Development of lightweight composites with low coefficient of thermal expansion

V. C. Shunmugasamy, D. Pinisetty, Nikhil Gupta

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Lightweight structural composites are finding applications in aerospace structures, deep sea pipe insulation and electronic packaging. In most of these applications, coefficient of thermal expansion (CTE) gains attention for either increased dimensional stability during service conditions or reducing thermal stresses at interfaces. Development of new composites with controlled CTE is highly desired. In the present study, hollow micro-particle (microballoon) filled vinyl ester matrix composites, referred to as syntactic foams, are evaluated for CTE. To analyze the effect of wall thickness and volume fraction of microballoons, study was conducted on six different types of syntactic foams containing three different microballoon densities, namely 220, 320 and 460 kg/m3, in two different volume fractions (?=0.3 and 0.6). The addition of glass microballoons enhanced dimensional stability of the composite by resulting in a reduction of the CTE by up to 60.4% in comparison to the neat vinyl ester resin. The experimental results revealed decrease in the CTE values with increase in ?. The effect of ? on the CTE of syntactic foams was stronger than that of the microballoon wall thickness. Theoretical predictions of CTE were obtained by using Turner's model which was modified by accounting the effect of microballoon wall thickness. The theoretical results closely matched with experimental results showing a maximum difference of ±15%. The results of this study can be helpful in designing composites for applications requiring precise control over their thermal expansion properties.

Original languageEnglish (US)
Title of host publication27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting
Pages1152-1163
Number of pages12
StatePublished - 2012
Event27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting - Arlington, TX, United States
Duration: Oct 1 2012Oct 3 2012

Other

Other27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting
CountryUnited States
CityArlington, TX
Period10/1/1210/3/12

Fingerprint

Thermal expansion
Composite materials
Syntactics
Foams
Dimensional stability
Volume fraction
Esters
Electronics packaging
Thermal stress
Insulation
Resins
Pipe
Glass

ASJC Scopus subject areas

  • Ceramics and Composites
  • Materials Chemistry

Cite this

Shunmugasamy, V. C., Pinisetty, D., & Gupta, N. (2012). Development of lightweight composites with low coefficient of thermal expansion. In 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting (pp. 1152-1163)

Development of lightweight composites with low coefficient of thermal expansion. / Shunmugasamy, V. C.; Pinisetty, D.; Gupta, Nikhil.

27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting. 2012. p. 1152-1163.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shunmugasamy, VC, Pinisetty, D & Gupta, N 2012, Development of lightweight composites with low coefficient of thermal expansion. in 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting. pp. 1152-1163, 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting, Arlington, TX, United States, 10/1/12.
Shunmugasamy VC, Pinisetty D, Gupta N. Development of lightweight composites with low coefficient of thermal expansion. In 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting. 2012. p. 1152-1163
Shunmugasamy, V. C. ; Pinisetty, D. ; Gupta, Nikhil. / Development of lightweight composites with low coefficient of thermal expansion. 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting. 2012. pp. 1152-1163
@inproceedings{7660aa254a7442acaaa9c4626bfb3ff3,
title = "Development of lightweight composites with low coefficient of thermal expansion",
abstract = "Lightweight structural composites are finding applications in aerospace structures, deep sea pipe insulation and electronic packaging. In most of these applications, coefficient of thermal expansion (CTE) gains attention for either increased dimensional stability during service conditions or reducing thermal stresses at interfaces. Development of new composites with controlled CTE is highly desired. In the present study, hollow micro-particle (microballoon) filled vinyl ester matrix composites, referred to as syntactic foams, are evaluated for CTE. To analyze the effect of wall thickness and volume fraction of microballoons, study was conducted on six different types of syntactic foams containing three different microballoon densities, namely 220, 320 and 460 kg/m3, in two different volume fractions (?=0.3 and 0.6). The addition of glass microballoons enhanced dimensional stability of the composite by resulting in a reduction of the CTE by up to 60.4{\%} in comparison to the neat vinyl ester resin. The experimental results revealed decrease in the CTE values with increase in ?. The effect of ? on the CTE of syntactic foams was stronger than that of the microballoon wall thickness. Theoretical predictions of CTE were obtained by using Turner's model which was modified by accounting the effect of microballoon wall thickness. The theoretical results closely matched with experimental results showing a maximum difference of ±15{\%}. The results of this study can be helpful in designing composites for applications requiring precise control over their thermal expansion properties.",
author = "Shunmugasamy, {V. C.} and D. Pinisetty and Nikhil Gupta",
year = "2012",
language = "English (US)",
isbn = "9781622764389",
pages = "1152--1163",
booktitle = "27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting",

}

TY - GEN

T1 - Development of lightweight composites with low coefficient of thermal expansion

AU - Shunmugasamy, V. C.

AU - Pinisetty, D.

AU - Gupta, Nikhil

PY - 2012

Y1 - 2012

N2 - Lightweight structural composites are finding applications in aerospace structures, deep sea pipe insulation and electronic packaging. In most of these applications, coefficient of thermal expansion (CTE) gains attention for either increased dimensional stability during service conditions or reducing thermal stresses at interfaces. Development of new composites with controlled CTE is highly desired. In the present study, hollow micro-particle (microballoon) filled vinyl ester matrix composites, referred to as syntactic foams, are evaluated for CTE. To analyze the effect of wall thickness and volume fraction of microballoons, study was conducted on six different types of syntactic foams containing three different microballoon densities, namely 220, 320 and 460 kg/m3, in two different volume fractions (?=0.3 and 0.6). The addition of glass microballoons enhanced dimensional stability of the composite by resulting in a reduction of the CTE by up to 60.4% in comparison to the neat vinyl ester resin. The experimental results revealed decrease in the CTE values with increase in ?. The effect of ? on the CTE of syntactic foams was stronger than that of the microballoon wall thickness. Theoretical predictions of CTE were obtained by using Turner's model which was modified by accounting the effect of microballoon wall thickness. The theoretical results closely matched with experimental results showing a maximum difference of ±15%. The results of this study can be helpful in designing composites for applications requiring precise control over their thermal expansion properties.

AB - Lightweight structural composites are finding applications in aerospace structures, deep sea pipe insulation and electronic packaging. In most of these applications, coefficient of thermal expansion (CTE) gains attention for either increased dimensional stability during service conditions or reducing thermal stresses at interfaces. Development of new composites with controlled CTE is highly desired. In the present study, hollow micro-particle (microballoon) filled vinyl ester matrix composites, referred to as syntactic foams, are evaluated for CTE. To analyze the effect of wall thickness and volume fraction of microballoons, study was conducted on six different types of syntactic foams containing three different microballoon densities, namely 220, 320 and 460 kg/m3, in two different volume fractions (?=0.3 and 0.6). The addition of glass microballoons enhanced dimensional stability of the composite by resulting in a reduction of the CTE by up to 60.4% in comparison to the neat vinyl ester resin. The experimental results revealed decrease in the CTE values with increase in ?. The effect of ? on the CTE of syntactic foams was stronger than that of the microballoon wall thickness. Theoretical predictions of CTE were obtained by using Turner's model which was modified by accounting the effect of microballoon wall thickness. The theoretical results closely matched with experimental results showing a maximum difference of ±15%. The results of this study can be helpful in designing composites for applications requiring precise control over their thermal expansion properties.

UR - http://www.scopus.com/inward/record.url?scp=84874477175&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874477175&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9781622764389

SP - 1152

EP - 1163

BT - 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting

ER -