Ordering in blends of diblock copolymers

Nagraj Koneripalli, Rastislav Levicky, Frank S. Bates, Mark W. Matsen, Sushil K. Satija, John Ankner, Helmut Kaiser

Research output: Contribution to journalArticle

Abstract

The morphology of binary blends of poly(styrene)-poly(2-vinylpyridine) (PS-PVP) diblock copolymers of the type (A-B)α + (A-B)β was examined in a thin-film geometry using neutron reflection (NR), transmission electron microscopy (TEM), and self-consistent field (SCF) calculations. Blends of symmetric diblock copolymers (fA,α ≈ fA,β ≈ 0.5) revealed a localization of the lower molecular weight diblock copolymer and stretching of the higher molecular weight diblock copolymer near the AB interface that is qualitatively consistent with the data of a prior study by Mayes and co-workers. Blends of asymmetric diblock copolymers of the type fA,α < 0.5 and fA,β > 0.5 having similar molecular weights (Nα ≈ Nβ) and with ∼50% overall composition of a chemically similar block in the blend, (fA) ≈ 0.5, revealed molecular-level mixing of the two components and the formation of a single-phase morphology. A lamellar morphology was formed even when the individual components exhibit a nonlamellar morphology in the pure melt state. In general, the morphological characteristics are well anticipated by SCF calculations. After accounting for fluctuations at the interface, spatial distributions of the individual components in the blend obtained by SCF calculations were in close agreement with the NR data. For diblock copolymers near the order-disorder transition, a x value higher than the bulk was necessary to fit the experimental data, suggesting an enhancement of ordering in the thin films near the transition due to the presence of the surfaces.

Original languageEnglish (US)
Pages (from-to)3498-3508
Number of pages11
JournalMacromolecules
Volume31
Issue number11
StatePublished - Jun 2 1998

Fingerprint

Block copolymers
Neutron reflection
Molecular weight
Thin films
Styrene
Order disorder transitions
Spatial distribution
Stretching
Transmission electron microscopy
Geometry
Chemical analysis

ASJC Scopus subject areas

  • Materials Chemistry

Cite this

Koneripalli, N., Levicky, R., Bates, F. S., Matsen, M. W., Satija, S. K., Ankner, J., & Kaiser, H. (1998). Ordering in blends of diblock copolymers. Macromolecules, 31(11), 3498-3508.

Ordering in blends of diblock copolymers. / Koneripalli, Nagraj; Levicky, Rastislav; Bates, Frank S.; Matsen, Mark W.; Satija, Sushil K.; Ankner, John; Kaiser, Helmut.

In: Macromolecules, Vol. 31, No. 11, 02.06.1998, p. 3498-3508.

Research output: Contribution to journalArticle

Koneripalli, N, Levicky, R, Bates, FS, Matsen, MW, Satija, SK, Ankner, J & Kaiser, H 1998, 'Ordering in blends of diblock copolymers', Macromolecules, vol. 31, no. 11, pp. 3498-3508.
Koneripalli N, Levicky R, Bates FS, Matsen MW, Satija SK, Ankner J et al. Ordering in blends of diblock copolymers. Macromolecules. 1998 Jun 2;31(11):3498-3508.
Koneripalli, Nagraj ; Levicky, Rastislav ; Bates, Frank S. ; Matsen, Mark W. ; Satija, Sushil K. ; Ankner, John ; Kaiser, Helmut. / Ordering in blends of diblock copolymers. In: Macromolecules. 1998 ; Vol. 31, No. 11. pp. 3498-3508.
@article{203c4eba5bec487ca8b7cb9dea9dbab9,
title = "Ordering in blends of diblock copolymers",
abstract = "The morphology of binary blends of poly(styrene)-poly(2-vinylpyridine) (PS-PVP) diblock copolymers of the type (A-B)α + (A-B)β was examined in a thin-film geometry using neutron reflection (NR), transmission electron microscopy (TEM), and self-consistent field (SCF) calculations. Blends of symmetric diblock copolymers (fA,α ≈ fA,β ≈ 0.5) revealed a localization of the lower molecular weight diblock copolymer and stretching of the higher molecular weight diblock copolymer near the AB interface that is qualitatively consistent with the data of a prior study by Mayes and co-workers. Blends of asymmetric diblock copolymers of the type fA,α < 0.5 and fA,β > 0.5 having similar molecular weights (Nα ≈ Nβ) and with ∼50{\%} overall composition of a chemically similar block in the blend, (fA) ≈ 0.5, revealed molecular-level mixing of the two components and the formation of a single-phase morphology. A lamellar morphology was formed even when the individual components exhibit a nonlamellar morphology in the pure melt state. In general, the morphological characteristics are well anticipated by SCF calculations. After accounting for fluctuations at the interface, spatial distributions of the individual components in the blend obtained by SCF calculations were in close agreement with the NR data. For diblock copolymers near the order-disorder transition, a x value higher than the bulk was necessary to fit the experimental data, suggesting an enhancement of ordering in the thin films near the transition due to the presence of the surfaces.",
author = "Nagraj Koneripalli and Rastislav Levicky and Bates, {Frank S.} and Matsen, {Mark W.} and Satija, {Sushil K.} and John Ankner and Helmut Kaiser",
year = "1998",
month = "6",
day = "2",
language = "English (US)",
volume = "31",
pages = "3498--3508",
journal = "Macromolecules",
issn = "0024-9297",
publisher = "American Chemical Society",
number = "11",

}

TY - JOUR

T1 - Ordering in blends of diblock copolymers

AU - Koneripalli, Nagraj

AU - Levicky, Rastislav

AU - Bates, Frank S.

AU - Matsen, Mark W.

AU - Satija, Sushil K.

AU - Ankner, John

AU - Kaiser, Helmut

PY - 1998/6/2

Y1 - 1998/6/2

N2 - The morphology of binary blends of poly(styrene)-poly(2-vinylpyridine) (PS-PVP) diblock copolymers of the type (A-B)α + (A-B)β was examined in a thin-film geometry using neutron reflection (NR), transmission electron microscopy (TEM), and self-consistent field (SCF) calculations. Blends of symmetric diblock copolymers (fA,α ≈ fA,β ≈ 0.5) revealed a localization of the lower molecular weight diblock copolymer and stretching of the higher molecular weight diblock copolymer near the AB interface that is qualitatively consistent with the data of a prior study by Mayes and co-workers. Blends of asymmetric diblock copolymers of the type fA,α < 0.5 and fA,β > 0.5 having similar molecular weights (Nα ≈ Nβ) and with ∼50% overall composition of a chemically similar block in the blend, (fA) ≈ 0.5, revealed molecular-level mixing of the two components and the formation of a single-phase morphology. A lamellar morphology was formed even when the individual components exhibit a nonlamellar morphology in the pure melt state. In general, the morphological characteristics are well anticipated by SCF calculations. After accounting for fluctuations at the interface, spatial distributions of the individual components in the blend obtained by SCF calculations were in close agreement with the NR data. For diblock copolymers near the order-disorder transition, a x value higher than the bulk was necessary to fit the experimental data, suggesting an enhancement of ordering in the thin films near the transition due to the presence of the surfaces.

AB - The morphology of binary blends of poly(styrene)-poly(2-vinylpyridine) (PS-PVP) diblock copolymers of the type (A-B)α + (A-B)β was examined in a thin-film geometry using neutron reflection (NR), transmission electron microscopy (TEM), and self-consistent field (SCF) calculations. Blends of symmetric diblock copolymers (fA,α ≈ fA,β ≈ 0.5) revealed a localization of the lower molecular weight diblock copolymer and stretching of the higher molecular weight diblock copolymer near the AB interface that is qualitatively consistent with the data of a prior study by Mayes and co-workers. Blends of asymmetric diblock copolymers of the type fA,α < 0.5 and fA,β > 0.5 having similar molecular weights (Nα ≈ Nβ) and with ∼50% overall composition of a chemically similar block in the blend, (fA) ≈ 0.5, revealed molecular-level mixing of the two components and the formation of a single-phase morphology. A lamellar morphology was formed even when the individual components exhibit a nonlamellar morphology in the pure melt state. In general, the morphological characteristics are well anticipated by SCF calculations. After accounting for fluctuations at the interface, spatial distributions of the individual components in the blend obtained by SCF calculations were in close agreement with the NR data. For diblock copolymers near the order-disorder transition, a x value higher than the bulk was necessary to fit the experimental data, suggesting an enhancement of ordering in the thin films near the transition due to the presence of the surfaces.

UR - http://www.scopus.com/inward/record.url?scp=0032474384&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032474384&partnerID=8YFLogxK

M3 - Article

VL - 31

SP - 3498

EP - 3508

JO - Macromolecules

JF - Macromolecules

SN - 0024-9297

IS - 11

ER -