Mechanical Response of 3D Printed Bending-Dominated Ligament-Based Triply Periodic Cellular Polymeric Solids

Aliaa M. Abou-Ali, Oraib Al-Ketan, Reza Rowshan, Rashid Abu Al-Rub

Research output: Contribution to journalArticle

Abstract

Lightweight materials with complex structures such as cellular solids (or foams) have proven to possess desirable properties, specifically in terms of its stiffness, strength, and thermal conductivity, among other mechanical and thermal performance aspects while the density is reduced. The fabrication of such attractive yet complex materials has become possible due to the witnessed advancements in fabrication techniques. However, a major challenge in adapting cellular solids in mechanical design is choosing the appropriate lattice design. Therefore, this paper focuses on studying the compressive mechanical behavior of four different types of cellular solids with topologies based on the mathematically known triply periodic minimal surfaces (TPMS); namely, Diamond (D), I-WP (IWP), Gyroid (G), and Fisher-Koch C(Y) (CY). These cellular materials are 3D printed using the powder bed fusion selective laser sintering technique out of Nylon thermoplastic polymer at various relative densities. The effects of the number of unit cells, type of the ligament-based TPMS architecture, and relative density on the stiffness, yield strength, ultimate strength, and toughness are thoroughly investigated. The results indicated that the effect of the architecture is stronger when the relative density is decreased. Also, the analyses showed that all the tested architectures were bending dominated implying that it could be best applied in shock absorbing and vibration mitigation applications.

Original languageEnglish (US)
Pages (from-to)2316-2326
Number of pages11
JournalJournal of Materials Engineering and Performance
Volume28
Issue number4
DOIs
StatePublished - Apr 1 2019

Fingerprint

Ligaments
Stiffness
Fabrication
Diamond
Nylons
Powders
Thermoplastics
Toughness
Yield stress
Foams
Diamonds
Thermal conductivity
Polymers
Fusion reactions
Sintering
Topology
Lasers

Keywords

  • additive manufacturing
  • advanced characterization
  • static mechanical

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Mechanical Response of 3D Printed Bending-Dominated Ligament-Based Triply Periodic Cellular Polymeric Solids. / Abou-Ali, Aliaa M.; Al-Ketan, Oraib; Rowshan, Reza; Abu Al-Rub, Rashid.

In: Journal of Materials Engineering and Performance, Vol. 28, No. 4, 01.04.2019, p. 2316-2326.

Research output: Contribution to journalArticle

@article{1a63c7029ea6497ba0a9250b287f58a0,
title = "Mechanical Response of 3D Printed Bending-Dominated Ligament-Based Triply Periodic Cellular Polymeric Solids",
abstract = "Lightweight materials with complex structures such as cellular solids (or foams) have proven to possess desirable properties, specifically in terms of its stiffness, strength, and thermal conductivity, among other mechanical and thermal performance aspects while the density is reduced. The fabrication of such attractive yet complex materials has become possible due to the witnessed advancements in fabrication techniques. However, a major challenge in adapting cellular solids in mechanical design is choosing the appropriate lattice design. Therefore, this paper focuses on studying the compressive mechanical behavior of four different types of cellular solids with topologies based on the mathematically known triply periodic minimal surfaces (TPMS); namely, Diamond (D), I-WP (IWP), Gyroid (G), and Fisher-Koch C(Y) (CY). These cellular materials are 3D printed using the powder bed fusion selective laser sintering technique out of Nylon thermoplastic polymer at various relative densities. The effects of the number of unit cells, type of the ligament-based TPMS architecture, and relative density on the stiffness, yield strength, ultimate strength, and toughness are thoroughly investigated. The results indicated that the effect of the architecture is stronger when the relative density is decreased. Also, the analyses showed that all the tested architectures were bending dominated implying that it could be best applied in shock absorbing and vibration mitigation applications.",
keywords = "additive manufacturing, advanced characterization, static mechanical",
author = "Abou-Ali, {Aliaa M.} and Oraib Al-Ketan and Reza Rowshan and {Abu Al-Rub}, Rashid",
year = "2019",
month = "4",
day = "1",
doi = "10.1007/s11665-019-03982-8",
language = "English (US)",
volume = "28",
pages = "2316--2326",
journal = "Journal of Materials Engineering and Performance",
issn = "1059-9495",
publisher = "Springer New York",
number = "4",

}

TY - JOUR

T1 - Mechanical Response of 3D Printed Bending-Dominated Ligament-Based Triply Periodic Cellular Polymeric Solids

AU - Abou-Ali, Aliaa M.

AU - Al-Ketan, Oraib

AU - Rowshan, Reza

AU - Abu Al-Rub, Rashid

PY - 2019/4/1

Y1 - 2019/4/1

N2 - Lightweight materials with complex structures such as cellular solids (or foams) have proven to possess desirable properties, specifically in terms of its stiffness, strength, and thermal conductivity, among other mechanical and thermal performance aspects while the density is reduced. The fabrication of such attractive yet complex materials has become possible due to the witnessed advancements in fabrication techniques. However, a major challenge in adapting cellular solids in mechanical design is choosing the appropriate lattice design. Therefore, this paper focuses on studying the compressive mechanical behavior of four different types of cellular solids with topologies based on the mathematically known triply periodic minimal surfaces (TPMS); namely, Diamond (D), I-WP (IWP), Gyroid (G), and Fisher-Koch C(Y) (CY). These cellular materials are 3D printed using the powder bed fusion selective laser sintering technique out of Nylon thermoplastic polymer at various relative densities. The effects of the number of unit cells, type of the ligament-based TPMS architecture, and relative density on the stiffness, yield strength, ultimate strength, and toughness are thoroughly investigated. The results indicated that the effect of the architecture is stronger when the relative density is decreased. Also, the analyses showed that all the tested architectures were bending dominated implying that it could be best applied in shock absorbing and vibration mitigation applications.

AB - Lightweight materials with complex structures such as cellular solids (or foams) have proven to possess desirable properties, specifically in terms of its stiffness, strength, and thermal conductivity, among other mechanical and thermal performance aspects while the density is reduced. The fabrication of such attractive yet complex materials has become possible due to the witnessed advancements in fabrication techniques. However, a major challenge in adapting cellular solids in mechanical design is choosing the appropriate lattice design. Therefore, this paper focuses on studying the compressive mechanical behavior of four different types of cellular solids with topologies based on the mathematically known triply periodic minimal surfaces (TPMS); namely, Diamond (D), I-WP (IWP), Gyroid (G), and Fisher-Koch C(Y) (CY). These cellular materials are 3D printed using the powder bed fusion selective laser sintering technique out of Nylon thermoplastic polymer at various relative densities. The effects of the number of unit cells, type of the ligament-based TPMS architecture, and relative density on the stiffness, yield strength, ultimate strength, and toughness are thoroughly investigated. The results indicated that the effect of the architecture is stronger when the relative density is decreased. Also, the analyses showed that all the tested architectures were bending dominated implying that it could be best applied in shock absorbing and vibration mitigation applications.

KW - additive manufacturing

KW - advanced characterization

KW - static mechanical

UR - http://www.scopus.com/inward/record.url?scp=85070854615&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85070854615&partnerID=8YFLogxK

U2 - 10.1007/s11665-019-03982-8

DO - 10.1007/s11665-019-03982-8

M3 - Article

VL - 28

SP - 2316

EP - 2326

JO - Journal of Materials Engineering and Performance

JF - Journal of Materials Engineering and Performance

SN - 1059-9495

IS - 4

ER -