IMPROVEMENTS IN THE PROCESS OF PRODUCING SAPPHIRE CRYSTALS BY THE STEPANOV METHOD AND THE RESULTS OF THEIR COMMERCIAL INTRODUCTION.

L. M. Zatulovskii, D. Ya Kravetskii, L. P. Egorov, B. B. Pel'ts, P. M. Chaikin, I. E. Berezina, S. V. Tsivinskii

    Research output: Contribution to journalArticle

    Abstract

    The stability and reproducibility of the process, the increase in stability of the equipment, and the broadening of the range of parts that may be grown have been investigated. Shaped crystals were obtained by means of a shaper with a geometry that may be changed in the course of the process and by relative shift in the elements of the thermal zone, corresponding to change in the temperature conditions and the growth rate.

    Original languageEnglish (US)
    Pages (from-to)157-158
    Number of pages2
    JournalBulletin of the Academy of Sciences of the U.S.S.R. Physical series
    Volume47
    Issue number2
    StatePublished - 1982

    Fingerprint

    Sapphire
    sapphire
    Crystals
    shapers
    crystals
    Geometry
    shift
    geometry
    Temperature
    temperature
    Hot Temperature

    ASJC Scopus subject areas

    • Engineering(all)

    Cite this

    Zatulovskii, L. M., Kravetskii, D. Y., Egorov, L. P., Pel'ts, B. B., Chaikin, P. M., Berezina, I. E., & Tsivinskii, S. V. (1982). IMPROVEMENTS IN THE PROCESS OF PRODUCING SAPPHIRE CRYSTALS BY THE STEPANOV METHOD AND THE RESULTS OF THEIR COMMERCIAL INTRODUCTION. Bulletin of the Academy of Sciences of the U.S.S.R. Physical series, 47(2), 157-158.

    IMPROVEMENTS IN THE PROCESS OF PRODUCING SAPPHIRE CRYSTALS BY THE STEPANOV METHOD AND THE RESULTS OF THEIR COMMERCIAL INTRODUCTION. / Zatulovskii, L. M.; Kravetskii, D. Ya; Egorov, L. P.; Pel'ts, B. B.; Chaikin, P. M.; Berezina, I. E.; Tsivinskii, S. V.

    In: Bulletin of the Academy of Sciences of the U.S.S.R. Physical series, Vol. 47, No. 2, 1982, p. 157-158.

    Research output: Contribution to journalArticle

    Zatulovskii, LM, Kravetskii, DY, Egorov, LP, Pel'ts, BB, Chaikin, PM, Berezina, IE & Tsivinskii, SV 1982, 'IMPROVEMENTS IN THE PROCESS OF PRODUCING SAPPHIRE CRYSTALS BY THE STEPANOV METHOD AND THE RESULTS OF THEIR COMMERCIAL INTRODUCTION.', Bulletin of the Academy of Sciences of the U.S.S.R. Physical series, vol. 47, no. 2, pp. 157-158.
    Zatulovskii, L. M. ; Kravetskii, D. Ya ; Egorov, L. P. ; Pel'ts, B. B. ; Chaikin, P. M. ; Berezina, I. E. ; Tsivinskii, S. V. / IMPROVEMENTS IN THE PROCESS OF PRODUCING SAPPHIRE CRYSTALS BY THE STEPANOV METHOD AND THE RESULTS OF THEIR COMMERCIAL INTRODUCTION. In: Bulletin of the Academy of Sciences of the U.S.S.R. Physical series. 1982 ; Vol. 47, No. 2. pp. 157-158.
    @article{c37c2ecd959343e0b4b506ddeba1d023,
    title = "IMPROVEMENTS IN THE PROCESS OF PRODUCING SAPPHIRE CRYSTALS BY THE STEPANOV METHOD AND THE RESULTS OF THEIR COMMERCIAL INTRODUCTION.",
    abstract = "The stability and reproducibility of the process, the increase in stability of the equipment, and the broadening of the range of parts that may be grown have been investigated. Shaped crystals were obtained by means of a shaper with a geometry that may be changed in the course of the process and by relative shift in the elements of the thermal zone, corresponding to change in the temperature conditions and the growth rate.",
    author = "Zatulovskii, {L. M.} and Kravetskii, {D. Ya} and Egorov, {L. P.} and Pel'ts, {B. B.} and Chaikin, {P. M.} and Berezina, {I. E.} and Tsivinskii, {S. V.}",
    year = "1982",
    language = "English (US)",
    volume = "47",
    pages = "157--158",
    journal = "Bulletin of the Russian Academy of Sciences: Physics",
    issn = "1062-8738",
    publisher = "Allerton Press Inc.",
    number = "2",

    }

    TY - JOUR

    T1 - IMPROVEMENTS IN THE PROCESS OF PRODUCING SAPPHIRE CRYSTALS BY THE STEPANOV METHOD AND THE RESULTS OF THEIR COMMERCIAL INTRODUCTION.

    AU - Zatulovskii, L. M.

    AU - Kravetskii, D. Ya

    AU - Egorov, L. P.

    AU - Pel'ts, B. B.

    AU - Chaikin, P. M.

    AU - Berezina, I. E.

    AU - Tsivinskii, S. V.

    PY - 1982

    Y1 - 1982

    N2 - The stability and reproducibility of the process, the increase in stability of the equipment, and the broadening of the range of parts that may be grown have been investigated. Shaped crystals were obtained by means of a shaper with a geometry that may be changed in the course of the process and by relative shift in the elements of the thermal zone, corresponding to change in the temperature conditions and the growth rate.

    AB - The stability and reproducibility of the process, the increase in stability of the equipment, and the broadening of the range of parts that may be grown have been investigated. Shaped crystals were obtained by means of a shaper with a geometry that may be changed in the course of the process and by relative shift in the elements of the thermal zone, corresponding to change in the temperature conditions and the growth rate.

    UR - http://www.scopus.com/inward/record.url?scp=0020220253&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0020220253&partnerID=8YFLogxK

    M3 - Article

    VL - 47

    SP - 157

    EP - 158

    JO - Bulletin of the Russian Academy of Sciences: Physics

    JF - Bulletin of the Russian Academy of Sciences: Physics

    SN - 1062-8738

    IS - 2

    ER -