Disposable polydimethylsiloxane/silicon hybrid chips for protein detection

Shifeng Li, David Fozdar, Dongbing Shao, Shaochen Chen, Pierre N. Floriane, Nicolaos Christodoulides, Mehnaaz F. Ali, Priya Dharshan, John McDevitt, Dean Neikirk

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper presents disposable protein analysis chips with single and multiple chambers - constructed from poly (dimethylsiloxane) (PDMS) and silicon. The chips are composed of a multilayer stack of PDMS layers that sandwich a silicon microchip. This inner silicon chip features an etched array of microcavities hosting agarose beads. The sample is introduced into the fluid network in the top PDMS layer where it is directed to the bead chamber. After reaction of the analyte with the probe beads, signal generated on the beads is captured with a CCD camera, digitally processed, and analyzed. An established bead-based fluorescent assay for C-reactive protein (CRP) was used here to characterize these hybrid chips. The detection limit of the single chamber protein chip was found to be Ing/mL. Additionally, using the back pressure compensation method, the signals from each of the four-chamber chip were found to be within 10% of each other. Moreover, the fabrication of the multiple-chamber chip may increase throughput and multiplex assay capacity.

Original languageEnglish (US)
Title of host publicationAmerican Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS
PublisherAmerican Society of Mechanical Engineers (ASME)
Pages331-337
Number of pages7
DOIs
StatePublished - 2004
Event2004 ASME INternational Mechanical Engineering Congress and Exposition, IMECE - Anaheim, CA, United States
Duration: Nov 13 2004Nov 19 2004

Other

Other2004 ASME INternational Mechanical Engineering Congress and Exposition, IMECE
CountryUnited States
CityAnaheim, CA
Period11/13/0411/19/04

Fingerprint

Polydimethylsiloxane
Proteins
Silicon
Assays
Microcavities
CCD cameras
Multilayers
Throughput
Fabrication
Fluids

Keywords

  • Assay
  • C-reactive protein
  • Disposable
  • Poly (dimethylsiloxane)

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Li, S., Fozdar, D., Shao, D., Chen, S., Floriane, P. N., Christodoulides, N., ... Neikirk, D. (2004). Disposable polydimethylsiloxane/silicon hybrid chips for protein detection. In American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS (pp. 331-337). [IMECE2004-62170] American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2004-62170

Disposable polydimethylsiloxane/silicon hybrid chips for protein detection. / Li, Shifeng; Fozdar, David; Shao, Dongbing; Chen, Shaochen; Floriane, Pierre N.; Christodoulides, Nicolaos; Ali, Mehnaaz F.; Dharshan, Priya; McDevitt, John; Neikirk, Dean.

American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS. American Society of Mechanical Engineers (ASME), 2004. p. 331-337 IMECE2004-62170.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Li, S, Fozdar, D, Shao, D, Chen, S, Floriane, PN, Christodoulides, N, Ali, MF, Dharshan, P, McDevitt, J & Neikirk, D 2004, Disposable polydimethylsiloxane/silicon hybrid chips for protein detection. in American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS., IMECE2004-62170, American Society of Mechanical Engineers (ASME), pp. 331-337, 2004 ASME INternational Mechanical Engineering Congress and Exposition, IMECE, Anaheim, CA, United States, 11/13/04. https://doi.org/10.1115/IMECE2004-62170
Li S, Fozdar D, Shao D, Chen S, Floriane PN, Christodoulides N et al. Disposable polydimethylsiloxane/silicon hybrid chips for protein detection. In American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS. American Society of Mechanical Engineers (ASME). 2004. p. 331-337. IMECE2004-62170 https://doi.org/10.1115/IMECE2004-62170
Li, Shifeng ; Fozdar, David ; Shao, Dongbing ; Chen, Shaochen ; Floriane, Pierre N. ; Christodoulides, Nicolaos ; Ali, Mehnaaz F. ; Dharshan, Priya ; McDevitt, John ; Neikirk, Dean. / Disposable polydimethylsiloxane/silicon hybrid chips for protein detection. American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS. American Society of Mechanical Engineers (ASME), 2004. pp. 331-337
@inproceedings{63eef7036f1d4c03937c185d0c17f661,
title = "Disposable polydimethylsiloxane/silicon hybrid chips for protein detection",
abstract = "This paper presents disposable protein analysis chips with single and multiple chambers - constructed from poly (dimethylsiloxane) (PDMS) and silicon. The chips are composed of a multilayer stack of PDMS layers that sandwich a silicon microchip. This inner silicon chip features an etched array of microcavities hosting agarose beads. The sample is introduced into the fluid network in the top PDMS layer where it is directed to the bead chamber. After reaction of the analyte with the probe beads, signal generated on the beads is captured with a CCD camera, digitally processed, and analyzed. An established bead-based fluorescent assay for C-reactive protein (CRP) was used here to characterize these hybrid chips. The detection limit of the single chamber protein chip was found to be Ing/mL. Additionally, using the back pressure compensation method, the signals from each of the four-chamber chip were found to be within 10{\%} of each other. Moreover, the fabrication of the multiple-chamber chip may increase throughput and multiplex assay capacity.",
keywords = "Assay, C-reactive protein, Disposable, Poly (dimethylsiloxane)",
author = "Shifeng Li and David Fozdar and Dongbing Shao and Shaochen Chen and Floriane, {Pierre N.} and Nicolaos Christodoulides and Ali, {Mehnaaz F.} and Priya Dharshan and John McDevitt and Dean Neikirk",
year = "2004",
doi = "10.1115/IMECE2004-62170",
language = "English (US)",
pages = "331--337",
booktitle = "American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS",
publisher = "American Society of Mechanical Engineers (ASME)",

}

TY - GEN

T1 - Disposable polydimethylsiloxane/silicon hybrid chips for protein detection

AU - Li, Shifeng

AU - Fozdar, David

AU - Shao, Dongbing

AU - Chen, Shaochen

AU - Floriane, Pierre N.

AU - Christodoulides, Nicolaos

AU - Ali, Mehnaaz F.

AU - Dharshan, Priya

AU - McDevitt, John

AU - Neikirk, Dean

PY - 2004

Y1 - 2004

N2 - This paper presents disposable protein analysis chips with single and multiple chambers - constructed from poly (dimethylsiloxane) (PDMS) and silicon. The chips are composed of a multilayer stack of PDMS layers that sandwich a silicon microchip. This inner silicon chip features an etched array of microcavities hosting agarose beads. The sample is introduced into the fluid network in the top PDMS layer where it is directed to the bead chamber. After reaction of the analyte with the probe beads, signal generated on the beads is captured with a CCD camera, digitally processed, and analyzed. An established bead-based fluorescent assay for C-reactive protein (CRP) was used here to characterize these hybrid chips. The detection limit of the single chamber protein chip was found to be Ing/mL. Additionally, using the back pressure compensation method, the signals from each of the four-chamber chip were found to be within 10% of each other. Moreover, the fabrication of the multiple-chamber chip may increase throughput and multiplex assay capacity.

AB - This paper presents disposable protein analysis chips with single and multiple chambers - constructed from poly (dimethylsiloxane) (PDMS) and silicon. The chips are composed of a multilayer stack of PDMS layers that sandwich a silicon microchip. This inner silicon chip features an etched array of microcavities hosting agarose beads. The sample is introduced into the fluid network in the top PDMS layer where it is directed to the bead chamber. After reaction of the analyte with the probe beads, signal generated on the beads is captured with a CCD camera, digitally processed, and analyzed. An established bead-based fluorescent assay for C-reactive protein (CRP) was used here to characterize these hybrid chips. The detection limit of the single chamber protein chip was found to be Ing/mL. Additionally, using the back pressure compensation method, the signals from each of the four-chamber chip were found to be within 10% of each other. Moreover, the fabrication of the multiple-chamber chip may increase throughput and multiplex assay capacity.

KW - Assay

KW - C-reactive protein

KW - Disposable

KW - Poly (dimethylsiloxane)

UR - http://www.scopus.com/inward/record.url?scp=21644473757&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=21644473757&partnerID=8YFLogxK

U2 - 10.1115/IMECE2004-62170

DO - 10.1115/IMECE2004-62170

M3 - Conference contribution

AN - SCOPUS:21644473757

SP - 331

EP - 337

BT - American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS

PB - American Society of Mechanical Engineers (ASME)

ER -