Torsional behavior of WaveOne Gold endodontic file with the dedicated motor of the original WaveOne file

Jung Hong Ha, Asgeir Sigurdsson, Gustavo De-Deus, Antheunis Versluis, Sang Won Kwak, Hyeon Cheol Kim

Research output: Contribution to journalArticle

Abstract

This study compares the safety limits and torsional resistances ofWaveOne Gold (WOG) and WaveOne (WO) endodontic files while using the original motor. The safety limits for reciprocating angles were tested by measuring the torsional limit before plastic deformation (TLP) after repetitive torsional loading at gradually increasing load, and after single continuous rotation. Statistical analysis was performed by independent t-test at 95% confidence level. The tested specimens were observed under a scanning electronmicroscope (SEM). Regardless of the testmode, the distortion angle at the TLP was higher forWOG thanWO (p < 0.05), and allwere greater than the 150-degree rotation of the original motor. The mean values of the distortion angle and torque from the single continuous rotation loading were significantly lower than those with repetitive loading movements. Comparing the two systems under SEM, WO showed a catastrophic change in comparison withWOG. Evaluation of the lateral aspects showed longitudinal micro-cracks after 270-degree repetitive movements. After 150-degree repetitive movements, no distorted machining grooves were found in either group, butWO showed evidence of longitudinal micro-cracks. Under the conditions of this study, the torsional loading from the pre-set mode of the dedicated motor forWO was safe forWOG as well.

Original languageEnglish (US)
Article number1150
JournalMaterials
Volume11
Issue number7
DOIs
StatePublished - Jul 6 2018

Fingerprint

Gold
Cracks
Scanning
Plastic deformation
Statistical methods
Machining
Torque

Keywords

  • Distortion angle
  • Reciprocating nickel-titanium file
  • Safety angle
  • Torsional resistance
  • WaveOne
  • WaveOne Gold

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Torsional behavior of WaveOne Gold endodontic file with the dedicated motor of the original WaveOne file. / Ha, Jung Hong; Sigurdsson, Asgeir; De-Deus, Gustavo; Versluis, Antheunis; Kwak, Sang Won; Kim, Hyeon Cheol.

In: Materials, Vol. 11, No. 7, 1150, 06.07.2018.

Research output: Contribution to journalArticle

Ha, Jung Hong ; Sigurdsson, Asgeir ; De-Deus, Gustavo ; Versluis, Antheunis ; Kwak, Sang Won ; Kim, Hyeon Cheol. / Torsional behavior of WaveOne Gold endodontic file with the dedicated motor of the original WaveOne file. In: Materials. 2018 ; Vol. 11, No. 7.
@article{0ff9bf5af5074f2c8f170273c6f1dd1e,
title = "Torsional behavior of WaveOne Gold endodontic file with the dedicated motor of the original WaveOne file",
abstract = "This study compares the safety limits and torsional resistances ofWaveOne Gold (WOG) and WaveOne (WO) endodontic files while using the original motor. The safety limits for reciprocating angles were tested by measuring the torsional limit before plastic deformation (TLP) after repetitive torsional loading at gradually increasing load, and after single continuous rotation. Statistical analysis was performed by independent t-test at 95{\%} confidence level. The tested specimens were observed under a scanning electronmicroscope (SEM). Regardless of the testmode, the distortion angle at the TLP was higher forWOG thanWO (p < 0.05), and allwere greater than the 150-degree rotation of the original motor. The mean values of the distortion angle and torque from the single continuous rotation loading were significantly lower than those with repetitive loading movements. Comparing the two systems under SEM, WO showed a catastrophic change in comparison withWOG. Evaluation of the lateral aspects showed longitudinal micro-cracks after 270-degree repetitive movements. After 150-degree repetitive movements, no distorted machining grooves were found in either group, butWO showed evidence of longitudinal micro-cracks. Under the conditions of this study, the torsional loading from the pre-set mode of the dedicated motor forWO was safe forWOG as well.",
keywords = "Distortion angle, Reciprocating nickel-titanium file, Safety angle, Torsional resistance, WaveOne, WaveOne Gold",
author = "Ha, {Jung Hong} and Asgeir Sigurdsson and Gustavo De-Deus and Antheunis Versluis and Kwak, {Sang Won} and Kim, {Hyeon Cheol}",
year = "2018",
month = "7",
day = "6",
doi = "10.3390/ma11071150",
language = "English (US)",
volume = "11",
journal = "Materials",
issn = "1996-1944",
publisher = "MDPI AG",
number = "7",

}

TY - JOUR

T1 - Torsional behavior of WaveOne Gold endodontic file with the dedicated motor of the original WaveOne file

AU - Ha, Jung Hong

AU - Sigurdsson, Asgeir

AU - De-Deus, Gustavo

AU - Versluis, Antheunis

AU - Kwak, Sang Won

AU - Kim, Hyeon Cheol

PY - 2018/7/6

Y1 - 2018/7/6

N2 - This study compares the safety limits and torsional resistances ofWaveOne Gold (WOG) and WaveOne (WO) endodontic files while using the original motor. The safety limits for reciprocating angles were tested by measuring the torsional limit before plastic deformation (TLP) after repetitive torsional loading at gradually increasing load, and after single continuous rotation. Statistical analysis was performed by independent t-test at 95% confidence level. The tested specimens were observed under a scanning electronmicroscope (SEM). Regardless of the testmode, the distortion angle at the TLP was higher forWOG thanWO (p < 0.05), and allwere greater than the 150-degree rotation of the original motor. The mean values of the distortion angle and torque from the single continuous rotation loading were significantly lower than those with repetitive loading movements. Comparing the two systems under SEM, WO showed a catastrophic change in comparison withWOG. Evaluation of the lateral aspects showed longitudinal micro-cracks after 270-degree repetitive movements. After 150-degree repetitive movements, no distorted machining grooves were found in either group, butWO showed evidence of longitudinal micro-cracks. Under the conditions of this study, the torsional loading from the pre-set mode of the dedicated motor forWO was safe forWOG as well.

AB - This study compares the safety limits and torsional resistances ofWaveOne Gold (WOG) and WaveOne (WO) endodontic files while using the original motor. The safety limits for reciprocating angles were tested by measuring the torsional limit before plastic deformation (TLP) after repetitive torsional loading at gradually increasing load, and after single continuous rotation. Statistical analysis was performed by independent t-test at 95% confidence level. The tested specimens were observed under a scanning electronmicroscope (SEM). Regardless of the testmode, the distortion angle at the TLP was higher forWOG thanWO (p < 0.05), and allwere greater than the 150-degree rotation of the original motor. The mean values of the distortion angle and torque from the single continuous rotation loading were significantly lower than those with repetitive loading movements. Comparing the two systems under SEM, WO showed a catastrophic change in comparison withWOG. Evaluation of the lateral aspects showed longitudinal micro-cracks after 270-degree repetitive movements. After 150-degree repetitive movements, no distorted machining grooves were found in either group, butWO showed evidence of longitudinal micro-cracks. Under the conditions of this study, the torsional loading from the pre-set mode of the dedicated motor forWO was safe forWOG as well.

KW - Distortion angle

KW - Reciprocating nickel-titanium file

KW - Safety angle

KW - Torsional resistance

KW - WaveOne

KW - WaveOne Gold

UR - http://www.scopus.com/inward/record.url?scp=85049637470&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85049637470&partnerID=8YFLogxK

U2 - 10.3390/ma11071150

DO - 10.3390/ma11071150

M3 - Article

AN - SCOPUS:85049637470

VL - 11

JO - Materials

JF - Materials

SN - 1996-1944

IS - 7

M1 - 1150

ER -