Measurements and simulation of radio frequency impulsive noise in hospitals and clinics

T. Keith Blankenship, Donna M. Krizman, Theodore S. Rappaport

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Electrical and mechanical equipment can be a major source of interference to indoor wireless systems. A receiver system was developed to measure the time-varying nature of such `impulsive noise' in the 450 MHz band, and extensive measurements were made in hospitals and clinics across the United States. Empirical distributions were extracted for the amplitude, inter-arrival time, and duration of the observed noise pulses. The software propagation simulation tool SIRCIM Plus was developed to include the simulation of impulsive noise in indoor environments, based on the measurements reported here.

Original languageEnglish (US)
Title of host publicationIEEE Vehicular Technology Conference
Editors Anon
PublisherIEEE
Pages1942-1946
Number of pages5
Volume3
StatePublished - 1997
EventProceedings of the 1997 47th IEEE Vehicular Technology Conference. Part 1 (of 3) - Phoenix, AZ, USA
Duration: May 4 1997May 7 1997

Other

OtherProceedings of the 1997 47th IEEE Vehicular Technology Conference. Part 1 (of 3)
CityPhoenix, AZ, USA
Period5/4/975/7/97

Fingerprint

Impulse noise

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Blankenship, T. K., Krizman, D. M., & Rappaport, T. S. (1997). Measurements and simulation of radio frequency impulsive noise in hospitals and clinics. In Anon (Ed.), IEEE Vehicular Technology Conference (Vol. 3, pp. 1942-1946). IEEE.

Measurements and simulation of radio frequency impulsive noise in hospitals and clinics. / Blankenship, T. Keith; Krizman, Donna M.; Rappaport, Theodore S.

IEEE Vehicular Technology Conference. ed. / Anon. Vol. 3 IEEE, 1997. p. 1942-1946.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blankenship, TK, Krizman, DM & Rappaport, TS 1997, Measurements and simulation of radio frequency impulsive noise in hospitals and clinics. in Anon (ed.), IEEE Vehicular Technology Conference. vol. 3, IEEE, pp. 1942-1946, Proceedings of the 1997 47th IEEE Vehicular Technology Conference. Part 1 (of 3), Phoenix, AZ, USA, 5/4/97.
Blankenship TK, Krizman DM, Rappaport TS. Measurements and simulation of radio frequency impulsive noise in hospitals and clinics. In Anon, editor, IEEE Vehicular Technology Conference. Vol. 3. IEEE. 1997. p. 1942-1946
Blankenship, T. Keith ; Krizman, Donna M. ; Rappaport, Theodore S. / Measurements and simulation of radio frequency impulsive noise in hospitals and clinics. IEEE Vehicular Technology Conference. editor / Anon. Vol. 3 IEEE, 1997. pp. 1942-1946
@inproceedings{66b94296e1e24c84819b0d291e22463a,
title = "Measurements and simulation of radio frequency impulsive noise in hospitals and clinics",
abstract = "Electrical and mechanical equipment can be a major source of interference to indoor wireless systems. A receiver system was developed to measure the time-varying nature of such `impulsive noise' in the 450 MHz band, and extensive measurements were made in hospitals and clinics across the United States. Empirical distributions were extracted for the amplitude, inter-arrival time, and duration of the observed noise pulses. The software propagation simulation tool SIRCIM Plus was developed to include the simulation of impulsive noise in indoor environments, based on the measurements reported here.",
author = "Blankenship, {T. Keith} and Krizman, {Donna M.} and Rappaport, {Theodore S.}",
year = "1997",
language = "English (US)",
volume = "3",
pages = "1942--1946",
editor = "Anon",
booktitle = "IEEE Vehicular Technology Conference",
publisher = "IEEE",

}

TY - GEN

T1 - Measurements and simulation of radio frequency impulsive noise in hospitals and clinics

AU - Blankenship, T. Keith

AU - Krizman, Donna M.

AU - Rappaport, Theodore S.

PY - 1997

Y1 - 1997

N2 - Electrical and mechanical equipment can be a major source of interference to indoor wireless systems. A receiver system was developed to measure the time-varying nature of such `impulsive noise' in the 450 MHz band, and extensive measurements were made in hospitals and clinics across the United States. Empirical distributions were extracted for the amplitude, inter-arrival time, and duration of the observed noise pulses. The software propagation simulation tool SIRCIM Plus was developed to include the simulation of impulsive noise in indoor environments, based on the measurements reported here.

AB - Electrical and mechanical equipment can be a major source of interference to indoor wireless systems. A receiver system was developed to measure the time-varying nature of such `impulsive noise' in the 450 MHz band, and extensive measurements were made in hospitals and clinics across the United States. Empirical distributions were extracted for the amplitude, inter-arrival time, and duration of the observed noise pulses. The software propagation simulation tool SIRCIM Plus was developed to include the simulation of impulsive noise in indoor environments, based on the measurements reported here.

UR - http://www.scopus.com/inward/record.url?scp=0030646526&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030646526&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0030646526

VL - 3

SP - 1942

EP - 1946

BT - IEEE Vehicular Technology Conference

A2 - Anon, null

PB - IEEE

ER -