Robust control of permanent magnet stepper motors using only rotor position and velocity

Prashanth Krishnamurthy, Farshad Khorrami

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, a robust adaptive nonlinear dynamic controller is designed to achieve practical stabilization for position tracking error of a voltage-fed permanent-magnet stepper motor. The control design is an output-feedback design that utilizes only rotor position and velocity measurements. Currents are not available for feedback. Adaptations are utilized so that no knowledge of motor parameters is required except for an upper and lower bound on the time constant of the electrical subsystem. Furthermore, these bounds are unnecessary under the assumption of sinusoidal flux distribution. The proposed controller has dynamic order three and is robust to load torques, cogging forces, and other disturbances satisfying certain bounds. The controller also guarantees asymptotic stabilization if the torque disturbances can be neglected and asymptotic set-point regulation in the sinusoidal flux distribution case. These results can also be extended to other classes of motors.

Original languageEnglish (US)
Title of host publicationProceedings of the IEEE Conference on Decision and Control
Pages2637-2642
Number of pages6
Volume3
StatePublished - 2001
Event40th IEEE Conference on Decision and Control (CDC) - Orlando, FL, United States
Duration: Dec 4 2001Dec 7 2001

Other

Other40th IEEE Conference on Decision and Control (CDC)
CountryUnited States
CityOrlando, FL
Period12/4/0112/7/01

Fingerprint

Robust control
Permanent magnets
Rotors
Controllers
Torque
Stabilization
Fluxes
Feedback
Position measurement
Velocity measurement
Loads (forces)
Electric potential

ASJC Scopus subject areas

  • Chemical Health and Safety
  • Control and Systems Engineering
  • Safety, Risk, Reliability and Quality

Cite this

Krishnamurthy, P., & Khorrami, F. (2001). Robust control of permanent magnet stepper motors using only rotor position and velocity. In Proceedings of the IEEE Conference on Decision and Control (Vol. 3, pp. 2637-2642)

Robust control of permanent magnet stepper motors using only rotor position and velocity. / Krishnamurthy, Prashanth; Khorrami, Farshad.

Proceedings of the IEEE Conference on Decision and Control. Vol. 3 2001. p. 2637-2642.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Krishnamurthy, P & Khorrami, F 2001, Robust control of permanent magnet stepper motors using only rotor position and velocity. in Proceedings of the IEEE Conference on Decision and Control. vol. 3, pp. 2637-2642, 40th IEEE Conference on Decision and Control (CDC), Orlando, FL, United States, 12/4/01.
Krishnamurthy P, Khorrami F. Robust control of permanent magnet stepper motors using only rotor position and velocity. In Proceedings of the IEEE Conference on Decision and Control. Vol. 3. 2001. p. 2637-2642
Krishnamurthy, Prashanth ; Khorrami, Farshad. / Robust control of permanent magnet stepper motors using only rotor position and velocity. Proceedings of the IEEE Conference on Decision and Control. Vol. 3 2001. pp. 2637-2642
@inproceedings{3b5dc241006d445c9c4aec4e2b3811c8,
title = "Robust control of permanent magnet stepper motors using only rotor position and velocity",
abstract = "In this paper, a robust adaptive nonlinear dynamic controller is designed to achieve practical stabilization for position tracking error of a voltage-fed permanent-magnet stepper motor. The control design is an output-feedback design that utilizes only rotor position and velocity measurements. Currents are not available for feedback. Adaptations are utilized so that no knowledge of motor parameters is required except for an upper and lower bound on the time constant of the electrical subsystem. Furthermore, these bounds are unnecessary under the assumption of sinusoidal flux distribution. The proposed controller has dynamic order three and is robust to load torques, cogging forces, and other disturbances satisfying certain bounds. The controller also guarantees asymptotic stabilization if the torque disturbances can be neglected and asymptotic set-point regulation in the sinusoidal flux distribution case. These results can also be extended to other classes of motors.",
author = "Prashanth Krishnamurthy and Farshad Khorrami",
year = "2001",
language = "English (US)",
volume = "3",
pages = "2637--2642",
booktitle = "Proceedings of the IEEE Conference on Decision and Control",

}

TY - GEN

T1 - Robust control of permanent magnet stepper motors using only rotor position and velocity

AU - Krishnamurthy, Prashanth

AU - Khorrami, Farshad

PY - 2001

Y1 - 2001

N2 - In this paper, a robust adaptive nonlinear dynamic controller is designed to achieve practical stabilization for position tracking error of a voltage-fed permanent-magnet stepper motor. The control design is an output-feedback design that utilizes only rotor position and velocity measurements. Currents are not available for feedback. Adaptations are utilized so that no knowledge of motor parameters is required except for an upper and lower bound on the time constant of the electrical subsystem. Furthermore, these bounds are unnecessary under the assumption of sinusoidal flux distribution. The proposed controller has dynamic order three and is robust to load torques, cogging forces, and other disturbances satisfying certain bounds. The controller also guarantees asymptotic stabilization if the torque disturbances can be neglected and asymptotic set-point regulation in the sinusoidal flux distribution case. These results can also be extended to other classes of motors.

AB - In this paper, a robust adaptive nonlinear dynamic controller is designed to achieve practical stabilization for position tracking error of a voltage-fed permanent-magnet stepper motor. The control design is an output-feedback design that utilizes only rotor position and velocity measurements. Currents are not available for feedback. Adaptations are utilized so that no knowledge of motor parameters is required except for an upper and lower bound on the time constant of the electrical subsystem. Furthermore, these bounds are unnecessary under the assumption of sinusoidal flux distribution. The proposed controller has dynamic order three and is robust to load torques, cogging forces, and other disturbances satisfying certain bounds. The controller also guarantees asymptotic stabilization if the torque disturbances can be neglected and asymptotic set-point regulation in the sinusoidal flux distribution case. These results can also be extended to other classes of motors.

UR - http://www.scopus.com/inward/record.url?scp=0035710687&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035710687&partnerID=8YFLogxK

M3 - Conference contribution

VL - 3

SP - 2637

EP - 2642

BT - Proceedings of the IEEE Conference on Decision and Control

ER -