Failure of glass-microballoons/thermoset-matrix syntactic foams subject to hydrostatic loading

Lorenzo Bardella, Giovanni Perini, Andrea Panteghini, Noel Tessier, Nikhil Gupta, Maurizio Porfiri

Research output: Contribution to journalArticle

Abstract

This study focuses on a lightweight syntactic foam constituted by an epoxy matrix filled with polydispersed Glass Microballoons (GMs) up to 0.75 volume fraction. We present experimental results on hydrostatic loading which demonstrate the possibility of different failure modes depending on whether the surface of the composite is painted/coated or not. In order to explain this surprising behaviour, we propose a three-dimensional Finite Element (FE) micromechanical model. First, we develop a cubic MultiParticle Unit Cell (MPUC) which includes 100 randomly placed GMs and accounting for their polydispersion, in terms of both size and radius ratio. This model is validated by subjecting it to effective uniaxial stress and comparing its predictions of the elastic moduli with experimental findings and an analytical homogenisation technique. Second, towards modelling failure, we implement a structural criterion proposed by our group, which posits that any GM undergoes brittle failure when its average elastic energy density reaches a critical value. We then utilise our measurements of the effective strength under uniaxial compressive stress to identify different critical values for selected types of GMs. Third, on the basis of the MPUC, we reach our goal by developing a larger FE model, including 300 GMs, which enables the study of the stress diffusion from the external surface through an appropriately thick layer of composite, under macroscopic uniform pressure. This micromechanical model allows us to demonstrate the influence of the paint/coating on the syntactic foam failure mode through a detailed analysis of the collapsed GMs and the matrix stress state.

Original languageEnglish (US)
Pages (from-to)58-74
Number of pages17
JournalEuropean Journal of Mechanics, A/Solids
Volume70
DOIs
StatePublished - Jul 1 2018

Fingerprint

microballoons
Thermosets
Syntactics
hydrostatics
foams
Foams
Glass
glass
matrices
failure modes
Failure modes
composite materials
Composite materials
paints
homogenizing
cells
Compressive stress
Paint
Volume fraction
modulus of elasticity

Keywords

  • Failure mode
  • Finite element method
  • Glass microballoons
  • Micromechanics
  • Stress diffusion
  • Surface coating
  • Syntactic foam

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering
  • Physics and Astronomy(all)

Cite this

Failure of glass-microballoons/thermoset-matrix syntactic foams subject to hydrostatic loading. / Bardella, Lorenzo; Perini, Giovanni; Panteghini, Andrea; Tessier, Noel; Gupta, Nikhil; Porfiri, Maurizio.

In: European Journal of Mechanics, A/Solids, Vol. 70, 01.07.2018, p. 58-74.

Research output: Contribution to journalArticle

@article{7d34ab701cd741cfb1da7d0935a12c82,
title = "Failure of glass-microballoons/thermoset-matrix syntactic foams subject to hydrostatic loading",
abstract = "This study focuses on a lightweight syntactic foam constituted by an epoxy matrix filled with polydispersed Glass Microballoons (GMs) up to 0.75 volume fraction. We present experimental results on hydrostatic loading which demonstrate the possibility of different failure modes depending on whether the surface of the composite is painted/coated or not. In order to explain this surprising behaviour, we propose a three-dimensional Finite Element (FE) micromechanical model. First, we develop a cubic MultiParticle Unit Cell (MPUC) which includes 100 randomly placed GMs and accounting for their polydispersion, in terms of both size and radius ratio. This model is validated by subjecting it to effective uniaxial stress and comparing its predictions of the elastic moduli with experimental findings and an analytical homogenisation technique. Second, towards modelling failure, we implement a structural criterion proposed by our group, which posits that any GM undergoes brittle failure when its average elastic energy density reaches a critical value. We then utilise our measurements of the effective strength under uniaxial compressive stress to identify different critical values for selected types of GMs. Third, on the basis of the MPUC, we reach our goal by developing a larger FE model, including 300 GMs, which enables the study of the stress diffusion from the external surface through an appropriately thick layer of composite, under macroscopic uniform pressure. This micromechanical model allows us to demonstrate the influence of the paint/coating on the syntactic foam failure mode through a detailed analysis of the collapsed GMs and the matrix stress state.",
keywords = "Failure mode, Finite element method, Glass microballoons, Micromechanics, Stress diffusion, Surface coating, Syntactic foam",
author = "Lorenzo Bardella and Giovanni Perini and Andrea Panteghini and Noel Tessier and Nikhil Gupta and Maurizio Porfiri",
year = "2018",
month = "7",
day = "1",
doi = "10.1016/j.euromechsol.2018.01.007",
language = "English (US)",
volume = "70",
pages = "58--74",
journal = "European Journal of Mechanics, A/Solids",
issn = "0997-7538",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Failure of glass-microballoons/thermoset-matrix syntactic foams subject to hydrostatic loading

AU - Bardella, Lorenzo

AU - Perini, Giovanni

AU - Panteghini, Andrea

AU - Tessier, Noel

AU - Gupta, Nikhil

AU - Porfiri, Maurizio

PY - 2018/7/1

Y1 - 2018/7/1

N2 - This study focuses on a lightweight syntactic foam constituted by an epoxy matrix filled with polydispersed Glass Microballoons (GMs) up to 0.75 volume fraction. We present experimental results on hydrostatic loading which demonstrate the possibility of different failure modes depending on whether the surface of the composite is painted/coated or not. In order to explain this surprising behaviour, we propose a three-dimensional Finite Element (FE) micromechanical model. First, we develop a cubic MultiParticle Unit Cell (MPUC) which includes 100 randomly placed GMs and accounting for their polydispersion, in terms of both size and radius ratio. This model is validated by subjecting it to effective uniaxial stress and comparing its predictions of the elastic moduli with experimental findings and an analytical homogenisation technique. Second, towards modelling failure, we implement a structural criterion proposed by our group, which posits that any GM undergoes brittle failure when its average elastic energy density reaches a critical value. We then utilise our measurements of the effective strength under uniaxial compressive stress to identify different critical values for selected types of GMs. Third, on the basis of the MPUC, we reach our goal by developing a larger FE model, including 300 GMs, which enables the study of the stress diffusion from the external surface through an appropriately thick layer of composite, under macroscopic uniform pressure. This micromechanical model allows us to demonstrate the influence of the paint/coating on the syntactic foam failure mode through a detailed analysis of the collapsed GMs and the matrix stress state.

AB - This study focuses on a lightweight syntactic foam constituted by an epoxy matrix filled with polydispersed Glass Microballoons (GMs) up to 0.75 volume fraction. We present experimental results on hydrostatic loading which demonstrate the possibility of different failure modes depending on whether the surface of the composite is painted/coated or not. In order to explain this surprising behaviour, we propose a three-dimensional Finite Element (FE) micromechanical model. First, we develop a cubic MultiParticle Unit Cell (MPUC) which includes 100 randomly placed GMs and accounting for their polydispersion, in terms of both size and radius ratio. This model is validated by subjecting it to effective uniaxial stress and comparing its predictions of the elastic moduli with experimental findings and an analytical homogenisation technique. Second, towards modelling failure, we implement a structural criterion proposed by our group, which posits that any GM undergoes brittle failure when its average elastic energy density reaches a critical value. We then utilise our measurements of the effective strength under uniaxial compressive stress to identify different critical values for selected types of GMs. Third, on the basis of the MPUC, we reach our goal by developing a larger FE model, including 300 GMs, which enables the study of the stress diffusion from the external surface through an appropriately thick layer of composite, under macroscopic uniform pressure. This micromechanical model allows us to demonstrate the influence of the paint/coating on the syntactic foam failure mode through a detailed analysis of the collapsed GMs and the matrix stress state.

KW - Failure mode

KW - Finite element method

KW - Glass microballoons

KW - Micromechanics

KW - Stress diffusion

KW - Surface coating

KW - Syntactic foam

UR - http://www.scopus.com/inward/record.url?scp=85042172663&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85042172663&partnerID=8YFLogxK

U2 - 10.1016/j.euromechsol.2018.01.007

DO - 10.1016/j.euromechsol.2018.01.007

M3 - Article

VL - 70

SP - 58

EP - 74

JO - European Journal of Mechanics, A/Solids

JF - European Journal of Mechanics, A/Solids

SN - 0997-7538

ER -