Immobilized polymer layers on spherical nanoparticles

Shane E. Harton, Sanat K. Kumar, Hoichang Yang, Tadanori Koga, Kyle Hicks, Hyungki Lee, Jovan Mijovic, Ming Liu, Richard S. Vallery, David W. Gidley

Research output: Contribution to journalArticle

Abstract

Polymer properties, such as their mechanical strength, barrier properties, and dielectric response, can be dramatically improved by the addition of nanoparticles. This improvement is thought to be because the surface area per unit mass of particles increases with decreasing particle size, R, as 1/R. This favorable effect has to be reconciled with the expectation that at small enough R the nanoparticles must behave akin to a solvent and cause a deterioration of properties. How does this transition in behavior from large solutes to the solvent limit occur? We conjecture that for small enough particles the layer of polymer affected by the particles ("bound" polymer layer) must be much smaller than that for large particles: the favorable effect of increasing particle surface area can thus be overcome and lead to the small solvent limit with unfavorable mechanical properties, for example. To substantiate this picture requires that we measure and compare the "bound polymer layer" formed on nanoparticles with those near large particles with equivalent chemistry. We have implemented a novel strategy to obtain uniform nanoparticle dispersion in polymers, a problem for many previous works. Then, by combining theory and a suite of experimental techniques, including differential scanning calorimetry and positron annihilation lifetime spectroscopy, we show that the immobilized poly(2-vinylpyridine) layer near 15 nm diameter silica particles (∼1 nm) is considerably thinner than that at flat silica surfaces (∼4 to 5 nm), which is the limit of an infinitely large particle. We have also determined that the changes in the polymer's glass-transition temperature due to the presence of this strongly interacting surface are very small in both well-dispersed nanocomposites and thin films ( < 100 nm). Similarly, the polymer's fragility, as determined by dielectric spectroscopy, is also found to be little affected in the nanocomposites relative to the pure polymer. While a systematic study of the dependence of the bound polymer layer thickness on particle size remains an outstanding challenge, this first study provides conclusive evidence for the hypothesis that the bound polymer layer can be significantly smaller around nanoparticles than at chemically similar flat surfaces.

Original languageEnglish (US)
Pages (from-to)3415-3421
Number of pages7
JournalMacromolecules
Volume43
Issue number7
DOIs
StatePublished - Apr 13 2010

Fingerprint

Polymers
Nanoparticles
Silicon Dioxide
Particle size
Silica
Dielectric spectroscopy
Nanocomposite films
Positron annihilation
Strength of materials
Deterioration
Differential scanning calorimetry
Nanocomposites
Spectroscopy
Thin films
Mechanical properties

ASJC Scopus subject areas

  • Organic Chemistry
  • Materials Chemistry
  • Polymers and Plastics
  • Inorganic Chemistry

Cite this

Harton, S. E., Kumar, S. K., Yang, H., Koga, T., Hicks, K., Lee, H., ... Gidley, D. W. (2010). Immobilized polymer layers on spherical nanoparticles. Macromolecules, 43(7), 3415-3421. https://doi.org/10.1021/ma902484d

Immobilized polymer layers on spherical nanoparticles. / Harton, Shane E.; Kumar, Sanat K.; Yang, Hoichang; Koga, Tadanori; Hicks, Kyle; Lee, Hyungki; Mijovic, Jovan; Liu, Ming; Vallery, Richard S.; Gidley, David W.

In: Macromolecules, Vol. 43, No. 7, 13.04.2010, p. 3415-3421.

Research output: Contribution to journalArticle

Harton, SE, Kumar, SK, Yang, H, Koga, T, Hicks, K, Lee, H, Mijovic, J, Liu, M, Vallery, RS & Gidley, DW 2010, 'Immobilized polymer layers on spherical nanoparticles', Macromolecules, vol. 43, no. 7, pp. 3415-3421. https://doi.org/10.1021/ma902484d
Harton SE, Kumar SK, Yang H, Koga T, Hicks K, Lee H et al. Immobilized polymer layers on spherical nanoparticles. Macromolecules. 2010 Apr 13;43(7):3415-3421. https://doi.org/10.1021/ma902484d
Harton, Shane E. ; Kumar, Sanat K. ; Yang, Hoichang ; Koga, Tadanori ; Hicks, Kyle ; Lee, Hyungki ; Mijovic, Jovan ; Liu, Ming ; Vallery, Richard S. ; Gidley, David W. / Immobilized polymer layers on spherical nanoparticles. In: Macromolecules. 2010 ; Vol. 43, No. 7. pp. 3415-3421.
@article{08ac7e886c584f5a98d53f2e756e0eac,
title = "Immobilized polymer layers on spherical nanoparticles",
abstract = "Polymer properties, such as their mechanical strength, barrier properties, and dielectric response, can be dramatically improved by the addition of nanoparticles. This improvement is thought to be because the surface area per unit mass of particles increases with decreasing particle size, R, as 1/R. This favorable effect has to be reconciled with the expectation that at small enough R the nanoparticles must behave akin to a solvent and cause a deterioration of properties. How does this transition in behavior from large solutes to the solvent limit occur? We conjecture that for small enough particles the layer of polymer affected by the particles ({"}bound{"} polymer layer) must be much smaller than that for large particles: the favorable effect of increasing particle surface area can thus be overcome and lead to the small solvent limit with unfavorable mechanical properties, for example. To substantiate this picture requires that we measure and compare the {"}bound polymer layer{"} formed on nanoparticles with those near large particles with equivalent chemistry. We have implemented a novel strategy to obtain uniform nanoparticle dispersion in polymers, a problem for many previous works. Then, by combining theory and a suite of experimental techniques, including differential scanning calorimetry and positron annihilation lifetime spectroscopy, we show that the immobilized poly(2-vinylpyridine) layer near 15 nm diameter silica particles (∼1 nm) is considerably thinner than that at flat silica surfaces (∼4 to 5 nm), which is the limit of an infinitely large particle. We have also determined that the changes in the polymer's glass-transition temperature due to the presence of this strongly interacting surface are very small in both well-dispersed nanocomposites and thin films ( < 100 nm). Similarly, the polymer's fragility, as determined by dielectric spectroscopy, is also found to be little affected in the nanocomposites relative to the pure polymer. While a systematic study of the dependence of the bound polymer layer thickness on particle size remains an outstanding challenge, this first study provides conclusive evidence for the hypothesis that the bound polymer layer can be significantly smaller around nanoparticles than at chemically similar flat surfaces.",
author = "Harton, {Shane E.} and Kumar, {Sanat K.} and Hoichang Yang and Tadanori Koga and Kyle Hicks and Hyungki Lee and Jovan Mijovic and Ming Liu and Vallery, {Richard S.} and Gidley, {David W.}",
year = "2010",
month = "4",
day = "13",
doi = "10.1021/ma902484d",
language = "English (US)",
volume = "43",
pages = "3415--3421",
journal = "Macromolecules",
issn = "0024-9297",
publisher = "American Chemical Society",
number = "7",

}

TY - JOUR

T1 - Immobilized polymer layers on spherical nanoparticles

AU - Harton, Shane E.

AU - Kumar, Sanat K.

AU - Yang, Hoichang

AU - Koga, Tadanori

AU - Hicks, Kyle

AU - Lee, Hyungki

AU - Mijovic, Jovan

AU - Liu, Ming

AU - Vallery, Richard S.

AU - Gidley, David W.

PY - 2010/4/13

Y1 - 2010/4/13

N2 - Polymer properties, such as their mechanical strength, barrier properties, and dielectric response, can be dramatically improved by the addition of nanoparticles. This improvement is thought to be because the surface area per unit mass of particles increases with decreasing particle size, R, as 1/R. This favorable effect has to be reconciled with the expectation that at small enough R the nanoparticles must behave akin to a solvent and cause a deterioration of properties. How does this transition in behavior from large solutes to the solvent limit occur? We conjecture that for small enough particles the layer of polymer affected by the particles ("bound" polymer layer) must be much smaller than that for large particles: the favorable effect of increasing particle surface area can thus be overcome and lead to the small solvent limit with unfavorable mechanical properties, for example. To substantiate this picture requires that we measure and compare the "bound polymer layer" formed on nanoparticles with those near large particles with equivalent chemistry. We have implemented a novel strategy to obtain uniform nanoparticle dispersion in polymers, a problem for many previous works. Then, by combining theory and a suite of experimental techniques, including differential scanning calorimetry and positron annihilation lifetime spectroscopy, we show that the immobilized poly(2-vinylpyridine) layer near 15 nm diameter silica particles (∼1 nm) is considerably thinner than that at flat silica surfaces (∼4 to 5 nm), which is the limit of an infinitely large particle. We have also determined that the changes in the polymer's glass-transition temperature due to the presence of this strongly interacting surface are very small in both well-dispersed nanocomposites and thin films ( < 100 nm). Similarly, the polymer's fragility, as determined by dielectric spectroscopy, is also found to be little affected in the nanocomposites relative to the pure polymer. While a systematic study of the dependence of the bound polymer layer thickness on particle size remains an outstanding challenge, this first study provides conclusive evidence for the hypothesis that the bound polymer layer can be significantly smaller around nanoparticles than at chemically similar flat surfaces.

AB - Polymer properties, such as their mechanical strength, barrier properties, and dielectric response, can be dramatically improved by the addition of nanoparticles. This improvement is thought to be because the surface area per unit mass of particles increases with decreasing particle size, R, as 1/R. This favorable effect has to be reconciled with the expectation that at small enough R the nanoparticles must behave akin to a solvent and cause a deterioration of properties. How does this transition in behavior from large solutes to the solvent limit occur? We conjecture that for small enough particles the layer of polymer affected by the particles ("bound" polymer layer) must be much smaller than that for large particles: the favorable effect of increasing particle surface area can thus be overcome and lead to the small solvent limit with unfavorable mechanical properties, for example. To substantiate this picture requires that we measure and compare the "bound polymer layer" formed on nanoparticles with those near large particles with equivalent chemistry. We have implemented a novel strategy to obtain uniform nanoparticle dispersion in polymers, a problem for many previous works. Then, by combining theory and a suite of experimental techniques, including differential scanning calorimetry and positron annihilation lifetime spectroscopy, we show that the immobilized poly(2-vinylpyridine) layer near 15 nm diameter silica particles (∼1 nm) is considerably thinner than that at flat silica surfaces (∼4 to 5 nm), which is the limit of an infinitely large particle. We have also determined that the changes in the polymer's glass-transition temperature due to the presence of this strongly interacting surface are very small in both well-dispersed nanocomposites and thin films ( < 100 nm). Similarly, the polymer's fragility, as determined by dielectric spectroscopy, is also found to be little affected in the nanocomposites relative to the pure polymer. While a systematic study of the dependence of the bound polymer layer thickness on particle size remains an outstanding challenge, this first study provides conclusive evidence for the hypothesis that the bound polymer layer can be significantly smaller around nanoparticles than at chemically similar flat surfaces.

UR - http://www.scopus.com/inward/record.url?scp=77951518865&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951518865&partnerID=8YFLogxK

U2 - 10.1021/ma902484d

DO - 10.1021/ma902484d

M3 - Article

AN - SCOPUS:77951518865

VL - 43

SP - 3415

EP - 3421

JO - Macromolecules

JF - Macromolecules

SN - 0024-9297

IS - 7

ER -