THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD

LL SCHEINER LL

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

Few processing areas have grown in speeds and productivity over the past 10 yr as thermoforming. Thanks to the systems approach, better heating and cooling techniques and use of pressure, this trend will continue into the 70's, perhaps not as dramatically but certainly to a significant degree. Technological advances in tooling, heating, cooling and platen speed are briefly disucssed. Survey of production cycles in the past, present and future for various thermoformed products, with introduction of multistation rotary systems as the most important factor affecting time cutting in a cycle time.

Original languageEnglish (US)
Title of host publicationPlastics Technol
Pages50-51
Number of pages2
Volume16
Edition5
StatePublished - May 1970

Fingerprint

Thermoforming
Cooling
Heating
Productivity
Processing

ASJC Scopus subject areas

  • Engineering(all)

Cite this

SCHEINER LL, LL. (1970). THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD. In Plastics Technol (5 ed., Vol. 16, pp. 50-51)

THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD. / SCHEINER LL, LL.

Plastics Technol. Vol. 16 5. ed. 1970. p. 50-51.

Research output: Chapter in Book/Report/Conference proceedingChapter

SCHEINER LL, LL 1970, THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD. in Plastics Technol. 5 edn, vol. 16, pp. 50-51.
SCHEINER LL LL. THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD. In Plastics Technol. 5 ed. Vol. 16. 1970. p. 50-51
SCHEINER LL, LL. / THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD. Plastics Technol. Vol. 16 5. ed. 1970. pp. 50-51
@inbook{38ef427f84fc41d492f0d32c65f6fff7,
title = "THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD",
abstract = "Few processing areas have grown in speeds and productivity over the past 10 yr as thermoforming. Thanks to the systems approach, better heating and cooling techniques and use of pressure, this trend will continue into the 70's, perhaps not as dramatically but certainly to a significant degree. Technological advances in tooling, heating, cooling and platen speed are briefly disucssed. Survey of production cycles in the past, present and future for various thermoformed products, with introduction of multistation rotary systems as the most important factor affecting time cutting in a cycle time.",
author = "{SCHEINER LL}, LL",
year = "1970",
month = "5",
language = "English (US)",
volume = "16",
pages = "50--51",
booktitle = "Plastics Technol",
edition = "5",

}

TY - CHAP

T1 - THERMOFORMING. FASTER CYCLES, HIGHER OUTPUT PORTEND YEARS AHEAD

AU - SCHEINER LL, LL

PY - 1970/5

Y1 - 1970/5

N2 - Few processing areas have grown in speeds and productivity over the past 10 yr as thermoforming. Thanks to the systems approach, better heating and cooling techniques and use of pressure, this trend will continue into the 70's, perhaps not as dramatically but certainly to a significant degree. Technological advances in tooling, heating, cooling and platen speed are briefly disucssed. Survey of production cycles in the past, present and future for various thermoformed products, with introduction of multistation rotary systems as the most important factor affecting time cutting in a cycle time.

AB - Few processing areas have grown in speeds and productivity over the past 10 yr as thermoforming. Thanks to the systems approach, better heating and cooling techniques and use of pressure, this trend will continue into the 70's, perhaps not as dramatically but certainly to a significant degree. Technological advances in tooling, heating, cooling and platen speed are briefly disucssed. Survey of production cycles in the past, present and future for various thermoformed products, with introduction of multistation rotary systems as the most important factor affecting time cutting in a cycle time.

UR - http://www.scopus.com/inward/record.url?scp=0014781841&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0014781841&partnerID=8YFLogxK

M3 - Chapter

AN - SCOPUS:0014781841

VL - 16

SP - 50

EP - 51

BT - Plastics Technol

ER -