Hot embossed polyethylene through-hole chips for bead-based microfluidicdevices

Jie Chou, Nan Du, Tina Ou, Pierre N. Floriano, Nicolaos Christodoulides, John McDevitt

Research output: Contribution to journalArticle

Abstract

Over the past decade, there has been a growth of interest in the translation of microfluidic systems into real-world clinical practice, especially for use in point-of-care or near patient settings. While initial fabrication advances in microfluidics involved mainly the etching of silicon and glass, the economics of scaling of these materials is not amendable for point-of-care usage where single-test applications force cost considerations to be kept low and throughput high. As such, materials base more consistent with point-of-care needs is required. In this manuscript, the fabrication of a hot embossed, through-hole low-density polyethylene ensembles derived from an anisotropically etched silicon wafer is discussed. This semi-opaque polymer that can be easily sterilized and recycled provides low background noise for fluorescence measurements and yields more affordable cost than other thermoplastics commonly used for microfluidic applications such as cyclic olefin copolymer (COC). To fabrication through-hole microchips from this alternative material for microfluidics, a fabrication technique that uses a high-temperature, high-pressure resistant mold is described. This aluminum-based epoxy mold, serving as the positive master mold for embossing, is casted over etched arrays of pyramidal pits in a silicon wafer. Methods of surface treatment of the wafer prior to casting and PDMS casting of the epoxy are discussed to preserve the silicon wafer for future use. Changes in the thickness of polyethylene are observed for varying embossing temperatures. The methodology described herein can quickly fabricate 20 disposable, single use chips in less than 30. min with the ability to scale up 4 times by using multiple molds simultaneously. When coupled as a platform supporting porous bead sensors, as in the recently developed Programmable Bio-Nano-Chip, this bead chip system can achieve limits of detection, for the cardiac biomarker C-reactive protein, of 0.3. ng/mL, thereby demonstrating that the approach is compatible with high performance, real-world clinical measurements in the context of point-of-care testing.

Original languageEnglish (US)
Pages (from-to)653-660
Number of pages8
JournalBiosensors and Bioelectronics
Volume42
Issue number1
DOIs
StatePublished - Apr 5 2013

Fingerprint

Microfluidics
Point-of-Care Systems
Polyethylene
Silicon
Polyethylenes
Silicon wafers
Fabrication
Fungi
Casting
Cycloparaffins
Costs and Cost Analysis
Temperature
Molds
Low density polyethylenes
Biomarkers
Aluminum
C-Reactive Protein
Thermoplastics
Olefins
Glass

Keywords

  • Beads
  • Hot embossing
  • Immunoassays
  • Microfluidics
  • Point-of-care
  • Thermoplastics

ASJC Scopus subject areas

  • Biophysics
  • Biomedical Engineering
  • Biotechnology
  • Electrochemistry

Cite this

Hot embossed polyethylene through-hole chips for bead-based microfluidicdevices. / Chou, Jie; Du, Nan; Ou, Tina; Floriano, Pierre N.; Christodoulides, Nicolaos; McDevitt, John.

In: Biosensors and Bioelectronics, Vol. 42, No. 1, 05.04.2013, p. 653-660.

Research output: Contribution to journalArticle

Chou, Jie ; Du, Nan ; Ou, Tina ; Floriano, Pierre N. ; Christodoulides, Nicolaos ; McDevitt, John. / Hot embossed polyethylene through-hole chips for bead-based microfluidicdevices. In: Biosensors and Bioelectronics. 2013 ; Vol. 42, No. 1. pp. 653-660.
@article{d830a308e66a4820b31ca2e002067060,
title = "Hot embossed polyethylene through-hole chips for bead-based microfluidicdevices",
abstract = "Over the past decade, there has been a growth of interest in the translation of microfluidic systems into real-world clinical practice, especially for use in point-of-care or near patient settings. While initial fabrication advances in microfluidics involved mainly the etching of silicon and glass, the economics of scaling of these materials is not amendable for point-of-care usage where single-test applications force cost considerations to be kept low and throughput high. As such, materials base more consistent with point-of-care needs is required. In this manuscript, the fabrication of a hot embossed, through-hole low-density polyethylene ensembles derived from an anisotropically etched silicon wafer is discussed. This semi-opaque polymer that can be easily sterilized and recycled provides low background noise for fluorescence measurements and yields more affordable cost than other thermoplastics commonly used for microfluidic applications such as cyclic olefin copolymer (COC). To fabrication through-hole microchips from this alternative material for microfluidics, a fabrication technique that uses a high-temperature, high-pressure resistant mold is described. This aluminum-based epoxy mold, serving as the positive master mold for embossing, is casted over etched arrays of pyramidal pits in a silicon wafer. Methods of surface treatment of the wafer prior to casting and PDMS casting of the epoxy are discussed to preserve the silicon wafer for future use. Changes in the thickness of polyethylene are observed for varying embossing temperatures. The methodology described herein can quickly fabricate 20 disposable, single use chips in less than 30. min with the ability to scale up 4 times by using multiple molds simultaneously. When coupled as a platform supporting porous bead sensors, as in the recently developed Programmable Bio-Nano-Chip, this bead chip system can achieve limits of detection, for the cardiac biomarker C-reactive protein, of 0.3. ng/mL, thereby demonstrating that the approach is compatible with high performance, real-world clinical measurements in the context of point-of-care testing.",
keywords = "Beads, Hot embossing, Immunoassays, Microfluidics, Point-of-care, Thermoplastics",
author = "Jie Chou and Nan Du and Tina Ou and Floriano, {Pierre N.} and Nicolaos Christodoulides and John McDevitt",
year = "2013",
month = "4",
day = "5",
doi = "10.1016/j.bios.2012.09.056",
language = "English (US)",
volume = "42",
pages = "653--660",
journal = "Biosensors",
issn = "0956-5663",
publisher = "Elsevier Limited",
number = "1",

}

TY - JOUR

T1 - Hot embossed polyethylene through-hole chips for bead-based microfluidicdevices

AU - Chou, Jie

AU - Du, Nan

AU - Ou, Tina

AU - Floriano, Pierre N.

AU - Christodoulides, Nicolaos

AU - McDevitt, John

PY - 2013/4/5

Y1 - 2013/4/5

N2 - Over the past decade, there has been a growth of interest in the translation of microfluidic systems into real-world clinical practice, especially for use in point-of-care or near patient settings. While initial fabrication advances in microfluidics involved mainly the etching of silicon and glass, the economics of scaling of these materials is not amendable for point-of-care usage where single-test applications force cost considerations to be kept low and throughput high. As such, materials base more consistent with point-of-care needs is required. In this manuscript, the fabrication of a hot embossed, through-hole low-density polyethylene ensembles derived from an anisotropically etched silicon wafer is discussed. This semi-opaque polymer that can be easily sterilized and recycled provides low background noise for fluorescence measurements and yields more affordable cost than other thermoplastics commonly used for microfluidic applications such as cyclic olefin copolymer (COC). To fabrication through-hole microchips from this alternative material for microfluidics, a fabrication technique that uses a high-temperature, high-pressure resistant mold is described. This aluminum-based epoxy mold, serving as the positive master mold for embossing, is casted over etched arrays of pyramidal pits in a silicon wafer. Methods of surface treatment of the wafer prior to casting and PDMS casting of the epoxy are discussed to preserve the silicon wafer for future use. Changes in the thickness of polyethylene are observed for varying embossing temperatures. The methodology described herein can quickly fabricate 20 disposable, single use chips in less than 30. min with the ability to scale up 4 times by using multiple molds simultaneously. When coupled as a platform supporting porous bead sensors, as in the recently developed Programmable Bio-Nano-Chip, this bead chip system can achieve limits of detection, for the cardiac biomarker C-reactive protein, of 0.3. ng/mL, thereby demonstrating that the approach is compatible with high performance, real-world clinical measurements in the context of point-of-care testing.

AB - Over the past decade, there has been a growth of interest in the translation of microfluidic systems into real-world clinical practice, especially for use in point-of-care or near patient settings. While initial fabrication advances in microfluidics involved mainly the etching of silicon and glass, the economics of scaling of these materials is not amendable for point-of-care usage where single-test applications force cost considerations to be kept low and throughput high. As such, materials base more consistent with point-of-care needs is required. In this manuscript, the fabrication of a hot embossed, through-hole low-density polyethylene ensembles derived from an anisotropically etched silicon wafer is discussed. This semi-opaque polymer that can be easily sterilized and recycled provides low background noise for fluorescence measurements and yields more affordable cost than other thermoplastics commonly used for microfluidic applications such as cyclic olefin copolymer (COC). To fabrication through-hole microchips from this alternative material for microfluidics, a fabrication technique that uses a high-temperature, high-pressure resistant mold is described. This aluminum-based epoxy mold, serving as the positive master mold for embossing, is casted over etched arrays of pyramidal pits in a silicon wafer. Methods of surface treatment of the wafer prior to casting and PDMS casting of the epoxy are discussed to preserve the silicon wafer for future use. Changes in the thickness of polyethylene are observed for varying embossing temperatures. The methodology described herein can quickly fabricate 20 disposable, single use chips in less than 30. min with the ability to scale up 4 times by using multiple molds simultaneously. When coupled as a platform supporting porous bead sensors, as in the recently developed Programmable Bio-Nano-Chip, this bead chip system can achieve limits of detection, for the cardiac biomarker C-reactive protein, of 0.3. ng/mL, thereby demonstrating that the approach is compatible with high performance, real-world clinical measurements in the context of point-of-care testing.

KW - Beads

KW - Hot embossing

KW - Immunoassays

KW - Microfluidics

KW - Point-of-care

KW - Thermoplastics

UR - http://www.scopus.com/inward/record.url?scp=84873740557&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84873740557&partnerID=8YFLogxK

U2 - 10.1016/j.bios.2012.09.056

DO - 10.1016/j.bios.2012.09.056

M3 - Article

C2 - 23183187

AN - SCOPUS:84873740557

VL - 42

SP - 653

EP - 660

JO - Biosensors

JF - Biosensors

SN - 0956-5663

IS - 1

ER -