Simulation of intense microwave pulse propagation in air breakdown environment

Y. S. Zhang, Spencer Kuo

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Summary form only given. When a high-power microwave pulse propagates in air with a breakdown threshold below the wave field of the pulse, the ionization of the air will occur. The electrons produced will attenuate the field amplitude at the tail portion of the pulse. If the electron density reaches the cutoff density of the microwave pulse, the reflection caused by cutoff will even cause severe tail erosion. An experiment was conducted to examine the phenomena. In the experiment, a 1-MW microwave pulse (1.1 μs) was propagated through a large Plexiglas chamber filled with dry air at low pressure at one side of the chamber, and was received and monitored at the other side. Two different degrees of tail erosion caused by two different mechanisms were identified experimentally. A computer simulation of the experiment was then carried out. Two coupled partial differential equations (PDEs) were used to describe the intense microwave pulse propagating in the air breakdown environment. A software package developed to solve PDEs was used to solve the equations with boundary conditions satisfying the experimental situation. Calculations of the pulse intensity and electron density as a function of space and time were compared with data, with good agreement.

Original languageEnglish (US)
Title of host publicationIEEE Conference Record - Abstracts
PublisherPubl by IEEE
Pages172
Number of pages1
StatePublished - 1990
Event1990 IEEE International Conference on Plasma Science - Oakland, CA, USA
Duration: May 21 1990May 23 1990

Other

Other1990 IEEE International Conference on Plasma Science
CityOakland, CA, USA
Period5/21/905/23/90

Fingerprint

Microwaves
Air
Partial differential equations
Carrier concentration
Erosion
Experiments
Software packages
Ionization
Boundary conditions
Electrons
Computer simulation

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Zhang, Y. S., & Kuo, S. (1990). Simulation of intense microwave pulse propagation in air breakdown environment. In IEEE Conference Record - Abstracts (pp. 172). Publ by IEEE.

Simulation of intense microwave pulse propagation in air breakdown environment. / Zhang, Y. S.; Kuo, Spencer.

IEEE Conference Record - Abstracts. Publ by IEEE, 1990. p. 172.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zhang, YS & Kuo, S 1990, Simulation of intense microwave pulse propagation in air breakdown environment. in IEEE Conference Record - Abstracts. Publ by IEEE, pp. 172, 1990 IEEE International Conference on Plasma Science, Oakland, CA, USA, 5/21/90.
Zhang YS, Kuo S. Simulation of intense microwave pulse propagation in air breakdown environment. In IEEE Conference Record - Abstracts. Publ by IEEE. 1990. p. 172
Zhang, Y. S. ; Kuo, Spencer. / Simulation of intense microwave pulse propagation in air breakdown environment. IEEE Conference Record - Abstracts. Publ by IEEE, 1990. pp. 172
@inproceedings{c9170641f2324f839121dccde517d081,
title = "Simulation of intense microwave pulse propagation in air breakdown environment",
abstract = "Summary form only given. When a high-power microwave pulse propagates in air with a breakdown threshold below the wave field of the pulse, the ionization of the air will occur. The electrons produced will attenuate the field amplitude at the tail portion of the pulse. If the electron density reaches the cutoff density of the microwave pulse, the reflection caused by cutoff will even cause severe tail erosion. An experiment was conducted to examine the phenomena. In the experiment, a 1-MW microwave pulse (1.1 μs) was propagated through a large Plexiglas chamber filled with dry air at low pressure at one side of the chamber, and was received and monitored at the other side. Two different degrees of tail erosion caused by two different mechanisms were identified experimentally. A computer simulation of the experiment was then carried out. Two coupled partial differential equations (PDEs) were used to describe the intense microwave pulse propagating in the air breakdown environment. A software package developed to solve PDEs was used to solve the equations with boundary conditions satisfying the experimental situation. Calculations of the pulse intensity and electron density as a function of space and time were compared with data, with good agreement.",
author = "Zhang, {Y. S.} and Spencer Kuo",
year = "1990",
language = "English (US)",
pages = "172",
booktitle = "IEEE Conference Record - Abstracts",
publisher = "Publ by IEEE",

}

TY - GEN

T1 - Simulation of intense microwave pulse propagation in air breakdown environment

AU - Zhang, Y. S.

AU - Kuo, Spencer

PY - 1990

Y1 - 1990

N2 - Summary form only given. When a high-power microwave pulse propagates in air with a breakdown threshold below the wave field of the pulse, the ionization of the air will occur. The electrons produced will attenuate the field amplitude at the tail portion of the pulse. If the electron density reaches the cutoff density of the microwave pulse, the reflection caused by cutoff will even cause severe tail erosion. An experiment was conducted to examine the phenomena. In the experiment, a 1-MW microwave pulse (1.1 μs) was propagated through a large Plexiglas chamber filled with dry air at low pressure at one side of the chamber, and was received and monitored at the other side. Two different degrees of tail erosion caused by two different mechanisms were identified experimentally. A computer simulation of the experiment was then carried out. Two coupled partial differential equations (PDEs) were used to describe the intense microwave pulse propagating in the air breakdown environment. A software package developed to solve PDEs was used to solve the equations with boundary conditions satisfying the experimental situation. Calculations of the pulse intensity and electron density as a function of space and time were compared with data, with good agreement.

AB - Summary form only given. When a high-power microwave pulse propagates in air with a breakdown threshold below the wave field of the pulse, the ionization of the air will occur. The electrons produced will attenuate the field amplitude at the tail portion of the pulse. If the electron density reaches the cutoff density of the microwave pulse, the reflection caused by cutoff will even cause severe tail erosion. An experiment was conducted to examine the phenomena. In the experiment, a 1-MW microwave pulse (1.1 μs) was propagated through a large Plexiglas chamber filled with dry air at low pressure at one side of the chamber, and was received and monitored at the other side. Two different degrees of tail erosion caused by two different mechanisms were identified experimentally. A computer simulation of the experiment was then carried out. Two coupled partial differential equations (PDEs) were used to describe the intense microwave pulse propagating in the air breakdown environment. A software package developed to solve PDEs was used to solve the equations with boundary conditions satisfying the experimental situation. Calculations of the pulse intensity and electron density as a function of space and time were compared with data, with good agreement.

UR - http://www.scopus.com/inward/record.url?scp=0025680166&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0025680166&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0025680166

SP - 172

BT - IEEE Conference Record - Abstracts

PB - Publ by IEEE

ER -