Self-regulation of cu/sn ratio in the synthesis of Cu2ZnSnS4 films

Melissa C. Johnson, Cody Wrasman, Xin Zhang, Michael Manno, C. Leighton, Eray Aydil

Research output: Contribution to journalArticle

Abstract

There has been a tremendous recent surge of interest in copper zinc tin sulfide (Cu2ZnSnS4, CZTS) as a photovoltaic material, because its optical and electronic properties are well-suited for solar cells, and its elemental constituents are abundant in the earths crust. Here we have studied the formation mechanisms of CZTS films, and the factors that control the cation stoichiometry during ex situ sulfidation of precursor Cu-Zn-Sn alloy films in a closed isothermal system. We find that the Cu/Sn ratio in CZTS is self-regulating and approaches 2, regardless of the initial composition of the precursor films, provided that adequate Sn is available in the sulfidation system. If precursor films are initially tin rich, excess Sn evaporates in the form of SnS. If precursor films are initially Sn-deficient, the inclusion of solid Sn in the sulfidation ampule readily generates SnS vapor, which mitigates the films Sn deficiency to return the Cu/Sn ratio to 2. When sulfidized for sufficiently long times at sufficiently high temperatures (e.g., 600 °C, 8 h), films with similar Cu/Zn ratios exhibit similar phase compositions, such that if Cu/Zn >2, a Cu2SnS3 impurity phase is present in addition to CZTS, and if Cu/Zn < 2, a ZnS impurity phase occurs. To achieve phase-pure, void-free films, Sn-deficient precursor films with Cu/Zn in the desired range (typically close to, but slightly less than 2) can be sulfidized with excess Sn in a closed system, or a system that maintains a SnS vapor pressure over the film. Time-dependent sulfidation experiments were performed to elucidate the mechanism of this Sn self-regulation. During the formation of CZTS, almost all of the Sn is found to leave the film as SnS, later reincorporation of the Sn occurring through reactions between SnS vapor and CuS to form Cu2SnS3. The ZnS and Cu2SnS3 phases within the films then interdiffuse to form CZTS. Because Cu/Sn is 2 in both Cu2SnS3 and CZTS, the Cu/Sn ratio tends to 2 when sufficient Sn is included in the system to consume all Cu. This strategy is useful for avoiding Cu-S minority phases, provided the films are sulfidized to the point of equilibrium phase composition.

Original languageEnglish (US)
Pages (from-to)2507-2514
Number of pages8
JournalChemistry of Materials
Volume27
Issue number7
DOIs
StatePublished - Apr 14 2015

Fingerprint

Phase composition
Cu2ZnSnS4
Tin
Vapors
Impurities
Vapor pressure
Stoichiometry
Electronic properties
Cations
Zinc
Copper
Solar cells
Optical properties
Positive ions
Earth (planet)
Chemical analysis
Experiments
Temperature
tin sulfide
cupric sulfide

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Chemistry

Cite this

Self-regulation of cu/sn ratio in the synthesis of Cu2ZnSnS4 films. / Johnson, Melissa C.; Wrasman, Cody; Zhang, Xin; Manno, Michael; Leighton, C.; Aydil, Eray.

In: Chemistry of Materials, Vol. 27, No. 7, 14.04.2015, p. 2507-2514.

Research output: Contribution to journalArticle

Johnson, MC, Wrasman, C, Zhang, X, Manno, M, Leighton, C & Aydil, E 2015, 'Self-regulation of cu/sn ratio in the synthesis of Cu2ZnSnS4 films', Chemistry of Materials, vol. 27, no. 7, pp. 2507-2514. https://doi.org/10.1021/acs.chemmater.5b00108
Johnson, Melissa C. ; Wrasman, Cody ; Zhang, Xin ; Manno, Michael ; Leighton, C. ; Aydil, Eray. / Self-regulation of cu/sn ratio in the synthesis of Cu2ZnSnS4 films. In: Chemistry of Materials. 2015 ; Vol. 27, No. 7. pp. 2507-2514.
@article{f4fd3ea23d8546c09c710bc7f7b5c0e1,
title = "Self-regulation of cu/sn ratio in the synthesis of Cu2ZnSnS4 films",
abstract = "There has been a tremendous recent surge of interest in copper zinc tin sulfide (Cu2ZnSnS4, CZTS) as a photovoltaic material, because its optical and electronic properties are well-suited for solar cells, and its elemental constituents are abundant in the earths crust. Here we have studied the formation mechanisms of CZTS films, and the factors that control the cation stoichiometry during ex situ sulfidation of precursor Cu-Zn-Sn alloy films in a closed isothermal system. We find that the Cu/Sn ratio in CZTS is self-regulating and approaches 2, regardless of the initial composition of the precursor films, provided that adequate Sn is available in the sulfidation system. If precursor films are initially tin rich, excess Sn evaporates in the form of SnS. If precursor films are initially Sn-deficient, the inclusion of solid Sn in the sulfidation ampule readily generates SnS vapor, which mitigates the films Sn deficiency to return the Cu/Sn ratio to 2. When sulfidized for sufficiently long times at sufficiently high temperatures (e.g., 600 °C, 8 h), films with similar Cu/Zn ratios exhibit similar phase compositions, such that if Cu/Zn >2, a Cu2SnS3 impurity phase is present in addition to CZTS, and if Cu/Zn < 2, a ZnS impurity phase occurs. To achieve phase-pure, void-free films, Sn-deficient precursor films with Cu/Zn in the desired range (typically close to, but slightly less than 2) can be sulfidized with excess Sn in a closed system, or a system that maintains a SnS vapor pressure over the film. Time-dependent sulfidation experiments were performed to elucidate the mechanism of this Sn self-regulation. During the formation of CZTS, almost all of the Sn is found to leave the film as SnS, later reincorporation of the Sn occurring through reactions between SnS vapor and CuS to form Cu2SnS3. The ZnS and Cu2SnS3 phases within the films then interdiffuse to form CZTS. Because Cu/Sn is 2 in both Cu2SnS3 and CZTS, the Cu/Sn ratio tends to 2 when sufficient Sn is included in the system to consume all Cu. This strategy is useful for avoiding Cu-S minority phases, provided the films are sulfidized to the point of equilibrium phase composition.",
author = "Johnson, {Melissa C.} and Cody Wrasman and Xin Zhang and Michael Manno and C. Leighton and Eray Aydil",
year = "2015",
month = "4",
day = "14",
doi = "10.1021/acs.chemmater.5b00108",
language = "English (US)",
volume = "27",
pages = "2507--2514",
journal = "Chemistry of Materials",
issn = "0897-4756",
publisher = "American Chemical Society",
number = "7",

}

TY - JOUR

T1 - Self-regulation of cu/sn ratio in the synthesis of Cu2ZnSnS4 films

AU - Johnson, Melissa C.

AU - Wrasman, Cody

AU - Zhang, Xin

AU - Manno, Michael

AU - Leighton, C.

AU - Aydil, Eray

PY - 2015/4/14

Y1 - 2015/4/14

N2 - There has been a tremendous recent surge of interest in copper zinc tin sulfide (Cu2ZnSnS4, CZTS) as a photovoltaic material, because its optical and electronic properties are well-suited for solar cells, and its elemental constituents are abundant in the earths crust. Here we have studied the formation mechanisms of CZTS films, and the factors that control the cation stoichiometry during ex situ sulfidation of precursor Cu-Zn-Sn alloy films in a closed isothermal system. We find that the Cu/Sn ratio in CZTS is self-regulating and approaches 2, regardless of the initial composition of the precursor films, provided that adequate Sn is available in the sulfidation system. If precursor films are initially tin rich, excess Sn evaporates in the form of SnS. If precursor films are initially Sn-deficient, the inclusion of solid Sn in the sulfidation ampule readily generates SnS vapor, which mitigates the films Sn deficiency to return the Cu/Sn ratio to 2. When sulfidized for sufficiently long times at sufficiently high temperatures (e.g., 600 °C, 8 h), films with similar Cu/Zn ratios exhibit similar phase compositions, such that if Cu/Zn >2, a Cu2SnS3 impurity phase is present in addition to CZTS, and if Cu/Zn < 2, a ZnS impurity phase occurs. To achieve phase-pure, void-free films, Sn-deficient precursor films with Cu/Zn in the desired range (typically close to, but slightly less than 2) can be sulfidized with excess Sn in a closed system, or a system that maintains a SnS vapor pressure over the film. Time-dependent sulfidation experiments were performed to elucidate the mechanism of this Sn self-regulation. During the formation of CZTS, almost all of the Sn is found to leave the film as SnS, later reincorporation of the Sn occurring through reactions between SnS vapor and CuS to form Cu2SnS3. The ZnS and Cu2SnS3 phases within the films then interdiffuse to form CZTS. Because Cu/Sn is 2 in both Cu2SnS3 and CZTS, the Cu/Sn ratio tends to 2 when sufficient Sn is included in the system to consume all Cu. This strategy is useful for avoiding Cu-S minority phases, provided the films are sulfidized to the point of equilibrium phase composition.

AB - There has been a tremendous recent surge of interest in copper zinc tin sulfide (Cu2ZnSnS4, CZTS) as a photovoltaic material, because its optical and electronic properties are well-suited for solar cells, and its elemental constituents are abundant in the earths crust. Here we have studied the formation mechanisms of CZTS films, and the factors that control the cation stoichiometry during ex situ sulfidation of precursor Cu-Zn-Sn alloy films in a closed isothermal system. We find that the Cu/Sn ratio in CZTS is self-regulating and approaches 2, regardless of the initial composition of the precursor films, provided that adequate Sn is available in the sulfidation system. If precursor films are initially tin rich, excess Sn evaporates in the form of SnS. If precursor films are initially Sn-deficient, the inclusion of solid Sn in the sulfidation ampule readily generates SnS vapor, which mitigates the films Sn deficiency to return the Cu/Sn ratio to 2. When sulfidized for sufficiently long times at sufficiently high temperatures (e.g., 600 °C, 8 h), films with similar Cu/Zn ratios exhibit similar phase compositions, such that if Cu/Zn >2, a Cu2SnS3 impurity phase is present in addition to CZTS, and if Cu/Zn < 2, a ZnS impurity phase occurs. To achieve phase-pure, void-free films, Sn-deficient precursor films with Cu/Zn in the desired range (typically close to, but slightly less than 2) can be sulfidized with excess Sn in a closed system, or a system that maintains a SnS vapor pressure over the film. Time-dependent sulfidation experiments were performed to elucidate the mechanism of this Sn self-regulation. During the formation of CZTS, almost all of the Sn is found to leave the film as SnS, later reincorporation of the Sn occurring through reactions between SnS vapor and CuS to form Cu2SnS3. The ZnS and Cu2SnS3 phases within the films then interdiffuse to form CZTS. Because Cu/Sn is 2 in both Cu2SnS3 and CZTS, the Cu/Sn ratio tends to 2 when sufficient Sn is included in the system to consume all Cu. This strategy is useful for avoiding Cu-S minority phases, provided the films are sulfidized to the point of equilibrium phase composition.

UR - http://www.scopus.com/inward/record.url?scp=84927778654&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84927778654&partnerID=8YFLogxK

U2 - 10.1021/acs.chemmater.5b00108

DO - 10.1021/acs.chemmater.5b00108

M3 - Article

VL - 27

SP - 2507

EP - 2514

JO - Chemistry of Materials

JF - Chemistry of Materials

SN - 0897-4756

IS - 7

ER -