Scalable fabrication of multifunctional freestanding carbon nanotube/polymer composite thin films for energy conversion

Xiaokai Li, Forrest Gittleson, Marcelo Carmo, Ryan C. Sekol, Andre Taylor

Research output: Contribution to journalArticle

Abstract

Translating the unique properties of individual single-walled carbon nanotubes (SWNTs) to the macroscale while simultaneously incorporating additional functionalities into composites has been stymied by inadequate assembly methods. Here we describe a technique for developing multifunctional SWNT/polymer composite thin films that provides a fundamental engineering basis to bridge the gap between their nano- and macroscale properties. Selected polymers are infiltrated into a Mayer rod coated conductive SWNT network to fabricate solar cell transparent conductive electrodes (TCEs), fuel cell membrane electrode assemblies (MEAs), and lithium ion battery electrodes. Our TCEs have an outstanding optoelectronic figure of merit σ dc/ σ ac of 19.4 and roughness of 3.8 nm yet are also mechanically robust enough to withstand delamination, a step toward scratch resistance necessary for flexible electronics. Our MEAs show platinum utilization as high as 1550 mW/mg Pt, demonstrating our technique's ability to integrate ionic conductivity of the polymer with electrical conductivity of the SWNTs at the Pt surface. Our battery anodes, which show reversible capacity of ∼850 mAh/g after 15 cycles, demonstrate the integration of electrode and separator to simplify device architecture and decrease overall weight. Each of these applications demonstrates our technique's ability to maintain the conductivity of SWNT networks and their dispersion within a polymer matrix while concurrently optimizing key complementary properties of the composite. Here, we lay the foundation for the assembly of nanotubes and nanostructured components (rods, wires, particles, etc.) into macroscopic multifunctional materials using a low-cost and scalable solution-based processing technique.

Original languageEnglish (US)
Pages (from-to)1347-1356
Number of pages10
JournalACS Nano
Volume6
Issue number2
DOIs
StatePublished - Feb 28 2012

Fingerprint

Carbon Nanotubes
energy conversion
Composite films
Energy conversion
Single-walled carbon nanotubes (SWCN)
Carbon nanotubes
Polymers
carbon nanotubes
Fabrication
Thin films
Electrodes
fabrication
composite materials
electrodes
polymers
thin films
assemblies
electric batteries
rods
assembly

Keywords

  • carbon nanotube
  • composite
  • doping
  • fuel cell
  • lithium ion battery
  • solar cell

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)
  • Physics and Astronomy(all)

Cite this

Scalable fabrication of multifunctional freestanding carbon nanotube/polymer composite thin films for energy conversion. / Li, Xiaokai; Gittleson, Forrest; Carmo, Marcelo; Sekol, Ryan C.; Taylor, Andre.

In: ACS Nano, Vol. 6, No. 2, 28.02.2012, p. 1347-1356.

Research output: Contribution to journalArticle

Li, Xiaokai ; Gittleson, Forrest ; Carmo, Marcelo ; Sekol, Ryan C. ; Taylor, Andre. / Scalable fabrication of multifunctional freestanding carbon nanotube/polymer composite thin films for energy conversion. In: ACS Nano. 2012 ; Vol. 6, No. 2. pp. 1347-1356.
@article{72836e893d094fcab18cba17e97f4f4f,
title = "Scalable fabrication of multifunctional freestanding carbon nanotube/polymer composite thin films for energy conversion",
abstract = "Translating the unique properties of individual single-walled carbon nanotubes (SWNTs) to the macroscale while simultaneously incorporating additional functionalities into composites has been stymied by inadequate assembly methods. Here we describe a technique for developing multifunctional SWNT/polymer composite thin films that provides a fundamental engineering basis to bridge the gap between their nano- and macroscale properties. Selected polymers are infiltrated into a Mayer rod coated conductive SWNT network to fabricate solar cell transparent conductive electrodes (TCEs), fuel cell membrane electrode assemblies (MEAs), and lithium ion battery electrodes. Our TCEs have an outstanding optoelectronic figure of merit σ dc/ σ ac of 19.4 and roughness of 3.8 nm yet are also mechanically robust enough to withstand delamination, a step toward scratch resistance necessary for flexible electronics. Our MEAs show platinum utilization as high as 1550 mW/mg Pt, demonstrating our technique's ability to integrate ionic conductivity of the polymer with electrical conductivity of the SWNTs at the Pt surface. Our battery anodes, which show reversible capacity of ∼850 mAh/g after 15 cycles, demonstrate the integration of electrode and separator to simplify device architecture and decrease overall weight. Each of these applications demonstrates our technique's ability to maintain the conductivity of SWNT networks and their dispersion within a polymer matrix while concurrently optimizing key complementary properties of the composite. Here, we lay the foundation for the assembly of nanotubes and nanostructured components (rods, wires, particles, etc.) into macroscopic multifunctional materials using a low-cost and scalable solution-based processing technique.",
keywords = "carbon nanotube, composite, doping, fuel cell, lithium ion battery, solar cell",
author = "Xiaokai Li and Forrest Gittleson and Marcelo Carmo and Sekol, {Ryan C.} and Andre Taylor",
year = "2012",
month = "2",
day = "28",
doi = "10.1021/nn2041544",
language = "English (US)",
volume = "6",
pages = "1347--1356",
journal = "ACS Nano",
issn = "1936-0851",
publisher = "American Chemical Society",
number = "2",

}

TY - JOUR

T1 - Scalable fabrication of multifunctional freestanding carbon nanotube/polymer composite thin films for energy conversion

AU - Li, Xiaokai

AU - Gittleson, Forrest

AU - Carmo, Marcelo

AU - Sekol, Ryan C.

AU - Taylor, Andre

PY - 2012/2/28

Y1 - 2012/2/28

N2 - Translating the unique properties of individual single-walled carbon nanotubes (SWNTs) to the macroscale while simultaneously incorporating additional functionalities into composites has been stymied by inadequate assembly methods. Here we describe a technique for developing multifunctional SWNT/polymer composite thin films that provides a fundamental engineering basis to bridge the gap between their nano- and macroscale properties. Selected polymers are infiltrated into a Mayer rod coated conductive SWNT network to fabricate solar cell transparent conductive electrodes (TCEs), fuel cell membrane electrode assemblies (MEAs), and lithium ion battery electrodes. Our TCEs have an outstanding optoelectronic figure of merit σ dc/ σ ac of 19.4 and roughness of 3.8 nm yet are also mechanically robust enough to withstand delamination, a step toward scratch resistance necessary for flexible electronics. Our MEAs show platinum utilization as high as 1550 mW/mg Pt, demonstrating our technique's ability to integrate ionic conductivity of the polymer with electrical conductivity of the SWNTs at the Pt surface. Our battery anodes, which show reversible capacity of ∼850 mAh/g after 15 cycles, demonstrate the integration of electrode and separator to simplify device architecture and decrease overall weight. Each of these applications demonstrates our technique's ability to maintain the conductivity of SWNT networks and their dispersion within a polymer matrix while concurrently optimizing key complementary properties of the composite. Here, we lay the foundation for the assembly of nanotubes and nanostructured components (rods, wires, particles, etc.) into macroscopic multifunctional materials using a low-cost and scalable solution-based processing technique.

AB - Translating the unique properties of individual single-walled carbon nanotubes (SWNTs) to the macroscale while simultaneously incorporating additional functionalities into composites has been stymied by inadequate assembly methods. Here we describe a technique for developing multifunctional SWNT/polymer composite thin films that provides a fundamental engineering basis to bridge the gap between their nano- and macroscale properties. Selected polymers are infiltrated into a Mayer rod coated conductive SWNT network to fabricate solar cell transparent conductive electrodes (TCEs), fuel cell membrane electrode assemblies (MEAs), and lithium ion battery electrodes. Our TCEs have an outstanding optoelectronic figure of merit σ dc/ σ ac of 19.4 and roughness of 3.8 nm yet are also mechanically robust enough to withstand delamination, a step toward scratch resistance necessary for flexible electronics. Our MEAs show platinum utilization as high as 1550 mW/mg Pt, demonstrating our technique's ability to integrate ionic conductivity of the polymer with electrical conductivity of the SWNTs at the Pt surface. Our battery anodes, which show reversible capacity of ∼850 mAh/g after 15 cycles, demonstrate the integration of electrode and separator to simplify device architecture and decrease overall weight. Each of these applications demonstrates our technique's ability to maintain the conductivity of SWNT networks and their dispersion within a polymer matrix while concurrently optimizing key complementary properties of the composite. Here, we lay the foundation for the assembly of nanotubes and nanostructured components (rods, wires, particles, etc.) into macroscopic multifunctional materials using a low-cost and scalable solution-based processing technique.

KW - carbon nanotube

KW - composite

KW - doping

KW - fuel cell

KW - lithium ion battery

KW - solar cell

UR - http://www.scopus.com/inward/record.url?scp=84863238817&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863238817&partnerID=8YFLogxK

U2 - 10.1021/nn2041544

DO - 10.1021/nn2041544

M3 - Article

C2 - 22236330

AN - SCOPUS:84863238817

VL - 6

SP - 1347

EP - 1356

JO - ACS Nano

JF - ACS Nano

SN - 1936-0851

IS - 2

ER -