Effect of thermocycling on biaxial flexural strength of CAD/CAM, bulk fill, and conventional resin composite materials

Ernesto Byron Benalcázar Jalkh, Camila Moreira Machado, Marcelo Giannini, Isabela Beltramini, Mariana Miranda De Toledo Piza, Paulo G. Coelho, Ronaldo Hirata, Estevam A. Bonfante

Research output: Contribution to journalArticle

Abstract

New resin-based restorative materials have been developed, such as computer-aided design/computer-aided manufacturing (CAD/ CAM) and bulk-fill composites, as an alternative to traditional layering techniques. This study evaluated the biaxial flexural strength (BFS) before and after thermocycling of five different resin composites: one hybrid resin/ ceramic CAD/CAM indirect material, Lava Ultimate CAD-CAM Restorative (LU, 3M Oral Care); a conventional composite, Filtek Z350 XT (Z350, 3M Oral Care); two bulk-fill composites, Tetric N-Ceram Bulk Fill (TBF, Ivoclar Vivadent) and Filtek Bulk Fill (FBF, 3M Oral Care); and one bulk-fill flow resin composite, Filtek Bulk Fill Flow (FBFF, 3M Oral Care). Three hundred disc-shaped specimens (6.5 mm in diameter and 0.5 mm thick) were fabricated and divided into five groups (n=30 for each composite and condition). The BFS test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min immediately (i, 24 hours) and after thermocycling (a, 500 thermal cycles of 58C to 558C with a 30-second dwell time). The Weibull modulus (m) and characteristic stress (g) were calculated, and a contour plot was used (m vs g) to detect differences between groups (95% two-sided confidence intervals). Significantly higher characteristic stress was observed for LUi (286.6 MPa) and Z350i (248.8 MPa) compared to the bulk-fill groups (FBFi=187.9 MPa, FBFFi=175.9 MPa, TBFi=149.9 MPa), with no differences between LUi and Z350i. Thermocycling significantly decreased the characteristic stress of all groups with the highest values observed for LUa (186.7 MPa) and Z350a (188.9 MPa) and the lowest for FBFFa (90.3 MPa). Intermediate values were observed for FBFa (151.6 MPa) and TBFa (122.8 MPa). The Weibull modulus decreased only for FBFa compared to FBFi. Composition and thermocycling significantly influenced the biaxial flexural strength of resin composite materials.

Original languageEnglish (US)
Pages (from-to)E254-E262
JournalOperative Dentistry
Volume44
Issue number5
DOIs
StatePublished - Jan 1 2019

Fingerprint

Computer-Aided Design
Composite Resins
Ceramics
Hot Temperature
Confidence Intervals

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Jalkh, E. B. B., Machado, C. M., Giannini, M., Beltramini, I., De Toledo Piza, M. M., Coelho, P. G., ... Bonfante, E. A. (2019). Effect of thermocycling on biaxial flexural strength of CAD/CAM, bulk fill, and conventional resin composite materials. Operative Dentistry, 44(5), E254-E262. https://doi.org/10.2341/18-146-L

Effect of thermocycling on biaxial flexural strength of CAD/CAM, bulk fill, and conventional resin composite materials. / Jalkh, Ernesto Byron Benalcázar; Machado, Camila Moreira; Giannini, Marcelo; Beltramini, Isabela; De Toledo Piza, Mariana Miranda; Coelho, Paulo G.; Hirata, Ronaldo; Bonfante, Estevam A.

In: Operative Dentistry, Vol. 44, No. 5, 01.01.2019, p. E254-E262.

Research output: Contribution to journalArticle

Jalkh, EBB, Machado, CM, Giannini, M, Beltramini, I, De Toledo Piza, MM, Coelho, PG, Hirata, R & Bonfante, EA 2019, 'Effect of thermocycling on biaxial flexural strength of CAD/CAM, bulk fill, and conventional resin composite materials', Operative Dentistry, vol. 44, no. 5, pp. E254-E262. https://doi.org/10.2341/18-146-L
Jalkh, Ernesto Byron Benalcázar ; Machado, Camila Moreira ; Giannini, Marcelo ; Beltramini, Isabela ; De Toledo Piza, Mariana Miranda ; Coelho, Paulo G. ; Hirata, Ronaldo ; Bonfante, Estevam A. / Effect of thermocycling on biaxial flexural strength of CAD/CAM, bulk fill, and conventional resin composite materials. In: Operative Dentistry. 2019 ; Vol. 44, No. 5. pp. E254-E262.
@article{3a1a5824df6648e2bd48b0c42f384cfc,
title = "Effect of thermocycling on biaxial flexural strength of CAD/CAM, bulk fill, and conventional resin composite materials",
abstract = "New resin-based restorative materials have been developed, such as computer-aided design/computer-aided manufacturing (CAD/ CAM) and bulk-fill composites, as an alternative to traditional layering techniques. This study evaluated the biaxial flexural strength (BFS) before and after thermocycling of five different resin composites: one hybrid resin/ ceramic CAD/CAM indirect material, Lava Ultimate CAD-CAM Restorative (LU, 3M Oral Care); a conventional composite, Filtek Z350 XT (Z350, 3M Oral Care); two bulk-fill composites, Tetric N-Ceram Bulk Fill (TBF, Ivoclar Vivadent) and Filtek Bulk Fill (FBF, 3M Oral Care); and one bulk-fill flow resin composite, Filtek Bulk Fill Flow (FBFF, 3M Oral Care). Three hundred disc-shaped specimens (6.5 mm in diameter and 0.5 mm thick) were fabricated and divided into five groups (n=30 for each composite and condition). The BFS test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min immediately (i, 24 hours) and after thermocycling (a, 500 thermal cycles of 58C to 558C with a 30-second dwell time). The Weibull modulus (m) and characteristic stress (g) were calculated, and a contour plot was used (m vs g) to detect differences between groups (95{\%} two-sided confidence intervals). Significantly higher characteristic stress was observed for LUi (286.6 MPa) and Z350i (248.8 MPa) compared to the bulk-fill groups (FBFi=187.9 MPa, FBFFi=175.9 MPa, TBFi=149.9 MPa), with no differences between LUi and Z350i. Thermocycling significantly decreased the characteristic stress of all groups with the highest values observed for LUa (186.7 MPa) and Z350a (188.9 MPa) and the lowest for FBFFa (90.3 MPa). Intermediate values were observed for FBFa (151.6 MPa) and TBFa (122.8 MPa). The Weibull modulus decreased only for FBFa compared to FBFi. Composition and thermocycling significantly influenced the biaxial flexural strength of resin composite materials.",
author = "Jalkh, {Ernesto Byron Benalc{\'a}zar} and Machado, {Camila Moreira} and Marcelo Giannini and Isabela Beltramini and {De Toledo Piza}, {Mariana Miranda} and Coelho, {Paulo G.} and Ronaldo Hirata and Bonfante, {Estevam A.}",
year = "2019",
month = "1",
day = "1",
doi = "10.2341/18-146-L",
language = "English (US)",
volume = "44",
pages = "E254--E262",
journal = "Operative Dentistry",
issn = "0361-7734",
publisher = "Indiana University School of Dentistry",
number = "5",

}

TY - JOUR

T1 - Effect of thermocycling on biaxial flexural strength of CAD/CAM, bulk fill, and conventional resin composite materials

AU - Jalkh, Ernesto Byron Benalcázar

AU - Machado, Camila Moreira

AU - Giannini, Marcelo

AU - Beltramini, Isabela

AU - De Toledo Piza, Mariana Miranda

AU - Coelho, Paulo G.

AU - Hirata, Ronaldo

AU - Bonfante, Estevam A.

PY - 2019/1/1

Y1 - 2019/1/1

N2 - New resin-based restorative materials have been developed, such as computer-aided design/computer-aided manufacturing (CAD/ CAM) and bulk-fill composites, as an alternative to traditional layering techniques. This study evaluated the biaxial flexural strength (BFS) before and after thermocycling of five different resin composites: one hybrid resin/ ceramic CAD/CAM indirect material, Lava Ultimate CAD-CAM Restorative (LU, 3M Oral Care); a conventional composite, Filtek Z350 XT (Z350, 3M Oral Care); two bulk-fill composites, Tetric N-Ceram Bulk Fill (TBF, Ivoclar Vivadent) and Filtek Bulk Fill (FBF, 3M Oral Care); and one bulk-fill flow resin composite, Filtek Bulk Fill Flow (FBFF, 3M Oral Care). Three hundred disc-shaped specimens (6.5 mm in diameter and 0.5 mm thick) were fabricated and divided into five groups (n=30 for each composite and condition). The BFS test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min immediately (i, 24 hours) and after thermocycling (a, 500 thermal cycles of 58C to 558C with a 30-second dwell time). The Weibull modulus (m) and characteristic stress (g) were calculated, and a contour plot was used (m vs g) to detect differences between groups (95% two-sided confidence intervals). Significantly higher characteristic stress was observed for LUi (286.6 MPa) and Z350i (248.8 MPa) compared to the bulk-fill groups (FBFi=187.9 MPa, FBFFi=175.9 MPa, TBFi=149.9 MPa), with no differences between LUi and Z350i. Thermocycling significantly decreased the characteristic stress of all groups with the highest values observed for LUa (186.7 MPa) and Z350a (188.9 MPa) and the lowest for FBFFa (90.3 MPa). Intermediate values were observed for FBFa (151.6 MPa) and TBFa (122.8 MPa). The Weibull modulus decreased only for FBFa compared to FBFi. Composition and thermocycling significantly influenced the biaxial flexural strength of resin composite materials.

AB - New resin-based restorative materials have been developed, such as computer-aided design/computer-aided manufacturing (CAD/ CAM) and bulk-fill composites, as an alternative to traditional layering techniques. This study evaluated the biaxial flexural strength (BFS) before and after thermocycling of five different resin composites: one hybrid resin/ ceramic CAD/CAM indirect material, Lava Ultimate CAD-CAM Restorative (LU, 3M Oral Care); a conventional composite, Filtek Z350 XT (Z350, 3M Oral Care); two bulk-fill composites, Tetric N-Ceram Bulk Fill (TBF, Ivoclar Vivadent) and Filtek Bulk Fill (FBF, 3M Oral Care); and one bulk-fill flow resin composite, Filtek Bulk Fill Flow (FBFF, 3M Oral Care). Three hundred disc-shaped specimens (6.5 mm in diameter and 0.5 mm thick) were fabricated and divided into five groups (n=30 for each composite and condition). The BFS test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min immediately (i, 24 hours) and after thermocycling (a, 500 thermal cycles of 58C to 558C with a 30-second dwell time). The Weibull modulus (m) and characteristic stress (g) were calculated, and a contour plot was used (m vs g) to detect differences between groups (95% two-sided confidence intervals). Significantly higher characteristic stress was observed for LUi (286.6 MPa) and Z350i (248.8 MPa) compared to the bulk-fill groups (FBFi=187.9 MPa, FBFFi=175.9 MPa, TBFi=149.9 MPa), with no differences between LUi and Z350i. Thermocycling significantly decreased the characteristic stress of all groups with the highest values observed for LUa (186.7 MPa) and Z350a (188.9 MPa) and the lowest for FBFFa (90.3 MPa). Intermediate values were observed for FBFa (151.6 MPa) and TBFa (122.8 MPa). The Weibull modulus decreased only for FBFa compared to FBFi. Composition and thermocycling significantly influenced the biaxial flexural strength of resin composite materials.

UR - http://www.scopus.com/inward/record.url?scp=85071715073&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85071715073&partnerID=8YFLogxK

U2 - 10.2341/18-146-L

DO - 10.2341/18-146-L

M3 - Article

C2 - 31172874

AN - SCOPUS:85071715073

VL - 44

SP - E254-E262

JO - Operative Dentistry

JF - Operative Dentistry

SN - 0361-7734

IS - 5

ER -