Design of a wireless charging system with a phase-controlled inverter under varying parameters

Qijun Deng, Jiangtao Liu, Dariusz Czarkowski, Mariusz Bojarski, Erdem Asa, Francisco De Leon

Research output: Contribution to journalArticle

Abstract

Class-D full bridge is the most common inverter topology at the primary side for wireless electric vehicles (EVs) charging systems. This study takes a novel topology of a phase-controlled inverter as the power amplifier and puts it in a context of the whole charging system. The proposed inverter topology regulates the charging power through adjusting the phase-shift angle among phases with a constant operating frequency, which alleviates the EMI filter design. For various wireless EVs chargers, the gaps between the primary side and the secondary side are changing, which results in various coupling factors k. The equivalent resistance of the EVs battery Rbattery is also changing during the charging process. Even resonant frequencies at two sides are variable because of the components tolerances and operating environments. This study presents design considerations of a wireless EVs charging system with the proposed technology under variable k, Rbattery, and resonant frequencies. Circuit parameters are designed and the system efficiency is derived. Industrial prototype of an EV charging system is manufactured with the proposed topology at 3.0 kW. Experiments show that these design considerations can reflect the system characteristics, and the proposed system is a good candidate to be used in wireless EV battery chargers.

Original languageEnglish (US)
Pages (from-to)2461-2470
Number of pages10
JournalIET Power Electronics
Volume9
Issue number13
DOIs
StatePublished - Oct 26 2016

Fingerprint

Electric vehicles
Topology
Natural frequencies
Power amplifiers
Phase shift
Networks (circuits)
Experiments
Battery electric vehicles

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Design of a wireless charging system with a phase-controlled inverter under varying parameters. / Deng, Qijun; Liu, Jiangtao; Czarkowski, Dariusz; Bojarski, Mariusz; Asa, Erdem; De Leon, Francisco.

In: IET Power Electronics, Vol. 9, No. 13, 26.10.2016, p. 2461-2470.

Research output: Contribution to journalArticle

Deng, Qijun ; Liu, Jiangtao ; Czarkowski, Dariusz ; Bojarski, Mariusz ; Asa, Erdem ; De Leon, Francisco. / Design of a wireless charging system with a phase-controlled inverter under varying parameters. In: IET Power Electronics. 2016 ; Vol. 9, No. 13. pp. 2461-2470.
@article{736870ab39244edca20f563ced02683f,
title = "Design of a wireless charging system with a phase-controlled inverter under varying parameters",
abstract = "Class-D full bridge is the most common inverter topology at the primary side for wireless electric vehicles (EVs) charging systems. This study takes a novel topology of a phase-controlled inverter as the power amplifier and puts it in a context of the whole charging system. The proposed inverter topology regulates the charging power through adjusting the phase-shift angle among phases with a constant operating frequency, which alleviates the EMI filter design. For various wireless EVs chargers, the gaps between the primary side and the secondary side are changing, which results in various coupling factors k. The equivalent resistance of the EVs battery Rbattery is also changing during the charging process. Even resonant frequencies at two sides are variable because of the components tolerances and operating environments. This study presents design considerations of a wireless EVs charging system with the proposed technology under variable k, Rbattery, and resonant frequencies. Circuit parameters are designed and the system efficiency is derived. Industrial prototype of an EV charging system is manufactured with the proposed topology at 3.0 kW. Experiments show that these design considerations can reflect the system characteristics, and the proposed system is a good candidate to be used in wireless EV battery chargers.",
author = "Qijun Deng and Jiangtao Liu and Dariusz Czarkowski and Mariusz Bojarski and Erdem Asa and {De Leon}, Francisco",
year = "2016",
month = "10",
day = "26",
doi = "10.1049/iet-pel.2015.0275",
language = "English (US)",
volume = "9",
pages = "2461--2470",
journal = "IET Power Electronics",
issn = "1755-4535",
publisher = "Institution of Engineering and Technology",
number = "13",

}

TY - JOUR

T1 - Design of a wireless charging system with a phase-controlled inverter under varying parameters

AU - Deng, Qijun

AU - Liu, Jiangtao

AU - Czarkowski, Dariusz

AU - Bojarski, Mariusz

AU - Asa, Erdem

AU - De Leon, Francisco

PY - 2016/10/26

Y1 - 2016/10/26

N2 - Class-D full bridge is the most common inverter topology at the primary side for wireless electric vehicles (EVs) charging systems. This study takes a novel topology of a phase-controlled inverter as the power amplifier and puts it in a context of the whole charging system. The proposed inverter topology regulates the charging power through adjusting the phase-shift angle among phases with a constant operating frequency, which alleviates the EMI filter design. For various wireless EVs chargers, the gaps between the primary side and the secondary side are changing, which results in various coupling factors k. The equivalent resistance of the EVs battery Rbattery is also changing during the charging process. Even resonant frequencies at two sides are variable because of the components tolerances and operating environments. This study presents design considerations of a wireless EVs charging system with the proposed technology under variable k, Rbattery, and resonant frequencies. Circuit parameters are designed and the system efficiency is derived. Industrial prototype of an EV charging system is manufactured with the proposed topology at 3.0 kW. Experiments show that these design considerations can reflect the system characteristics, and the proposed system is a good candidate to be used in wireless EV battery chargers.

AB - Class-D full bridge is the most common inverter topology at the primary side for wireless electric vehicles (EVs) charging systems. This study takes a novel topology of a phase-controlled inverter as the power amplifier and puts it in a context of the whole charging system. The proposed inverter topology regulates the charging power through adjusting the phase-shift angle among phases with a constant operating frequency, which alleviates the EMI filter design. For various wireless EVs chargers, the gaps between the primary side and the secondary side are changing, which results in various coupling factors k. The equivalent resistance of the EVs battery Rbattery is also changing during the charging process. Even resonant frequencies at two sides are variable because of the components tolerances and operating environments. This study presents design considerations of a wireless EVs charging system with the proposed technology under variable k, Rbattery, and resonant frequencies. Circuit parameters are designed and the system efficiency is derived. Industrial prototype of an EV charging system is manufactured with the proposed topology at 3.0 kW. Experiments show that these design considerations can reflect the system characteristics, and the proposed system is a good candidate to be used in wireless EV battery chargers.

UR - http://www.scopus.com/inward/record.url?scp=84992513340&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84992513340&partnerID=8YFLogxK

U2 - 10.1049/iet-pel.2015.0275

DO - 10.1049/iet-pel.2015.0275

M3 - Article

VL - 9

SP - 2461

EP - 2470

JO - IET Power Electronics

JF - IET Power Electronics

SN - 1755-4535

IS - 13

ER -