4067,
title = "Torsional resistance of crowns cemented to composite cores involving three stainless steel endodontic post designs",
abstract = "Statement of problem. There are no studies analyzing the effects of a crown in relationship to torsional resistance for a titanium-reinforced core material supported by a post. Purpose. This study investigated the effects of post design on the torsional resistance of a crown supported by a titanium-reinforced composite core material (Ti-Core) and 3 endodontic posts (Access Post, Flexi-Post, and ParaPost). Material and method. Three groups of 10 specimens per group were studied. A total of 30 recently extracted human single-rooted (incisors) teeth with their crowns removed were used. Post holes preparations were created according to manufacturer's instructions. All posts were cemented using Flexi-Flow with titanium cement. Scotchbond Multi-Purpose bonding system was used as the bonding system for all groups. All cores were fabricated with Ti-Core with titanium core material with hard copper bands as the matrix. The Ti-Core core material was allowed to set for 1 hour. Metal crowns were fabricated and cemented with zinc phosphate cement. Specimens were placed in a special jig and a clockwise torsional force was applied. Torsional force was measured on a Lebow 1102-200 torque transducer and recorded on a Hewlett Packard 7015B X-Y recorder in inch x ounce. A 1-way analysis of variance (ANOVA) was used to test for statistical significance (P<.001). Results. The torsional values (inch x ounce) were AccessPost 77.2 ± 30.3, Flexi-Post 162.2 ± 51.2, and ParaPost 60.9 ± 28.4. SNK and Scheff{\'e} comparison tests revealed that the Flexi-Post group had significantly greater resistance to torque loading than the AccessPost and ParaPost groups, which were statistically similar to each other. Conclusion. Post design has an effect on torsional resistance of a crown supported by titanium-reinforced core build-up and post. The threaded split-shank design of the Flexi-Post dowel offers significantly greater resistance to torsional loading than the passive posts studied.",
author = "Cohen, {Brett I.} and Bapanaiah Penugonda and Pagnillo, {Mark K.} and Allan Schulman and Eugene Hittelman",
year = "2000",
month = "7",
doi = "10.1067/mpr.2000.107915",
language = "English (US)",
volume = "84",
pages = "38--42",
journal = "Journal of Prosthetic Dentistry",
issn = "0022-3913",
publisher = "Mosby Inc.",
number = "1",

}

TY - JOUR

T1 - Torsional resistance of crowns cemented to composite cores involving three stainless steel endodontic post designs

AU - Cohen, Brett I.

AU - Penugonda, Bapanaiah

AU - Pagnillo, Mark K.

AU - Schulman, Allan

AU - Hittelman, Eugene

PY - 2000/7

Y1 - 2000/7

N2 - Statement of problem. There are no studies analyzing the effects of a crown in relationship to torsional resistance for a titanium-reinforced core material supported by a post. Purpose. This study investigated the effects of post design on the torsional resistance of a crown supported by a titanium-reinforced composite core material (Ti-Core) and 3 endodontic posts (Access Post, Flexi-Post, and ParaPost). Material and method. Three groups of 10 specimens per group were studied. A total of 30 recently extracted human single-rooted (incisors) teeth with their crowns removed were used. Post holes preparations were created according to manufacturer's instructions. All posts were cemented using Flexi-Flow with titanium cement. Scotchbond Multi-Purpose bonding system was used as the bonding system for all groups. All cores were fabricated with Ti-Core with titanium core material with hard copper bands as the matrix. The Ti-Core core material was allowed to set for 1 hour. Metal crowns were fabricated and cemented with zinc phosphate cement. Specimens were placed in a special jig and a clockwise torsional force was applied. Torsional force was measured on a Lebow 1102-200 torque transducer and recorded on a Hewlett Packard 7015B X-Y recorder in inch x ounce. A 1-way analysis of variance (ANOVA) was used to test for statistical significance (P<.001). Results. The torsional values (inch x ounce) were AccessPost 77.2 ± 30.3, Flexi-Post 162.2 ± 51.2, and ParaPost 60.9 ± 28.4. SNK and Scheffé comparison tests revealed that the Flexi-Post group had significantly greater resistance to torque loading than the AccessPost and ParaPost groups, which were statistically similar to each other. Conclusion. Post design has an effect on torsional resistance of a crown supported by titanium-reinforced core build-up and post. The threaded split-shank design of the Flexi-Post dowel offers significantly greater resistance to torsional loading than the passive posts studied.

AB - Statement of problem. There are no studies analyzing the effects of a crown in relationship to torsional resistance for a titanium-reinforced core material supported by a post. Purpose. This study investigated the effects of post design on the torsional resistance of a crown supported by a titanium-reinforced composite core material (Ti-Core) and 3 endodontic posts (Access Post, Flexi-Post, and ParaPost). Material and method. Three groups of 10 specimens per group were studied. A total of 30 recently extracted human single-rooted (incisors) teeth with their crowns removed were used. Post holes preparations were created according to manufacturer's instructions. All posts were cemented using Flexi-Flow with titanium cement. Scotchbond Multi-Purpose bonding system was used as the bonding system for all groups. All cores were fabricated with Ti-Core with titanium core material with hard copper bands as the matrix. The Ti-Core core material was allowed to set for 1 hour. Metal crowns were fabricated and cemented with zinc phosphate cement. Specimens were placed in a special jig and a clockwise torsional force was applied. Torsional force was measured on a Lebow 1102-200 torque transducer and recorded on a Hewlett Packard 7015B X-Y recorder in inch x ounce. A 1-way analysis of variance (ANOVA) was used to test for statistical significance (P<.001). Results. The torsional values (inch x ounce) were AccessPost 77.2 ± 30.3, Flexi-Post 162.2 ± 51.2, and ParaPost 60.9 ± 28.4. SNK and Scheffé comparison tests revealed that the Flexi-Post group had significantly greater resistance to torque loading than the AccessPost and ParaPost groups, which were statistically similar to each other. Conclusion. Post design has an effect on torsional resistance of a crown supported by titanium-reinforced core build-up and post. The threaded split-shank design of the Flexi-Post dowel offers significantly greater resistance to torsional loading than the passive posts studied.

UR - http://www.scopus.com/inward/record.url?scp=0034222483&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034222483&partnerID=8YFLogxK

U2 - 10.1067/mpr.2000.107915

DO - 10.1067/mpr.2000.107915

M3 - Article

C2 - 10898840

AN - SCOPUS:0034222483

VL - 84

SP - 38

EP - 42

JO - Journal of Prosthetic Dentistry

JF - Journal of Prosthetic Dentistry

SN - 0022-3913

IS - 1

ER -