Development of forward osmosis membranes modified by cross-linked layer by layer assembly for brackish water desalination

Wafa Suwaileh, Daniel Johnson, Saeed Khodabakhshi, Nidal Hilal

Research output: Contribution to journalArticle

Abstract

Membranes having high water flux and minimum reverse solute flux at low operating pressures are the ideal membranes for the forward osmosis (FO) process. In this work, we report the use of a LbL surface modification strategy to fabricate a novel positively charged FO membranes. The main purpose of this work was to fabricate an effective selective layer onto a commercial PES ultrafiltration membrane, which functioned as a support layer, to provide the best performance for treatment of brackish water by FO. The new membranes containing a mixing ratio of 0.1 MPDADMAC: 0.001 MCMCNa in the polyelectrolyte complex exhibited the best performance in terms of minimum reverse solute flux and acceptable water flux as compared to that for membranes containing a mixing ratio of 0.1 MPDADMAC: 0.01 MCMCNa. The improved performance and physicochemical properties of the new membranes were explored by various analytical techniques and were compared to the pristine membrane. Firstly, structural characterization revealed that the new selective layer was homogenous, uniform and strongly adhered to the substrate resulting in excellent water permeability and acceptable reverse solute flux. Secondly, it was found that the optimal curing temperature was 60 O C for 4 h that contributed to enhanced membrane performance. Lastly, the developed ranking protocol was adopted to optimize the membrane performance in terms of the water permeability coefficient (A) and solute permeability coefficient (B). According to this optimization procedure, the best performing membrane was membrane coated 2.5 bilayers which had water permeability and solute permeability coefficients of 23.1 L m −2 h −1 bar −1 and 1.54 L m −2 h −1 respectively.

Original languageEnglish (US)
Pages (from-to)267-277
Number of pages11
JournalJournal of Membrane Science
Volume583
DOIs
StatePublished - Aug 1 2019

Fingerprint

Osmosis
Osmosis membranes
osmosis
Desalination
assembly
membranes
Membranes
water
Water
Permeability
permeability
solutes
Fluxes
Hydraulic conductivity
mixing ratios
Saline Waters
coefficients
ranking
Ultrafiltration
Water Purification

Keywords

  • Forward osmosis
  • Layer by layer assembly
  • Modeling
  • Optimization
  • Polyelectrolyte complex
  • Surface modification

ASJC Scopus subject areas

  • Biochemistry
  • Materials Science(all)
  • Physical and Theoretical Chemistry
  • Filtration and Separation

Cite this

Development of forward osmosis membranes modified by cross-linked layer by layer assembly for brackish water desalination. / Suwaileh, Wafa; Johnson, Daniel; Khodabakhshi, Saeed; Hilal, Nidal.

In: Journal of Membrane Science, Vol. 583, 01.08.2019, p. 267-277.

Research output: Contribution to journalArticle

@article{7758947f198b4c4c8eb4ccdbe1654799,
title = "Development of forward osmosis membranes modified by cross-linked layer by layer assembly for brackish water desalination",
abstract = "Membranes having high water flux and minimum reverse solute flux at low operating pressures are the ideal membranes for the forward osmosis (FO) process. In this work, we report the use of a LbL surface modification strategy to fabricate a novel positively charged FO membranes. The main purpose of this work was to fabricate an effective selective layer onto a commercial PES ultrafiltration membrane, which functioned as a support layer, to provide the best performance for treatment of brackish water by FO. The new membranes containing a mixing ratio of 0.1 MPDADMAC: 0.001 MCMCNa in the polyelectrolyte complex exhibited the best performance in terms of minimum reverse solute flux and acceptable water flux as compared to that for membranes containing a mixing ratio of 0.1 MPDADMAC: 0.01 MCMCNa. The improved performance and physicochemical properties of the new membranes were explored by various analytical techniques and were compared to the pristine membrane. Firstly, structural characterization revealed that the new selective layer was homogenous, uniform and strongly adhered to the substrate resulting in excellent water permeability and acceptable reverse solute flux. Secondly, it was found that the optimal curing temperature was 60 O C for 4 h that contributed to enhanced membrane performance. Lastly, the developed ranking protocol was adopted to optimize the membrane performance in terms of the water permeability coefficient (A) and solute permeability coefficient (B). According to this optimization procedure, the best performing membrane was membrane coated 2.5 bilayers which had water permeability and solute permeability coefficients of 23.1 L m −2 h −1 bar −1 and 1.54 L m −2 h −1 respectively.",
keywords = "Forward osmosis, Layer by layer assembly, Modeling, Optimization, Polyelectrolyte complex, Surface modification",
author = "Wafa Suwaileh and Daniel Johnson and Saeed Khodabakhshi and Nidal Hilal",
year = "2019",
month = "8",
day = "1",
doi = "10.1016/j.memsci.2019.04.052",
language = "English (US)",
volume = "583",
pages = "267--277",
journal = "Jornal of Membrane Science",
issn = "0376-7388",
publisher = "Elsevier",

}

TY - JOUR

T1 - Development of forward osmosis membranes modified by cross-linked layer by layer assembly for brackish water desalination

AU - Suwaileh, Wafa

AU - Johnson, Daniel

AU - Khodabakhshi, Saeed

AU - Hilal, Nidal

PY - 2019/8/1

Y1 - 2019/8/1

N2 - Membranes having high water flux and minimum reverse solute flux at low operating pressures are the ideal membranes for the forward osmosis (FO) process. In this work, we report the use of a LbL surface modification strategy to fabricate a novel positively charged FO membranes. The main purpose of this work was to fabricate an effective selective layer onto a commercial PES ultrafiltration membrane, which functioned as a support layer, to provide the best performance for treatment of brackish water by FO. The new membranes containing a mixing ratio of 0.1 MPDADMAC: 0.001 MCMCNa in the polyelectrolyte complex exhibited the best performance in terms of minimum reverse solute flux and acceptable water flux as compared to that for membranes containing a mixing ratio of 0.1 MPDADMAC: 0.01 MCMCNa. The improved performance and physicochemical properties of the new membranes were explored by various analytical techniques and were compared to the pristine membrane. Firstly, structural characterization revealed that the new selective layer was homogenous, uniform and strongly adhered to the substrate resulting in excellent water permeability and acceptable reverse solute flux. Secondly, it was found that the optimal curing temperature was 60 O C for 4 h that contributed to enhanced membrane performance. Lastly, the developed ranking protocol was adopted to optimize the membrane performance in terms of the water permeability coefficient (A) and solute permeability coefficient (B). According to this optimization procedure, the best performing membrane was membrane coated 2.5 bilayers which had water permeability and solute permeability coefficients of 23.1 L m −2 h −1 bar −1 and 1.54 L m −2 h −1 respectively.

AB - Membranes having high water flux and minimum reverse solute flux at low operating pressures are the ideal membranes for the forward osmosis (FO) process. In this work, we report the use of a LbL surface modification strategy to fabricate a novel positively charged FO membranes. The main purpose of this work was to fabricate an effective selective layer onto a commercial PES ultrafiltration membrane, which functioned as a support layer, to provide the best performance for treatment of brackish water by FO. The new membranes containing a mixing ratio of 0.1 MPDADMAC: 0.001 MCMCNa in the polyelectrolyte complex exhibited the best performance in terms of minimum reverse solute flux and acceptable water flux as compared to that for membranes containing a mixing ratio of 0.1 MPDADMAC: 0.01 MCMCNa. The improved performance and physicochemical properties of the new membranes were explored by various analytical techniques and were compared to the pristine membrane. Firstly, structural characterization revealed that the new selective layer was homogenous, uniform and strongly adhered to the substrate resulting in excellent water permeability and acceptable reverse solute flux. Secondly, it was found that the optimal curing temperature was 60 O C for 4 h that contributed to enhanced membrane performance. Lastly, the developed ranking protocol was adopted to optimize the membrane performance in terms of the water permeability coefficient (A) and solute permeability coefficient (B). According to this optimization procedure, the best performing membrane was membrane coated 2.5 bilayers which had water permeability and solute permeability coefficients of 23.1 L m −2 h −1 bar −1 and 1.54 L m −2 h −1 respectively.

KW - Forward osmosis

KW - Layer by layer assembly

KW - Modeling

KW - Optimization

KW - Polyelectrolyte complex

KW - Surface modification

UR - http://www.scopus.com/inward/record.url?scp=85065059903&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85065059903&partnerID=8YFLogxK

U2 - 10.1016/j.memsci.2019.04.052

DO - 10.1016/j.memsci.2019.04.052

M3 - Article

AN - SCOPUS:85065059903

VL - 583

SP - 267

EP - 277

JO - Jornal of Membrane Science

JF - Jornal of Membrane Science

SN - 0376-7388

ER -