Effect of 2% iodine disinfecting solution on bond strength to dentin

Nelson Renato Franca Alves Da Silva, Christine S. Calamia, Paulo Coelho, Marcela Rocha De Oliveira Carrilho, Ricardo Marins De Carvalho, Page Caufield, P. Van Thompson

Research output: Contribution to journalArticle

Abstract

Introduction: Disinfection of dentin surfaces is desirable so long as it does not interfere with subsequent bonding of adhesive resins. Objective: To test the null hypothesis that bond strengths to dentin are not affected by previous application of an iodine disinfecting solution. Materials and Methods: Twenty-four extracted non-carious molars were selected. Occlusal enamel was removed producing a flat dentin substrate. Test teeth were all treated with 2% Iodine disclosing/disinfecting solution (I2DDS) for 20 sec and rinsed for 20 sec followed by the application of self- or total- etching bonding systems, generating five adhesive groups (n=3): Single Bond; ; Prime & Bond NT; Clearfil SE Bond; Opti-Bond Plus. The control groups (n=3 per adhesive) had no disclosing/disinfectant application prior to adhesive application. A 4-mm thick resin restoration was built up on each tooth for microtensile testing. Statistical analyses between experimental and control groups were performed by student's t-test (α= 0.05). Results: In general, experimental groups (previously treated with I2DDS) showed significantly lower bond strength values when compared with their respective controls (p<0.05), except for group Prime &Bond I2 that did not significantly differ from its control (p>0.05). Conclusion: Acetone-base adhesive systems seem not to be affected by the application of I2DDS prior to etching and bonding procedures.

Original languageEnglish (US)
Pages (from-to)399-404
Number of pages6
JournalJournal of Applied Oral Science
Volume14
Issue number6
DOIs
StatePublished - Nov 2006

Fingerprint

Dentin
Iodine
Adhesives
Tooth
Control Groups
Disinfectants
Disinfection
Dental Enamel
Acetone
Students

Keywords

  • Dentin
  • Dentin sensitivity
  • Dentin-bonding agents
  • Iodine

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Da Silva, N. R. F. A., Calamia, C. S., Coelho, P., Carrilho, M. R. D. O., De Carvalho, R. M., Caufield, P., & Thompson, P. V. (2006). Effect of 2% iodine disinfecting solution on bond strength to dentin. Journal of Applied Oral Science, 14(6), 399-404. https://doi.org/10.1590/S1678-77572006000600003

Effect of 2% iodine disinfecting solution on bond strength to dentin. / Da Silva, Nelson Renato Franca Alves; Calamia, Christine S.; Coelho, Paulo; Carrilho, Marcela Rocha De Oliveira; De Carvalho, Ricardo Marins; Caufield, Page; Thompson, P. Van.

In: Journal of Applied Oral Science, Vol. 14, No. 6, 11.2006, p. 399-404.

Research output: Contribution to journalArticle

Da Silva, NRFA, Calamia, CS, Coelho, P, Carrilho, MRDO, De Carvalho, RM, Caufield, P & Thompson, PV 2006, 'Effect of 2% iodine disinfecting solution on bond strength to dentin', Journal of Applied Oral Science, vol. 14, no. 6, pp. 399-404. https://doi.org/10.1590/S1678-77572006000600003
Da Silva NRFA, Calamia CS, Coelho P, Carrilho MRDO, De Carvalho RM, Caufield P et al. Effect of 2% iodine disinfecting solution on bond strength to dentin. Journal of Applied Oral Science. 2006 Nov;14(6):399-404. https://doi.org/10.1590/S1678-77572006000600003
Da Silva, Nelson Renato Franca Alves ; Calamia, Christine S. ; Coelho, Paulo ; Carrilho, Marcela Rocha De Oliveira ; De Carvalho, Ricardo Marins ; Caufield, Page ; Thompson, P. Van. / Effect of 2% iodine disinfecting solution on bond strength to dentin. In: Journal of Applied Oral Science. 2006 ; Vol. 14, No. 6. pp. 399-404.
@article{e8af8b2aa7774a10b860cde0fadcb6a1,
title = "Effect of 2{\%} iodine disinfecting solution on bond strength to dentin",
abstract = "Introduction: Disinfection of dentin surfaces is desirable so long as it does not interfere with subsequent bonding of adhesive resins. Objective: To test the null hypothesis that bond strengths to dentin are not affected by previous application of an iodine disinfecting solution. Materials and Methods: Twenty-four extracted non-carious molars were selected. Occlusal enamel was removed producing a flat dentin substrate. Test teeth were all treated with 2{\%} Iodine disclosing/disinfecting solution (I2DDS) for 20 sec and rinsed for 20 sec followed by the application of self- or total- etching bonding systems, generating five adhesive groups (n=3): Single Bond; ; Prime & Bond NT; Clearfil SE Bond; Opti-Bond Plus. The control groups (n=3 per adhesive) had no disclosing/disinfectant application prior to adhesive application. A 4-mm thick resin restoration was built up on each tooth for microtensile testing. Statistical analyses between experimental and control groups were performed by student's t-test (α= 0.05). Results: In general, experimental groups (previously treated with I2DDS) showed significantly lower bond strength values when compared with their respective controls (p<0.05), except for group Prime &Bond I2 that did not significantly differ from its control (p>0.05). Conclusion: Acetone-base adhesive systems seem not to be affected by the application of I2DDS prior to etching and bonding procedures.",
keywords = "Dentin, Dentin sensitivity, Dentin-bonding agents, Iodine",
author = "{Da Silva}, {Nelson Renato Franca Alves} and Calamia, {Christine S.} and Paulo Coelho and Carrilho, {Marcela Rocha De Oliveira} and {De Carvalho}, {Ricardo Marins} and Page Caufield and Thompson, {P. Van}",
year = "2006",
month = "11",
doi = "10.1590/S1678-77572006000600003",
language = "English (US)",
volume = "14",
pages = "399--404",
journal = "Journal of Applied Oral Science",
issn = "1678-7757",
publisher = "Faculdade de Odontologia de Bauru",
number = "6",

}

TY - JOUR

T1 - Effect of 2% iodine disinfecting solution on bond strength to dentin

AU - Da Silva, Nelson Renato Franca Alves

AU - Calamia, Christine S.

AU - Coelho, Paulo

AU - Carrilho, Marcela Rocha De Oliveira

AU - De Carvalho, Ricardo Marins

AU - Caufield, Page

AU - Thompson, P. Van

PY - 2006/11

Y1 - 2006/11

N2 - Introduction: Disinfection of dentin surfaces is desirable so long as it does not interfere with subsequent bonding of adhesive resins. Objective: To test the null hypothesis that bond strengths to dentin are not affected by previous application of an iodine disinfecting solution. Materials and Methods: Twenty-four extracted non-carious molars were selected. Occlusal enamel was removed producing a flat dentin substrate. Test teeth were all treated with 2% Iodine disclosing/disinfecting solution (I2DDS) for 20 sec and rinsed for 20 sec followed by the application of self- or total- etching bonding systems, generating five adhesive groups (n=3): Single Bond; ; Prime & Bond NT; Clearfil SE Bond; Opti-Bond Plus. The control groups (n=3 per adhesive) had no disclosing/disinfectant application prior to adhesive application. A 4-mm thick resin restoration was built up on each tooth for microtensile testing. Statistical analyses between experimental and control groups were performed by student's t-test (α= 0.05). Results: In general, experimental groups (previously treated with I2DDS) showed significantly lower bond strength values when compared with their respective controls (p<0.05), except for group Prime &Bond I2 that did not significantly differ from its control (p>0.05). Conclusion: Acetone-base adhesive systems seem not to be affected by the application of I2DDS prior to etching and bonding procedures.

AB - Introduction: Disinfection of dentin surfaces is desirable so long as it does not interfere with subsequent bonding of adhesive resins. Objective: To test the null hypothesis that bond strengths to dentin are not affected by previous application of an iodine disinfecting solution. Materials and Methods: Twenty-four extracted non-carious molars were selected. Occlusal enamel was removed producing a flat dentin substrate. Test teeth were all treated with 2% Iodine disclosing/disinfecting solution (I2DDS) for 20 sec and rinsed for 20 sec followed by the application of self- or total- etching bonding systems, generating five adhesive groups (n=3): Single Bond; ; Prime & Bond NT; Clearfil SE Bond; Opti-Bond Plus. The control groups (n=3 per adhesive) had no disclosing/disinfectant application prior to adhesive application. A 4-mm thick resin restoration was built up on each tooth for microtensile testing. Statistical analyses between experimental and control groups were performed by student's t-test (α= 0.05). Results: In general, experimental groups (previously treated with I2DDS) showed significantly lower bond strength values when compared with their respective controls (p<0.05), except for group Prime &Bond I2 that did not significantly differ from its control (p>0.05). Conclusion: Acetone-base adhesive systems seem not to be affected by the application of I2DDS prior to etching and bonding procedures.

KW - Dentin

KW - Dentin sensitivity

KW - Dentin-bonding agents

KW - Iodine

UR - http://www.scopus.com/inward/record.url?scp=33847046037&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847046037&partnerID=8YFLogxK

U2 - 10.1590/S1678-77572006000600003

DO - 10.1590/S1678-77572006000600003

M3 - Article

VL - 14

SP - 399

EP - 404

JO - Journal of Applied Oral Science

JF - Journal of Applied Oral Science

SN - 1678-7757

IS - 6

ER -