Microstructure evolution and crystal growth in Cu2ZnSnS 4 thin films formed by annealing colloidal nanocrystal coatings

Boris D. Chernomordik, Amélie E. Béland, Donna D. Deng, Lorraine F. Francis, Eray Aydil

Research output: Contribution to journalArticle

Abstract

A potentially low-cost approach for making copper zinc tin sulfide (CZTS) solar cells relies on annealing colloidal nanocrystal films cast on suitable substrates in a sulfur-containing environment to form thin films with micrometer-sized grains. The film microstructure and grain size affects the solar cell performance. We conducted a systematic study of the factors controlling crystal growth and microstructure development during annealing of films cast from colloidal dispersions of CZTS nanocrystals. The film microstructure is controlled by concurrent normal and abnormal grain growth. At 600 to 800 °C and low sulfur pressures (50 Torr), abnormal CZTS grains up to 10 μm in size grow on the surface of the CZTS nanocrystal film via transport of material from the nanocrystals to the abnormal grains. Meanwhile, the nanocrystals coarsen, sinter, and undergo normal grain growth. The driving force for abnormal grain growth is the reduction in total energy associated with the high surface area nanocrystals. The eventual coarsening of the CZTS nanocrystals reduces the driving force for abnormal crystal growth. Increasing the sulfur pressure by an order of magnitude to 500 Torr accelerates both normal and abnormal crystal growth though sufficient acceleration of the former eventually reduces the latter by reducing the driving force for abnormal grain growth. For example, at high temperatures (700 °C) and sulfur pressures (500 Torr) normal grains quickly grow to ∼500 nm which significantly reduces abnormal grain growth. The use of soda lime glass as the substrate, instead of quartz, accelerates normal grain growth. Normal grains grow to ∼500 nm at lower temperatures and sulfur pressures (i.e., 600 °C and 50 Torr) than those required to grow the same size grains on quartz (700 °C and 500 Torr).

Original languageEnglish (US)
Pages (from-to)3191-3201
Number of pages11
JournalChemistry of Materials
Volume26
Issue number10
DOIs
StatePublished - May 27 2014

Fingerprint

Crystallization
Crystal growth
Nanocrystals
Grain growth
Annealing
Sulfur
Tin
Thin films
Coatings
Zinc
Copper
Microstructure
Quartz
Solar cells
Crystal microstructure
Coarsening
Substrates
Dispersions
Lime
Sulfides

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Chemistry

Cite this

Microstructure evolution and crystal growth in Cu2ZnSnS 4 thin films formed by annealing colloidal nanocrystal coatings. / Chernomordik, Boris D.; Béland, Amélie E.; Deng, Donna D.; Francis, Lorraine F.; Aydil, Eray.

In: Chemistry of Materials, Vol. 26, No. 10, 27.05.2014, p. 3191-3201.

Research output: Contribution to journalArticle

Chernomordik, Boris D. ; Béland, Amélie E. ; Deng, Donna D. ; Francis, Lorraine F. ; Aydil, Eray. / Microstructure evolution and crystal growth in Cu2ZnSnS 4 thin films formed by annealing colloidal nanocrystal coatings. In: Chemistry of Materials. 2014 ; Vol. 26, No. 10. pp. 3191-3201.
@article{4dbbffb891624dd2b25b637004a97e4b,
title = "Microstructure evolution and crystal growth in Cu2ZnSnS 4 thin films formed by annealing colloidal nanocrystal coatings",
abstract = "A potentially low-cost approach for making copper zinc tin sulfide (CZTS) solar cells relies on annealing colloidal nanocrystal films cast on suitable substrates in a sulfur-containing environment to form thin films with micrometer-sized grains. The film microstructure and grain size affects the solar cell performance. We conducted a systematic study of the factors controlling crystal growth and microstructure development during annealing of films cast from colloidal dispersions of CZTS nanocrystals. The film microstructure is controlled by concurrent normal and abnormal grain growth. At 600 to 800 °C and low sulfur pressures (50 Torr), abnormal CZTS grains up to 10 μm in size grow on the surface of the CZTS nanocrystal film via transport of material from the nanocrystals to the abnormal grains. Meanwhile, the nanocrystals coarsen, sinter, and undergo normal grain growth. The driving force for abnormal grain growth is the reduction in total energy associated with the high surface area nanocrystals. The eventual coarsening of the CZTS nanocrystals reduces the driving force for abnormal crystal growth. Increasing the sulfur pressure by an order of magnitude to 500 Torr accelerates both normal and abnormal crystal growth though sufficient acceleration of the former eventually reduces the latter by reducing the driving force for abnormal grain growth. For example, at high temperatures (700 °C) and sulfur pressures (500 Torr) normal grains quickly grow to ∼500 nm which significantly reduces abnormal grain growth. The use of soda lime glass as the substrate, instead of quartz, accelerates normal grain growth. Normal grains grow to ∼500 nm at lower temperatures and sulfur pressures (i.e., 600 °C and 50 Torr) than those required to grow the same size grains on quartz (700 °C and 500 Torr).",
author = "Chernomordik, {Boris D.} and B{\'e}land, {Am{\'e}lie E.} and Deng, {Donna D.} and Francis, {Lorraine F.} and Eray Aydil",
year = "2014",
month = "5",
day = "27",
doi = "10.1021/cm500791a",
language = "English (US)",
volume = "26",
pages = "3191--3201",
journal = "Chemistry of Materials",
issn = "0897-4756",
publisher = "American Chemical Society",
number = "10",

}

TY - JOUR

T1 - Microstructure evolution and crystal growth in Cu2ZnSnS 4 thin films formed by annealing colloidal nanocrystal coatings

AU - Chernomordik, Boris D.

AU - Béland, Amélie E.

AU - Deng, Donna D.

AU - Francis, Lorraine F.

AU - Aydil, Eray

PY - 2014/5/27

Y1 - 2014/5/27

N2 - A potentially low-cost approach for making copper zinc tin sulfide (CZTS) solar cells relies on annealing colloidal nanocrystal films cast on suitable substrates in a sulfur-containing environment to form thin films with micrometer-sized grains. The film microstructure and grain size affects the solar cell performance. We conducted a systematic study of the factors controlling crystal growth and microstructure development during annealing of films cast from colloidal dispersions of CZTS nanocrystals. The film microstructure is controlled by concurrent normal and abnormal grain growth. At 600 to 800 °C and low sulfur pressures (50 Torr), abnormal CZTS grains up to 10 μm in size grow on the surface of the CZTS nanocrystal film via transport of material from the nanocrystals to the abnormal grains. Meanwhile, the nanocrystals coarsen, sinter, and undergo normal grain growth. The driving force for abnormal grain growth is the reduction in total energy associated with the high surface area nanocrystals. The eventual coarsening of the CZTS nanocrystals reduces the driving force for abnormal crystal growth. Increasing the sulfur pressure by an order of magnitude to 500 Torr accelerates both normal and abnormal crystal growth though sufficient acceleration of the former eventually reduces the latter by reducing the driving force for abnormal grain growth. For example, at high temperatures (700 °C) and sulfur pressures (500 Torr) normal grains quickly grow to ∼500 nm which significantly reduces abnormal grain growth. The use of soda lime glass as the substrate, instead of quartz, accelerates normal grain growth. Normal grains grow to ∼500 nm at lower temperatures and sulfur pressures (i.e., 600 °C and 50 Torr) than those required to grow the same size grains on quartz (700 °C and 500 Torr).

AB - A potentially low-cost approach for making copper zinc tin sulfide (CZTS) solar cells relies on annealing colloidal nanocrystal films cast on suitable substrates in a sulfur-containing environment to form thin films with micrometer-sized grains. The film microstructure and grain size affects the solar cell performance. We conducted a systematic study of the factors controlling crystal growth and microstructure development during annealing of films cast from colloidal dispersions of CZTS nanocrystals. The film microstructure is controlled by concurrent normal and abnormal grain growth. At 600 to 800 °C and low sulfur pressures (50 Torr), abnormal CZTS grains up to 10 μm in size grow on the surface of the CZTS nanocrystal film via transport of material from the nanocrystals to the abnormal grains. Meanwhile, the nanocrystals coarsen, sinter, and undergo normal grain growth. The driving force for abnormal grain growth is the reduction in total energy associated with the high surface area nanocrystals. The eventual coarsening of the CZTS nanocrystals reduces the driving force for abnormal crystal growth. Increasing the sulfur pressure by an order of magnitude to 500 Torr accelerates both normal and abnormal crystal growth though sufficient acceleration of the former eventually reduces the latter by reducing the driving force for abnormal grain growth. For example, at high temperatures (700 °C) and sulfur pressures (500 Torr) normal grains quickly grow to ∼500 nm which significantly reduces abnormal grain growth. The use of soda lime glass as the substrate, instead of quartz, accelerates normal grain growth. Normal grains grow to ∼500 nm at lower temperatures and sulfur pressures (i.e., 600 °C and 50 Torr) than those required to grow the same size grains on quartz (700 °C and 500 Torr).

UR - http://www.scopus.com/inward/record.url?scp=84901396167&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84901396167&partnerID=8YFLogxK

U2 - 10.1021/cm500791a

DO - 10.1021/cm500791a

M3 - Article

VL - 26

SP - 3191

EP - 3201

JO - Chemistry of Materials

JF - Chemistry of Materials

SN - 0897-4756

IS - 10

ER -