PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II.

Jovan Mijovic, H. T. Wang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Our research encompasses measurements of kinetic, rheological and transport parameters during processing, as well as an investigation of the formation of 'imperfections' including voids and residual stresses. At the end of the production cycle, the physical/mechanical properties and durability of composites are determined. The experimental results are then checked against the theoretical predictions. The ultimate goal of our research is to automate the production cycle and enable one to program the manufacturing sequence in order to produce composites with desired characteristics. In this paper we shall limit our discussion to the results of two aspects of our investigation: the temperature distribution in the laminate and the changes in chemoviscosity during cure.

Original languageEnglish (US)
Title of host publicationAnnual Technical Conference - Society of Plastics Engineers
PublisherSoc of Plastics Engineers
Pages554-556
Number of pages3
StatePublished - 1986

Fingerprint

Graphite epoxy composites
Autoclaves
Composite materials
Processing
Laminates
Residual stresses
Durability
Temperature distribution
Mechanical properties
Defects
Kinetics

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Mijovic, J., & Wang, H. T. (1986). PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II. In Annual Technical Conference - Society of Plastics Engineers (pp. 554-556). Soc of Plastics Engineers.

PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II. / Mijovic, Jovan; Wang, H. T.

Annual Technical Conference - Society of Plastics Engineers. Soc of Plastics Engineers, 1986. p. 554-556.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mijovic, J & Wang, HT 1986, PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II. in Annual Technical Conference - Society of Plastics Engineers. Soc of Plastics Engineers, pp. 554-556.
Mijovic J, Wang HT. PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II. In Annual Technical Conference - Society of Plastics Engineers. Soc of Plastics Engineers. 1986. p. 554-556
Mijovic, Jovan ; Wang, H. T. / PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II. Annual Technical Conference - Society of Plastics Engineers. Soc of Plastics Engineers, 1986. pp. 554-556
@inproceedings{48c3a6f57e54495aacc485734d2c6728,
title = "PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II.",
abstract = "Our research encompasses measurements of kinetic, rheological and transport parameters during processing, as well as an investigation of the formation of 'imperfections' including voids and residual stresses. At the end of the production cycle, the physical/mechanical properties and durability of composites are determined. The experimental results are then checked against the theoretical predictions. The ultimate goal of our research is to automate the production cycle and enable one to program the manufacturing sequence in order to produce composites with desired characteristics. In this paper we shall limit our discussion to the results of two aspects of our investigation: the temperature distribution in the laminate and the changes in chemoviscosity during cure.",
author = "Jovan Mijovic and Wang, {H. T.}",
year = "1986",
language = "English (US)",
pages = "554--556",
booktitle = "Annual Technical Conference - Society of Plastics Engineers",
publisher = "Soc of Plastics Engineers",

}

TY - GEN

T1 - PROCESSING-PROPERTY RELATIONSHIPS IN AUTOCLAVE-CURED GRAPHITE/EPOXY COMPOSITES - PART II.

AU - Mijovic, Jovan

AU - Wang, H. T.

PY - 1986

Y1 - 1986

N2 - Our research encompasses measurements of kinetic, rheological and transport parameters during processing, as well as an investigation of the formation of 'imperfections' including voids and residual stresses. At the end of the production cycle, the physical/mechanical properties and durability of composites are determined. The experimental results are then checked against the theoretical predictions. The ultimate goal of our research is to automate the production cycle and enable one to program the manufacturing sequence in order to produce composites with desired characteristics. In this paper we shall limit our discussion to the results of two aspects of our investigation: the temperature distribution in the laminate and the changes in chemoviscosity during cure.

AB - Our research encompasses measurements of kinetic, rheological and transport parameters during processing, as well as an investigation of the formation of 'imperfections' including voids and residual stresses. At the end of the production cycle, the physical/mechanical properties and durability of composites are determined. The experimental results are then checked against the theoretical predictions. The ultimate goal of our research is to automate the production cycle and enable one to program the manufacturing sequence in order to produce composites with desired characteristics. In this paper we shall limit our discussion to the results of two aspects of our investigation: the temperature distribution in the laminate and the changes in chemoviscosity during cure.

UR - http://www.scopus.com/inward/record.url?scp=0022866498&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022866498&partnerID=8YFLogxK

M3 - Conference contribution

SP - 554

EP - 556

BT - Annual Technical Conference - Society of Plastics Engineers

PB - Soc of Plastics Engineers

ER -