Experimental Parameter Determination and Laboratory Verification of the Inverse Hysteresis Model for Single-Phase Toroidal Transformers

Carlos H. Alonso, Saeed Jazebi, Francisco De Leon

Research output: Contribution to journalArticle

Abstract

This paper presents a laboratory test procedure to determine the parameters of the inverse hysteresis model (IHM) applicable to single-phase toroidal transformer low-frequency modeling. The model parameters are obtained through a fitting procedure of the history-independent IHM of a series of open-circuit experiments and waveform recordings. These experiments can be easily executed during the transformer acceptance testing at the factory laboratory. The performance of the model is verified under various operational conditions, such as sinusoidal excitation, varied frequencies and voltages, and non-sinusoidal excitations. The results show that the model performs very well under all tested conditions giving great confidence that the proposed method can be used for parameter determination.

Original languageEnglish (US)
Article number7511768
JournalIEEE Transactions on Magnetics
Volume52
Issue number11
DOIs
StatePublished - Nov 1 2016

Fingerprint

Hysteresis
Industrial plants
Experiments
Networks (circuits)
Testing
Electric potential

Keywords

  • Excess losses
  • inverse hysteresis model (IHM)
  • quasi-static hysteresis measurement
  • transformer modeling

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Experimental Parameter Determination and Laboratory Verification of the Inverse Hysteresis Model for Single-Phase Toroidal Transformers. / Alonso, Carlos H.; Jazebi, Saeed; De Leon, Francisco.

In: IEEE Transactions on Magnetics, Vol. 52, No. 11, 7511768, 01.11.2016.

Research output: Contribution to journalArticle

@article{364c19cfebbe4770bb999a3e7c27e056,
title = "Experimental Parameter Determination and Laboratory Verification of the Inverse Hysteresis Model for Single-Phase Toroidal Transformers",
abstract = "This paper presents a laboratory test procedure to determine the parameters of the inverse hysteresis model (IHM) applicable to single-phase toroidal transformer low-frequency modeling. The model parameters are obtained through a fitting procedure of the history-independent IHM of a series of open-circuit experiments and waveform recordings. These experiments can be easily executed during the transformer acceptance testing at the factory laboratory. The performance of the model is verified under various operational conditions, such as sinusoidal excitation, varied frequencies and voltages, and non-sinusoidal excitations. The results show that the model performs very well under all tested conditions giving great confidence that the proposed method can be used for parameter determination.",
keywords = "Excess losses, inverse hysteresis model (IHM), quasi-static hysteresis measurement, transformer modeling",
author = "Alonso, {Carlos H.} and Saeed Jazebi and {De Leon}, Francisco",
year = "2016",
month = "11",
day = "1",
doi = "10.1109/TMAG.2016.2591000",
language = "English (US)",
volume = "52",
journal = "IEEE Transactions on Magnetics",
issn = "0018-9464",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "11",

}

TY - JOUR

T1 - Experimental Parameter Determination and Laboratory Verification of the Inverse Hysteresis Model for Single-Phase Toroidal Transformers

AU - Alonso, Carlos H.

AU - Jazebi, Saeed

AU - De Leon, Francisco

PY - 2016/11/1

Y1 - 2016/11/1

N2 - This paper presents a laboratory test procedure to determine the parameters of the inverse hysteresis model (IHM) applicable to single-phase toroidal transformer low-frequency modeling. The model parameters are obtained through a fitting procedure of the history-independent IHM of a series of open-circuit experiments and waveform recordings. These experiments can be easily executed during the transformer acceptance testing at the factory laboratory. The performance of the model is verified under various operational conditions, such as sinusoidal excitation, varied frequencies and voltages, and non-sinusoidal excitations. The results show that the model performs very well under all tested conditions giving great confidence that the proposed method can be used for parameter determination.

AB - This paper presents a laboratory test procedure to determine the parameters of the inverse hysteresis model (IHM) applicable to single-phase toroidal transformer low-frequency modeling. The model parameters are obtained through a fitting procedure of the history-independent IHM of a series of open-circuit experiments and waveform recordings. These experiments can be easily executed during the transformer acceptance testing at the factory laboratory. The performance of the model is verified under various operational conditions, such as sinusoidal excitation, varied frequencies and voltages, and non-sinusoidal excitations. The results show that the model performs very well under all tested conditions giving great confidence that the proposed method can be used for parameter determination.

KW - Excess losses

KW - inverse hysteresis model (IHM)

KW - quasi-static hysteresis measurement

KW - transformer modeling

UR - http://www.scopus.com/inward/record.url?scp=84994016168&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84994016168&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2016.2591000

DO - 10.1109/TMAG.2016.2591000

M3 - Article

VL - 52

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 11

M1 - 7511768

ER -