Spatial and temporal properties of illusory contours and amodal boundary completion

Dario L. Ringach, Robert Shapley

Research output: Contribution to journalArticle

Abstract

Spatial and temporal properties of illusory contours and amodal completion were investigated using a shape discrimination task Performance was characterized as accuracy of angular discrimination of the inducing figures ('pacmen') in a two-alternative forced choice (2AFC) paradigm. First, we compared performance when four 'pacmen' were organized into Kanizsa-like figures (squares and small deformations of squares) which produced the percept of illusory contours (ICs), with performance obtained with all four 'pacmen' facing in the same direction, when no illusory contours were seen. Then, we found that it was possible to interfere with boundary completion and degrade performance with masking lines placed between the inducers of a Kanizsa figure. From these experiments we concluded that performance in the shape discrimination task depended on boundary completion. Next, the dependence of contour-dependent performance on the spatial scale of the figures was examined. Threshold angular discrimination was approximately scale-invariant and subjects were able to integrate visual information across gaps as large as 13 deg of visual angle. Performance in the shape recognition task for illusory and amodally completed figures was also measured. Similar accuracy was obtained either when the boundaries were modally or amodally completed. Finally, we used shape discrimination in conjunction with backward masking to explore the dynamics of boundary completion. Two different phases of the boundary completion process were observed. The first phase was revealed when the inducers were locally masked, and took ≃ 117 msec. A second phase lasted an additional 140-200 msec after the inducers were masked.

Original languageEnglish (US)
Pages (from-to)3037-3050
Number of pages14
JournalVision Research
Volume36
Issue number19
DOIs
StatePublished - Oct 1996

Fingerprint

Task Performance and Analysis
Direction compound

Keywords

  • Amodal completion
  • Boundary integration
  • Illusory contours

ASJC Scopus subject areas

  • Ophthalmology
  • Sensory Systems

Cite this

Spatial and temporal properties of illusory contours and amodal boundary completion. / Ringach, Dario L.; Shapley, Robert.

In: Vision Research, Vol. 36, No. 19, 10.1996, p. 3037-3050.

Research output: Contribution to journalArticle

@article{4ef9acc3439f40698aa1ff722f46e3fd,
title = "Spatial and temporal properties of illusory contours and amodal boundary completion",
abstract = "Spatial and temporal properties of illusory contours and amodal completion were investigated using a shape discrimination task Performance was characterized as accuracy of angular discrimination of the inducing figures ('pacmen') in a two-alternative forced choice (2AFC) paradigm. First, we compared performance when four 'pacmen' were organized into Kanizsa-like figures (squares and small deformations of squares) which produced the percept of illusory contours (ICs), with performance obtained with all four 'pacmen' facing in the same direction, when no illusory contours were seen. Then, we found that it was possible to interfere with boundary completion and degrade performance with masking lines placed between the inducers of a Kanizsa figure. From these experiments we concluded that performance in the shape discrimination task depended on boundary completion. Next, the dependence of contour-dependent performance on the spatial scale of the figures was examined. Threshold angular discrimination was approximately scale-invariant and subjects were able to integrate visual information across gaps as large as 13 deg of visual angle. Performance in the shape recognition task for illusory and amodally completed figures was also measured. Similar accuracy was obtained either when the boundaries were modally or amodally completed. Finally, we used shape discrimination in conjunction with backward masking to explore the dynamics of boundary completion. Two different phases of the boundary completion process were observed. The first phase was revealed when the inducers were locally masked, and took ≃ 117 msec. A second phase lasted an additional 140-200 msec after the inducers were masked.",
keywords = "Amodal completion, Boundary integration, Illusory contours",
author = "Ringach, {Dario L.} and Robert Shapley",
year = "1996",
month = "10",
doi = "10.1016/0042-6989(96)00062-4",
language = "English (US)",
volume = "36",
pages = "3037--3050",
journal = "Vision Research",
issn = "0042-6989",
publisher = "Elsevier Limited",
number = "19",

}

TY - JOUR

T1 - Spatial and temporal properties of illusory contours and amodal boundary completion

AU - Ringach, Dario L.

AU - Shapley, Robert

PY - 1996/10

Y1 - 1996/10

N2 - Spatial and temporal properties of illusory contours and amodal completion were investigated using a shape discrimination task Performance was characterized as accuracy of angular discrimination of the inducing figures ('pacmen') in a two-alternative forced choice (2AFC) paradigm. First, we compared performance when four 'pacmen' were organized into Kanizsa-like figures (squares and small deformations of squares) which produced the percept of illusory contours (ICs), with performance obtained with all four 'pacmen' facing in the same direction, when no illusory contours were seen. Then, we found that it was possible to interfere with boundary completion and degrade performance with masking lines placed between the inducers of a Kanizsa figure. From these experiments we concluded that performance in the shape discrimination task depended on boundary completion. Next, the dependence of contour-dependent performance on the spatial scale of the figures was examined. Threshold angular discrimination was approximately scale-invariant and subjects were able to integrate visual information across gaps as large as 13 deg of visual angle. Performance in the shape recognition task for illusory and amodally completed figures was also measured. Similar accuracy was obtained either when the boundaries were modally or amodally completed. Finally, we used shape discrimination in conjunction with backward masking to explore the dynamics of boundary completion. Two different phases of the boundary completion process were observed. The first phase was revealed when the inducers were locally masked, and took ≃ 117 msec. A second phase lasted an additional 140-200 msec after the inducers were masked.

AB - Spatial and temporal properties of illusory contours and amodal completion were investigated using a shape discrimination task Performance was characterized as accuracy of angular discrimination of the inducing figures ('pacmen') in a two-alternative forced choice (2AFC) paradigm. First, we compared performance when four 'pacmen' were organized into Kanizsa-like figures (squares and small deformations of squares) which produced the percept of illusory contours (ICs), with performance obtained with all four 'pacmen' facing in the same direction, when no illusory contours were seen. Then, we found that it was possible to interfere with boundary completion and degrade performance with masking lines placed between the inducers of a Kanizsa figure. From these experiments we concluded that performance in the shape discrimination task depended on boundary completion. Next, the dependence of contour-dependent performance on the spatial scale of the figures was examined. Threshold angular discrimination was approximately scale-invariant and subjects were able to integrate visual information across gaps as large as 13 deg of visual angle. Performance in the shape recognition task for illusory and amodally completed figures was also measured. Similar accuracy was obtained either when the boundaries were modally or amodally completed. Finally, we used shape discrimination in conjunction with backward masking to explore the dynamics of boundary completion. Two different phases of the boundary completion process were observed. The first phase was revealed when the inducers were locally masked, and took ≃ 117 msec. A second phase lasted an additional 140-200 msec after the inducers were masked.

KW - Amodal completion

KW - Boundary integration

KW - Illusory contours

UR - http://www.scopus.com/inward/record.url?scp=0030271891&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030271891&partnerID=8YFLogxK

U2 - 10.1016/0042-6989(96)00062-4

DO - 10.1016/0042-6989(96)00062-4

M3 - Article

C2 - 8917767

AN - SCOPUS:0030271891

VL - 36

SP - 3037

EP - 3050

JO - Vision Research

JF - Vision Research

SN - 0042-6989

IS - 19

ER -