Dynamic motion generation for redundant systems under external constraints

Joo Hyun Kim, Karim Abdel-Malek, Yujiang Xiang, Jingzhou Yang, Jasbir S. Arora

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Dynamics of mechanical systems during motion usually involves reaction forces and moments due to the interaction with external objects or constraints from the environment. The problem of predicting the external reaction loads under rigid-body assumption has not been addressed extensively in the literature in terms of optimal motion planning and simulation. In this presentation, we propose a formulation of determining the external reaction loads for redundant systems motion planning. For dynamic equilibrium, the resultant reaction loads that include the effects of inertia, gravity, and general applied loads, are distributed to each contact points. Unknown reactions are determined along with the system configuration at each time step using iterative nonlinear optimization algorithm. The required actuator torques as well as the motion trajectories are obtained while satisfying given constraints. The formulation is applied to several example motions of multi-rigid-body systems such as a simple 3-degree-of-freedom welding manipulator and a highly articulated whole-body human mechanism. The example results are compared with the cases where the reactions are pre-assigned. The proposed formulation demonstrates realistic distribution of external reaction loads and the associated goal-oriented motions that are dynamically consistent.

Original languageEnglish (US)
Title of host publicationASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010
Pages1539-1546
Number of pages8
Volume2
EditionPARTS A AND B
DOIs
StatePublished - 2010
EventASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010 - Montreal, QC, Canada
Duration: Aug 15 2010Aug 18 2010

Other

OtherASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010
CountryCanada
CityMontreal, QC
Period8/15/108/18/10

Fingerprint

Redundant System
Motion planning
Motion
Point contacts
Manipulators
Gravitation
Welding
Actuators
Torque
Trajectories
Motion Planning
Rigid Body
Formulation
Motion Simulation
Manipulator
Nonlinear Optimization
Mechanical Systems
Inertia
Actuator
Optimization Algorithm

Keywords

  • Dynamics
  • External reaction
  • Motion planning
  • Optimization
  • Redundant system

ASJC Scopus subject areas

  • Mechanical Engineering
  • Computer Graphics and Computer-Aided Design
  • Computer Science Applications
  • Modeling and Simulation

Cite this

Kim, J. H., Abdel-Malek, K., Xiang, Y., Yang, J., & Arora, J. S. (2010). Dynamic motion generation for redundant systems under external constraints. In ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010 (PARTS A AND B ed., Vol. 2, pp. 1539-1546) https://doi.org/10.1115/DETC2010-28518

Dynamic motion generation for redundant systems under external constraints. / Kim, Joo Hyun; Abdel-Malek, Karim; Xiang, Yujiang; Yang, Jingzhou; Arora, Jasbir S.

ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. Vol. 2 PARTS A AND B. ed. 2010. p. 1539-1546.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kim, JH, Abdel-Malek, K, Xiang, Y, Yang, J & Arora, JS 2010, Dynamic motion generation for redundant systems under external constraints. in ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B edn, vol. 2, pp. 1539-1546, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010, Montreal, QC, Canada, 8/15/10. https://doi.org/10.1115/DETC2010-28518
Kim JH, Abdel-Malek K, Xiang Y, Yang J, Arora JS. Dynamic motion generation for redundant systems under external constraints. In ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B ed. Vol. 2. 2010. p. 1539-1546 https://doi.org/10.1115/DETC2010-28518
Kim, Joo Hyun ; Abdel-Malek, Karim ; Xiang, Yujiang ; Yang, Jingzhou ; Arora, Jasbir S. / Dynamic motion generation for redundant systems under external constraints. ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. Vol. 2 PARTS A AND B. ed. 2010. pp. 1539-1546
@inproceedings{5f0a3f5e37bc40efb23d97c9caee2583,
title = "Dynamic motion generation for redundant systems under external constraints",
abstract = "Dynamics of mechanical systems during motion usually involves reaction forces and moments due to the interaction with external objects or constraints from the environment. The problem of predicting the external reaction loads under rigid-body assumption has not been addressed extensively in the literature in terms of optimal motion planning and simulation. In this presentation, we propose a formulation of determining the external reaction loads for redundant systems motion planning. For dynamic equilibrium, the resultant reaction loads that include the effects of inertia, gravity, and general applied loads, are distributed to each contact points. Unknown reactions are determined along with the system configuration at each time step using iterative nonlinear optimization algorithm. The required actuator torques as well as the motion trajectories are obtained while satisfying given constraints. The formulation is applied to several example motions of multi-rigid-body systems such as a simple 3-degree-of-freedom welding manipulator and a highly articulated whole-body human mechanism. The example results are compared with the cases where the reactions are pre-assigned. The proposed formulation demonstrates realistic distribution of external reaction loads and the associated goal-oriented motions that are dynamically consistent.",
keywords = "Dynamics, External reaction, Motion planning, Optimization, Redundant system",
author = "Kim, {Joo Hyun} and Karim Abdel-Malek and Yujiang Xiang and Jingzhou Yang and Arora, {Jasbir S.}",
year = "2010",
doi = "10.1115/DETC2010-28518",
language = "English (US)",
isbn = "9780791844106",
volume = "2",
pages = "1539--1546",
booktitle = "ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010",
edition = "PARTS A AND B",

}

TY - GEN

T1 - Dynamic motion generation for redundant systems under external constraints

AU - Kim, Joo Hyun

AU - Abdel-Malek, Karim

AU - Xiang, Yujiang

AU - Yang, Jingzhou

AU - Arora, Jasbir S.

PY - 2010

Y1 - 2010

N2 - Dynamics of mechanical systems during motion usually involves reaction forces and moments due to the interaction with external objects or constraints from the environment. The problem of predicting the external reaction loads under rigid-body assumption has not been addressed extensively in the literature in terms of optimal motion planning and simulation. In this presentation, we propose a formulation of determining the external reaction loads for redundant systems motion planning. For dynamic equilibrium, the resultant reaction loads that include the effects of inertia, gravity, and general applied loads, are distributed to each contact points. Unknown reactions are determined along with the system configuration at each time step using iterative nonlinear optimization algorithm. The required actuator torques as well as the motion trajectories are obtained while satisfying given constraints. The formulation is applied to several example motions of multi-rigid-body systems such as a simple 3-degree-of-freedom welding manipulator and a highly articulated whole-body human mechanism. The example results are compared with the cases where the reactions are pre-assigned. The proposed formulation demonstrates realistic distribution of external reaction loads and the associated goal-oriented motions that are dynamically consistent.

AB - Dynamics of mechanical systems during motion usually involves reaction forces and moments due to the interaction with external objects or constraints from the environment. The problem of predicting the external reaction loads under rigid-body assumption has not been addressed extensively in the literature in terms of optimal motion planning and simulation. In this presentation, we propose a formulation of determining the external reaction loads for redundant systems motion planning. For dynamic equilibrium, the resultant reaction loads that include the effects of inertia, gravity, and general applied loads, are distributed to each contact points. Unknown reactions are determined along with the system configuration at each time step using iterative nonlinear optimization algorithm. The required actuator torques as well as the motion trajectories are obtained while satisfying given constraints. The formulation is applied to several example motions of multi-rigid-body systems such as a simple 3-degree-of-freedom welding manipulator and a highly articulated whole-body human mechanism. The example results are compared with the cases where the reactions are pre-assigned. The proposed formulation demonstrates realistic distribution of external reaction loads and the associated goal-oriented motions that are dynamically consistent.

KW - Dynamics

KW - External reaction

KW - Motion planning

KW - Optimization

KW - Redundant system

UR - http://www.scopus.com/inward/record.url?scp=80055018745&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80055018745&partnerID=8YFLogxK

U2 - 10.1115/DETC2010-28518

DO - 10.1115/DETC2010-28518

M3 - Conference contribution

SN - 9780791844106

VL - 2

SP - 1539

EP - 1546

BT - ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010

ER -