Deformations in adhesively bonded joints on elastic foundations

Khaled Shahin, Farid Taheri

    Research output: Contribution to journalArticle

    Abstract

    Analytical treatment of the deformations in adhesively bonded joints on elastic foundations is presented, with special attention to the specific case of adhesive joints between the face sheets of sandwich beams. While the subject of deformations in adhesively bonded joints has been studied in detail over the past six decades, no work on the subject of modeling adhesive joints on elastic foundations exist. The analytical model idealizes the overlap region as a single cylindrically bent plate, and thus applies to both balanced and unbalanced joint types of various configurations. The influence of the elastic foundation parameters on the magnitude of the edge moment is studied in detail. Results show that the elastic foundation acts to reduce the magnitude of the bending moments at the ends of the overlap, and alleviate the geometric non-linearity in the adhesive joint response. The integrity of the model is verified through good agreement with non-linear finite element model results, and other analytical models found in the literature. Strain energy release rates in adhesively bonded sandwich beams are computed using the proposed model, and are shown to correlate well with experimental results.

    Original languageEnglish (US)
    Pages (from-to)130-140
    Number of pages11
    JournalComposite Structures
    Volume90
    Issue number2
    DOIs
    StatePublished - Sep 1 2009

    Fingerprint

    Adhesive joints
    Analytical models
    Energy release rate
    Bending moments
    Strain energy

    Keywords

    • Adhesive joints
    • Elastic foundation
    • Fracture toughness
    • Joint deformation

    ASJC Scopus subject areas

    • Ceramics and Composites
    • Civil and Structural Engineering

    Cite this

    Deformations in adhesively bonded joints on elastic foundations. / Shahin, Khaled; Taheri, Farid.

    In: Composite Structures, Vol. 90, No. 2, 01.09.2009, p. 130-140.

    Research output: Contribution to journalArticle

    @article{1e294805cfd44fd8896d57ad91e0f84a,
    title = "Deformations in adhesively bonded joints on elastic foundations",
    abstract = "Analytical treatment of the deformations in adhesively bonded joints on elastic foundations is presented, with special attention to the specific case of adhesive joints between the face sheets of sandwich beams. While the subject of deformations in adhesively bonded joints has been studied in detail over the past six decades, no work on the subject of modeling adhesive joints on elastic foundations exist. The analytical model idealizes the overlap region as a single cylindrically bent plate, and thus applies to both balanced and unbalanced joint types of various configurations. The influence of the elastic foundation parameters on the magnitude of the edge moment is studied in detail. Results show that the elastic foundation acts to reduce the magnitude of the bending moments at the ends of the overlap, and alleviate the geometric non-linearity in the adhesive joint response. The integrity of the model is verified through good agreement with non-linear finite element model results, and other analytical models found in the literature. Strain energy release rates in adhesively bonded sandwich beams are computed using the proposed model, and are shown to correlate well with experimental results.",
    keywords = "Adhesive joints, Elastic foundation, Fracture toughness, Joint deformation",
    author = "Khaled Shahin and Farid Taheri",
    year = "2009",
    month = "9",
    day = "1",
    doi = "10.1016/j.compstruct.2009.02.011",
    language = "English (US)",
    volume = "90",
    pages = "130--140",
    journal = "Composite Structures",
    issn = "0263-8223",
    publisher = "Elsevier BV",
    number = "2",

    }

    TY - JOUR

    T1 - Deformations in adhesively bonded joints on elastic foundations

    AU - Shahin, Khaled

    AU - Taheri, Farid

    PY - 2009/9/1

    Y1 - 2009/9/1

    N2 - Analytical treatment of the deformations in adhesively bonded joints on elastic foundations is presented, with special attention to the specific case of adhesive joints between the face sheets of sandwich beams. While the subject of deformations in adhesively bonded joints has been studied in detail over the past six decades, no work on the subject of modeling adhesive joints on elastic foundations exist. The analytical model idealizes the overlap region as a single cylindrically bent plate, and thus applies to both balanced and unbalanced joint types of various configurations. The influence of the elastic foundation parameters on the magnitude of the edge moment is studied in detail. Results show that the elastic foundation acts to reduce the magnitude of the bending moments at the ends of the overlap, and alleviate the geometric non-linearity in the adhesive joint response. The integrity of the model is verified through good agreement with non-linear finite element model results, and other analytical models found in the literature. Strain energy release rates in adhesively bonded sandwich beams are computed using the proposed model, and are shown to correlate well with experimental results.

    AB - Analytical treatment of the deformations in adhesively bonded joints on elastic foundations is presented, with special attention to the specific case of adhesive joints between the face sheets of sandwich beams. While the subject of deformations in adhesively bonded joints has been studied in detail over the past six decades, no work on the subject of modeling adhesive joints on elastic foundations exist. The analytical model idealizes the overlap region as a single cylindrically bent plate, and thus applies to both balanced and unbalanced joint types of various configurations. The influence of the elastic foundation parameters on the magnitude of the edge moment is studied in detail. Results show that the elastic foundation acts to reduce the magnitude of the bending moments at the ends of the overlap, and alleviate the geometric non-linearity in the adhesive joint response. The integrity of the model is verified through good agreement with non-linear finite element model results, and other analytical models found in the literature. Strain energy release rates in adhesively bonded sandwich beams are computed using the proposed model, and are shown to correlate well with experimental results.

    KW - Adhesive joints

    KW - Elastic foundation

    KW - Fracture toughness

    KW - Joint deformation

    UR - http://www.scopus.com/inward/record.url?scp=67349106485&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=67349106485&partnerID=8YFLogxK

    U2 - 10.1016/j.compstruct.2009.02.011

    DO - 10.1016/j.compstruct.2009.02.011

    M3 - Article

    AN - SCOPUS:67349106485

    VL - 90

    SP - 130

    EP - 140

    JO - Composite Structures

    JF - Composite Structures

    SN - 0263-8223

    IS - 2

    ER -