Tactile perception of the roughness of 3D-printed textures

Chelsea Tymms, Denis Zorin, Esther P. Gardner

Research output: Contribution to journalArticle

Abstract

Surface roughness is one of the most important qualities in haptic perception. Roughness is a major identifier for judgments of material composition, comfort, and friction and is tied closely to manual dexterity. Some attention has been given to the study of roughness perception in the past, but it has typically focused on noncontrollable natural materials or on a narrow range of artificial materials. The advent of high-resolution three-dimensional (3D) printing technology provides the ability to fabricate arbitrary 3D textures with precise surface geometry to be used in tactile studies. We used parametric modeling and 3D printing to manufacture a set of textured plates with defined element spacing, shape, and arrangement. Using active touch and two-alternative forced-choice protocols, we investigated the contributions of these surface parameters to roughness perception in human subjects. Results indicate that large spatial periods produce higher estimations of roughness (with Weber fraction = 0.19), small texture elements are perceived as rougher than large texture elements of the same wavelength, perceptual differences exist between textures with the same spacing but different arrangements, and roughness equivalencies exist between textures differing along different parameters. We posit that papillary ridges serve as tactile processing units, and neural ensembles encode the spatial profiles of the texture contact area to produce roughness estimates. The stimuli and the manufacturing process may be used in further studies of tactile roughness perception and in related neurophysiological applications. NEW & NOTEWORTHY Surface roughness is an integral quality of texture perception. We manufactured textures using high-resolution 3D printing, which allows precise specification of the surface spatial topography. In human psychophysical experiments we investigated the contributions of specific surface parameters to roughness perception. We found that textures with large spatial periods, small texture elements, and irregular, isotropic arrangements elicit the highest estimations of roughness. We propose that roughness correlates inversely with the total contacted surface area.

Original languageEnglish (US)
Pages (from-to)862-876
Number of pages15
JournalJournal of Neurophysiology
Volume119
Issue number3
DOIs
StatePublished - Mar 1 2018

Fingerprint

Touch Perception
Touch
Aptitude
Friction
Technology
Three Dimensional Printing

Keywords

  • Hand
  • Psychophysics
  • Tactile
  • Touch

ASJC Scopus subject areas

  • Neuroscience(all)
  • Physiology

Cite this

Tactile perception of the roughness of 3D-printed textures. / Tymms, Chelsea; Zorin, Denis; Gardner, Esther P.

In: Journal of Neurophysiology, Vol. 119, No. 3, 01.03.2018, p. 862-876.

Research output: Contribution to journalArticle

Tymms, Chelsea ; Zorin, Denis ; Gardner, Esther P. / Tactile perception of the roughness of 3D-printed textures. In: Journal of Neurophysiology. 2018 ; Vol. 119, No. 3. pp. 862-876.
@article{114af84b381a4f82ab3f56ef05277e17,
title = "Tactile perception of the roughness of 3D-printed textures",
abstract = "Surface roughness is one of the most important qualities in haptic perception. Roughness is a major identifier for judgments of material composition, comfort, and friction and is tied closely to manual dexterity. Some attention has been given to the study of roughness perception in the past, but it has typically focused on noncontrollable natural materials or on a narrow range of artificial materials. The advent of high-resolution three-dimensional (3D) printing technology provides the ability to fabricate arbitrary 3D textures with precise surface geometry to be used in tactile studies. We used parametric modeling and 3D printing to manufacture a set of textured plates with defined element spacing, shape, and arrangement. Using active touch and two-alternative forced-choice protocols, we investigated the contributions of these surface parameters to roughness perception in human subjects. Results indicate that large spatial periods produce higher estimations of roughness (with Weber fraction = 0.19), small texture elements are perceived as rougher than large texture elements of the same wavelength, perceptual differences exist between textures with the same spacing but different arrangements, and roughness equivalencies exist between textures differing along different parameters. We posit that papillary ridges serve as tactile processing units, and neural ensembles encode the spatial profiles of the texture contact area to produce roughness estimates. The stimuli and the manufacturing process may be used in further studies of tactile roughness perception and in related neurophysiological applications. NEW & NOTEWORTHY Surface roughness is an integral quality of texture perception. We manufactured textures using high-resolution 3D printing, which allows precise specification of the surface spatial topography. In human psychophysical experiments we investigated the contributions of specific surface parameters to roughness perception. We found that textures with large spatial periods, small texture elements, and irregular, isotropic arrangements elicit the highest estimations of roughness. We propose that roughness correlates inversely with the total contacted surface area.",
keywords = "Hand, Psychophysics, Tactile, Touch",
author = "Chelsea Tymms and Denis Zorin and Gardner, {Esther P.}",
year = "2018",
month = "3",
day = "1",
doi = "10.1152/jn.00564.2017",
language = "English (US)",
volume = "119",
pages = "862--876",
journal = "Journal of Neurophysiology",
issn = "0022-3077",
publisher = "American Physiological Society",
number = "3",

}

TY - JOUR

T1 - Tactile perception of the roughness of 3D-printed textures

AU - Tymms, Chelsea

AU - Zorin, Denis

AU - Gardner, Esther P.

PY - 2018/3/1

Y1 - 2018/3/1

N2 - Surface roughness is one of the most important qualities in haptic perception. Roughness is a major identifier for judgments of material composition, comfort, and friction and is tied closely to manual dexterity. Some attention has been given to the study of roughness perception in the past, but it has typically focused on noncontrollable natural materials or on a narrow range of artificial materials. The advent of high-resolution three-dimensional (3D) printing technology provides the ability to fabricate arbitrary 3D textures with precise surface geometry to be used in tactile studies. We used parametric modeling and 3D printing to manufacture a set of textured plates with defined element spacing, shape, and arrangement. Using active touch and two-alternative forced-choice protocols, we investigated the contributions of these surface parameters to roughness perception in human subjects. Results indicate that large spatial periods produce higher estimations of roughness (with Weber fraction = 0.19), small texture elements are perceived as rougher than large texture elements of the same wavelength, perceptual differences exist between textures with the same spacing but different arrangements, and roughness equivalencies exist between textures differing along different parameters. We posit that papillary ridges serve as tactile processing units, and neural ensembles encode the spatial profiles of the texture contact area to produce roughness estimates. The stimuli and the manufacturing process may be used in further studies of tactile roughness perception and in related neurophysiological applications. NEW & NOTEWORTHY Surface roughness is an integral quality of texture perception. We manufactured textures using high-resolution 3D printing, which allows precise specification of the surface spatial topography. In human psychophysical experiments we investigated the contributions of specific surface parameters to roughness perception. We found that textures with large spatial periods, small texture elements, and irregular, isotropic arrangements elicit the highest estimations of roughness. We propose that roughness correlates inversely with the total contacted surface area.

AB - Surface roughness is one of the most important qualities in haptic perception. Roughness is a major identifier for judgments of material composition, comfort, and friction and is tied closely to manual dexterity. Some attention has been given to the study of roughness perception in the past, but it has typically focused on noncontrollable natural materials or on a narrow range of artificial materials. The advent of high-resolution three-dimensional (3D) printing technology provides the ability to fabricate arbitrary 3D textures with precise surface geometry to be used in tactile studies. We used parametric modeling and 3D printing to manufacture a set of textured plates with defined element spacing, shape, and arrangement. Using active touch and two-alternative forced-choice protocols, we investigated the contributions of these surface parameters to roughness perception in human subjects. Results indicate that large spatial periods produce higher estimations of roughness (with Weber fraction = 0.19), small texture elements are perceived as rougher than large texture elements of the same wavelength, perceptual differences exist between textures with the same spacing but different arrangements, and roughness equivalencies exist between textures differing along different parameters. We posit that papillary ridges serve as tactile processing units, and neural ensembles encode the spatial profiles of the texture contact area to produce roughness estimates. The stimuli and the manufacturing process may be used in further studies of tactile roughness perception and in related neurophysiological applications. NEW & NOTEWORTHY Surface roughness is an integral quality of texture perception. We manufactured textures using high-resolution 3D printing, which allows precise specification of the surface spatial topography. In human psychophysical experiments we investigated the contributions of specific surface parameters to roughness perception. We found that textures with large spatial periods, small texture elements, and irregular, isotropic arrangements elicit the highest estimations of roughness. We propose that roughness correlates inversely with the total contacted surface area.

KW - Hand

KW - Psychophysics

KW - Tactile

KW - Touch

UR - http://www.scopus.com/inward/record.url?scp=85043371888&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85043371888&partnerID=8YFLogxK

U2 - 10.1152/jn.00564.2017

DO - 10.1152/jn.00564.2017

M3 - Article

C2 - 29167326

AN - SCOPUS:85043371888

VL - 119

SP - 862

EP - 876

JO - Journal of Neurophysiology

JF - Journal of Neurophysiology

SN - 0022-3077

IS - 3

ER -