Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates

Dung D. Luong, Oliver M. Strbik, Vincent H. Hammond, Nikhil Gupta, Kyu Cho

Research output: Contribution to journalArticle

Abstract

Aluminum alloy A356 filled with silicon carbide hollow spheres (SiC HS) is investigated for quasi-static (10-3 s-1) and high strain rate (up to 1520 s-1) compressive properties. Such closed cell composite foams, called syntactic foams, are of interest in weight sensitive structural applications. The present work is focused on understanding the compressive failure mechanism and relating them with the material microstructure. The compressive and plateau strengths of syntactic foams with SiCHS are found to be 163 and 110 MPa, respectively. The measured properties are considerably higher than the existing fly ash cenosphere filled aluminum matrix syntactic foams. Compressive failure mechanisms are studied for A356/SiCHS syntactic foams and direct evidence of hollow sphere crushing at the end of the elastic regions is obtained. The predictions of compressive strength obtained from an existing model are validated with the experimental results. Extensive analysis of data on open and closed cell foams containing gas porosity and syntactic foams is presented. A clear advantage in terms of low density and high yield strength is observed in A356/SiC HS syntactic foams compared to other foams. Yield strength of aluminum foams may be different at high strain rate compression compared to quasi-static values but most of the foams do not show strong evidence of strain rate sensitivity within the high strain rate regime.

Original languageEnglish (US)
Pages (from-to)412-422
Number of pages11
JournalJournal of Alloys and Compounds
Volume550
DOIs
StatePublished - Feb 15 2013

Fingerprint

Syntactics
Foams
Strain rate
Aluminum alloys
Aluminum
Silicon carbide
Yield stress
Coal Ash
Crushing
Fly ash
Compressive strength
Compaction
Porosity
Gases
Microstructure

Keywords

  • Mechanical properties
  • Metal-matrix composites (MMCs)
  • Metallography
  • Porosity

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Chemistry
  • Metals and Alloys

Cite this

Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates. / Luong, Dung D.; Strbik, Oliver M.; Hammond, Vincent H.; Gupta, Nikhil; Cho, Kyu.

In: Journal of Alloys and Compounds, Vol. 550, 15.02.2013, p. 412-422.

Research output: Contribution to journalArticle

@article{89d7529de42247b69214a19ff1689f91,
title = "Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates",
abstract = "Aluminum alloy A356 filled with silicon carbide hollow spheres (SiC HS) is investigated for quasi-static (10-3 s-1) and high strain rate (up to 1520 s-1) compressive properties. Such closed cell composite foams, called syntactic foams, are of interest in weight sensitive structural applications. The present work is focused on understanding the compressive failure mechanism and relating them with the material microstructure. The compressive and plateau strengths of syntactic foams with SiCHS are found to be 163 and 110 MPa, respectively. The measured properties are considerably higher than the existing fly ash cenosphere filled aluminum matrix syntactic foams. Compressive failure mechanisms are studied for A356/SiCHS syntactic foams and direct evidence of hollow sphere crushing at the end of the elastic regions is obtained. The predictions of compressive strength obtained from an existing model are validated with the experimental results. Extensive analysis of data on open and closed cell foams containing gas porosity and syntactic foams is presented. A clear advantage in terms of low density and high yield strength is observed in A356/SiC HS syntactic foams compared to other foams. Yield strength of aluminum foams may be different at high strain rate compression compared to quasi-static values but most of the foams do not show strong evidence of strain rate sensitivity within the high strain rate regime.",
keywords = "Mechanical properties, Metal-matrix composites (MMCs), Metallography, Porosity",
author = "Luong, {Dung D.} and Strbik, {Oliver M.} and Hammond, {Vincent H.} and Nikhil Gupta and Kyu Cho",
year = "2013",
month = "2",
day = "15",
doi = "10.1016/j.jallcom.2012.10.171",
language = "English (US)",
volume = "550",
pages = "412--422",
journal = "Journal of Alloys and Compounds",
issn = "0925-8388",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates

AU - Luong, Dung D.

AU - Strbik, Oliver M.

AU - Hammond, Vincent H.

AU - Gupta, Nikhil

AU - Cho, Kyu

PY - 2013/2/15

Y1 - 2013/2/15

N2 - Aluminum alloy A356 filled with silicon carbide hollow spheres (SiC HS) is investigated for quasi-static (10-3 s-1) and high strain rate (up to 1520 s-1) compressive properties. Such closed cell composite foams, called syntactic foams, are of interest in weight sensitive structural applications. The present work is focused on understanding the compressive failure mechanism and relating them with the material microstructure. The compressive and plateau strengths of syntactic foams with SiCHS are found to be 163 and 110 MPa, respectively. The measured properties are considerably higher than the existing fly ash cenosphere filled aluminum matrix syntactic foams. Compressive failure mechanisms are studied for A356/SiCHS syntactic foams and direct evidence of hollow sphere crushing at the end of the elastic regions is obtained. The predictions of compressive strength obtained from an existing model are validated with the experimental results. Extensive analysis of data on open and closed cell foams containing gas porosity and syntactic foams is presented. A clear advantage in terms of low density and high yield strength is observed in A356/SiC HS syntactic foams compared to other foams. Yield strength of aluminum foams may be different at high strain rate compression compared to quasi-static values but most of the foams do not show strong evidence of strain rate sensitivity within the high strain rate regime.

AB - Aluminum alloy A356 filled with silicon carbide hollow spheres (SiC HS) is investigated for quasi-static (10-3 s-1) and high strain rate (up to 1520 s-1) compressive properties. Such closed cell composite foams, called syntactic foams, are of interest in weight sensitive structural applications. The present work is focused on understanding the compressive failure mechanism and relating them with the material microstructure. The compressive and plateau strengths of syntactic foams with SiCHS are found to be 163 and 110 MPa, respectively. The measured properties are considerably higher than the existing fly ash cenosphere filled aluminum matrix syntactic foams. Compressive failure mechanisms are studied for A356/SiCHS syntactic foams and direct evidence of hollow sphere crushing at the end of the elastic regions is obtained. The predictions of compressive strength obtained from an existing model are validated with the experimental results. Extensive analysis of data on open and closed cell foams containing gas porosity and syntactic foams is presented. A clear advantage in terms of low density and high yield strength is observed in A356/SiC HS syntactic foams compared to other foams. Yield strength of aluminum foams may be different at high strain rate compression compared to quasi-static values but most of the foams do not show strong evidence of strain rate sensitivity within the high strain rate regime.

KW - Mechanical properties

KW - Metal-matrix composites (MMCs)

KW - Metallography

KW - Porosity

UR - http://www.scopus.com/inward/record.url?scp=84869861827&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84869861827&partnerID=8YFLogxK

U2 - 10.1016/j.jallcom.2012.10.171

DO - 10.1016/j.jallcom.2012.10.171

M3 - Article

VL - 550

SP - 412

EP - 422

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

SN - 0925-8388

ER -