Fault detection and diagnosis relying on set membership identification for time varying systems

Vasso Reppa, Antonios Tzes

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, a Fault Detection and Diagnosis (FDD) method relying on Set Membership Identification (SMI) is presented, aiming at the detection of multiple abrupt parameter variations for a time varying system. The proposed method utilizes a jump linearly parametrizable model, assuming unknown but bounded measurement noise and parameter perturbations. The objective of SMI is to compute at every time instant the orthotope containing the nominal parameter vector, while a fault is detected at the time instant that this orthotope is empty. In order to proceed to fault isolation and identification, an update of the SMI procedure is realized. The fault isolation is based on the orthotopes' projections, whose centers are used for fault identification. Simulations studies are used to verify the efficiency of the suggested method applied in an Atomic Force Microscope.

Original languageEnglish (US)
Title of host publicationConference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts
Pages702-707
Number of pages6
DOIs
StatePublished - Dec 1 2010
Event1st Conference on Control and Fault-Tolerant Systems, SysTol'10 - Nice, France
Duration: Oct 6 2010Oct 8 2010

Other

Other1st Conference on Control and Fault-Tolerant Systems, SysTol'10
CountryFrance
CityNice
Period10/6/1010/8/10

Fingerprint

Time varying systems
Fault detection
Failure analysis
Identification (control systems)
Microscopes

Keywords

  • Atomic force microscope
  • Fault detection
  • Fault identification
  • Fault isolation
  • Set membership identification

ASJC Scopus subject areas

  • Control and Systems Engineering

Cite this

Reppa, V., & Tzes, A. (2010). Fault detection and diagnosis relying on set membership identification for time varying systems. In Conference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts (pp. 702-707). [5676068] https://doi.org/10.1109/SYSTOL.2010.5676068

Fault detection and diagnosis relying on set membership identification for time varying systems. / Reppa, Vasso; Tzes, Antonios.

Conference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts. 2010. p. 702-707 5676068.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reppa, V & Tzes, A 2010, Fault detection and diagnosis relying on set membership identification for time varying systems. in Conference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts., 5676068, pp. 702-707, 1st Conference on Control and Fault-Tolerant Systems, SysTol'10, Nice, France, 10/6/10. https://doi.org/10.1109/SYSTOL.2010.5676068
Reppa V, Tzes A. Fault detection and diagnosis relying on set membership identification for time varying systems. In Conference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts. 2010. p. 702-707. 5676068 https://doi.org/10.1109/SYSTOL.2010.5676068
Reppa, Vasso ; Tzes, Antonios. / Fault detection and diagnosis relying on set membership identification for time varying systems. Conference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts. 2010. pp. 702-707
@inproceedings{df53315aa7774d61b03b89b3601b7930,
title = "Fault detection and diagnosis relying on set membership identification for time varying systems",
abstract = "In this paper, a Fault Detection and Diagnosis (FDD) method relying on Set Membership Identification (SMI) is presented, aiming at the detection of multiple abrupt parameter variations for a time varying system. The proposed method utilizes a jump linearly parametrizable model, assuming unknown but bounded measurement noise and parameter perturbations. The objective of SMI is to compute at every time instant the orthotope containing the nominal parameter vector, while a fault is detected at the time instant that this orthotope is empty. In order to proceed to fault isolation and identification, an update of the SMI procedure is realized. The fault isolation is based on the orthotopes' projections, whose centers are used for fault identification. Simulations studies are used to verify the efficiency of the suggested method applied in an Atomic Force Microscope.",
keywords = "Atomic force microscope, Fault detection, Fault identification, Fault isolation, Set membership identification",
author = "Vasso Reppa and Antonios Tzes",
year = "2010",
month = "12",
day = "1",
doi = "10.1109/SYSTOL.2010.5676068",
language = "English (US)",
isbn = "9781424481545",
pages = "702--707",
booktitle = "Conference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts",

}

TY - GEN

T1 - Fault detection and diagnosis relying on set membership identification for time varying systems

AU - Reppa, Vasso

AU - Tzes, Antonios

PY - 2010/12/1

Y1 - 2010/12/1

N2 - In this paper, a Fault Detection and Diagnosis (FDD) method relying on Set Membership Identification (SMI) is presented, aiming at the detection of multiple abrupt parameter variations for a time varying system. The proposed method utilizes a jump linearly parametrizable model, assuming unknown but bounded measurement noise and parameter perturbations. The objective of SMI is to compute at every time instant the orthotope containing the nominal parameter vector, while a fault is detected at the time instant that this orthotope is empty. In order to proceed to fault isolation and identification, an update of the SMI procedure is realized. The fault isolation is based on the orthotopes' projections, whose centers are used for fault identification. Simulations studies are used to verify the efficiency of the suggested method applied in an Atomic Force Microscope.

AB - In this paper, a Fault Detection and Diagnosis (FDD) method relying on Set Membership Identification (SMI) is presented, aiming at the detection of multiple abrupt parameter variations for a time varying system. The proposed method utilizes a jump linearly parametrizable model, assuming unknown but bounded measurement noise and parameter perturbations. The objective of SMI is to compute at every time instant the orthotope containing the nominal parameter vector, while a fault is detected at the time instant that this orthotope is empty. In order to proceed to fault isolation and identification, an update of the SMI procedure is realized. The fault isolation is based on the orthotopes' projections, whose centers are used for fault identification. Simulations studies are used to verify the efficiency of the suggested method applied in an Atomic Force Microscope.

KW - Atomic force microscope

KW - Fault detection

KW - Fault identification

KW - Fault isolation

KW - Set membership identification

UR - http://www.scopus.com/inward/record.url?scp=78751652449&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78751652449&partnerID=8YFLogxK

U2 - 10.1109/SYSTOL.2010.5676068

DO - 10.1109/SYSTOL.2010.5676068

M3 - Conference contribution

SN - 9781424481545

SP - 702

EP - 707

BT - Conference on Control and Fault-Tolerant Systems, SysTol'10 - Final Program and Book of Abstracts

ER -