Ceramic pressed to metal versus feldspathic porcelain fused to metal

A comparative study of bond strength

Bhavani Venkatachalam, Gary Goldstein, Mitchell S. Pines, Eugene L. Hittelman

Research output: Contribution to journalArticle

Abstract

Purpose: The aim of this study was to compare the debond/crack initiation strength (D/CIS) of a leucite-based low-fusing ceramic pressed (PC) to metal and feldspathic porcelain (FP) fused to metal. Materials and Methods: Forty rectangular metal specimens, 20 noble alloy (NA; gold-palladium) and 20 base metal alloy (BA; cobalt- chromium) were fabricated per ISO 9693:1999 standards (25.0 mm x 0.5 mm x 3.0 mm). Ten samples in each group received FP and the r10 received PC. The samples in the PC group underwent wax pattern build-ups and subsequent investing and casting. The ceramic dimensions in all four groups were 8.0 mm x 1.0 mm x 3.0 mm. The final metal-ceramic specimen thickness was 1.5 mm. All specimens were subject to the Schwickerath crack-initiation three-point bending test at a crosshead speed of 1.5 mm/min. Metal-ceramic fracture loads were recorded in Newtons and D/CIS was calculated using the formula: T b = k x× Ffail. Results: Mean D/CIS were as follows: BA-FP: 36.11 ±2.31 MPa, NA-FP: 42.64 ±1.94 MPa, BA-PC: 37.47 ±6.02 MPa, and NA-PC: 47.94 ±3.92 MPa. A 2-way ANOVA revealed no significant difference in D/CIS values between the four groups. A statistically significant difference was noted when comparing the mean D/CIS values obtained between the two metal alloys used (NA: 45.29 MPa and BA: 36.79 MPa). Conclusion: No differences (P > .05) in mean D/CIS were found between the low-fusing ceramic pressed to metal and the FP fused to metal. A higher mean D/CIS (P > .05) was found for the NA compared to the BA, with both ceramics tested.

Original languageEnglish (US)
Pages (from-to)94-100
Number of pages7
JournalInternational Journal of Prosthodontics
Volume22
Issue number1
StatePublished - 2009

Fingerprint

Dental Porcelain
Ceramics
Metals
Chromium Alloys
Gold Alloys
Waxes
Palladium
varespladib methyl
Analysis of Variance

ASJC Scopus subject areas

  • Oral Surgery

Cite this

Ceramic pressed to metal versus feldspathic porcelain fused to metal : A comparative study of bond strength. / Venkatachalam, Bhavani; Goldstein, Gary; Pines, Mitchell S.; Hittelman, Eugene L.

In: International Journal of Prosthodontics, Vol. 22, No. 1, 2009, p. 94-100.

Research output: Contribution to journalArticle

Venkatachalam, Bhavani ; Goldstein, Gary ; Pines, Mitchell S. ; Hittelman, Eugene L. / Ceramic pressed to metal versus feldspathic porcelain fused to metal : A comparative study of bond strength. In: International Journal of Prosthodontics. 2009 ; Vol. 22, No. 1. pp. 94-100.
@article{8d0db5437d984500b7c3b8fb13354b92,
title = "Ceramic pressed to metal versus feldspathic porcelain fused to metal: A comparative study of bond strength",
abstract = "Purpose: The aim of this study was to compare the debond/crack initiation strength (D/CIS) of a leucite-based low-fusing ceramic pressed (PC) to metal and feldspathic porcelain (FP) fused to metal. Materials and Methods: Forty rectangular metal specimens, 20 noble alloy (NA; gold-palladium) and 20 base metal alloy (BA; cobalt- chromium) were fabricated per ISO 9693:1999 standards (25.0 mm x 0.5 mm x 3.0 mm). Ten samples in each group received FP and the r10 received PC. The samples in the PC group underwent wax pattern build-ups and subsequent investing and casting. The ceramic dimensions in all four groups were 8.0 mm x 1.0 mm x 3.0 mm. The final metal-ceramic specimen thickness was 1.5 mm. All specimens were subject to the Schwickerath crack-initiation three-point bending test at a crosshead speed of 1.5 mm/min. Metal-ceramic fracture loads were recorded in Newtons and D/CIS was calculated using the formula: T b = k x× Ffail. Results: Mean D/CIS were as follows: BA-FP: 36.11 ±2.31 MPa, NA-FP: 42.64 ±1.94 MPa, BA-PC: 37.47 ±6.02 MPa, and NA-PC: 47.94 ±3.92 MPa. A 2-way ANOVA revealed no significant difference in D/CIS values between the four groups. A statistically significant difference was noted when comparing the mean D/CIS values obtained between the two metal alloys used (NA: 45.29 MPa and BA: 36.79 MPa). Conclusion: No differences (P > .05) in mean D/CIS were found between the low-fusing ceramic pressed to metal and the FP fused to metal. A higher mean D/CIS (P > .05) was found for the NA compared to the BA, with both ceramics tested.",
author = "Bhavani Venkatachalam and Gary Goldstein and Pines, {Mitchell S.} and Hittelman, {Eugene L.}",
year = "2009",
language = "English (US)",
volume = "22",
pages = "94--100",
journal = "International Journal of Prosthodontics",
issn = "0893-2174",
publisher = "Quintessence Publishing Company",
number = "1",

}

TY - JOUR

T1 - Ceramic pressed to metal versus feldspathic porcelain fused to metal

T2 - A comparative study of bond strength

AU - Venkatachalam, Bhavani

AU - Goldstein, Gary

AU - Pines, Mitchell S.

AU - Hittelman, Eugene L.

PY - 2009

Y1 - 2009

N2 - Purpose: The aim of this study was to compare the debond/crack initiation strength (D/CIS) of a leucite-based low-fusing ceramic pressed (PC) to metal and feldspathic porcelain (FP) fused to metal. Materials and Methods: Forty rectangular metal specimens, 20 noble alloy (NA; gold-palladium) and 20 base metal alloy (BA; cobalt- chromium) were fabricated per ISO 9693:1999 standards (25.0 mm x 0.5 mm x 3.0 mm). Ten samples in each group received FP and the r10 received PC. The samples in the PC group underwent wax pattern build-ups and subsequent investing and casting. The ceramic dimensions in all four groups were 8.0 mm x 1.0 mm x 3.0 mm. The final metal-ceramic specimen thickness was 1.5 mm. All specimens were subject to the Schwickerath crack-initiation three-point bending test at a crosshead speed of 1.5 mm/min. Metal-ceramic fracture loads were recorded in Newtons and D/CIS was calculated using the formula: T b = k x× Ffail. Results: Mean D/CIS were as follows: BA-FP: 36.11 ±2.31 MPa, NA-FP: 42.64 ±1.94 MPa, BA-PC: 37.47 ±6.02 MPa, and NA-PC: 47.94 ±3.92 MPa. A 2-way ANOVA revealed no significant difference in D/CIS values between the four groups. A statistically significant difference was noted when comparing the mean D/CIS values obtained between the two metal alloys used (NA: 45.29 MPa and BA: 36.79 MPa). Conclusion: No differences (P > .05) in mean D/CIS were found between the low-fusing ceramic pressed to metal and the FP fused to metal. A higher mean D/CIS (P > .05) was found for the NA compared to the BA, with both ceramics tested.

AB - Purpose: The aim of this study was to compare the debond/crack initiation strength (D/CIS) of a leucite-based low-fusing ceramic pressed (PC) to metal and feldspathic porcelain (FP) fused to metal. Materials and Methods: Forty rectangular metal specimens, 20 noble alloy (NA; gold-palladium) and 20 base metal alloy (BA; cobalt- chromium) were fabricated per ISO 9693:1999 standards (25.0 mm x 0.5 mm x 3.0 mm). Ten samples in each group received FP and the r10 received PC. The samples in the PC group underwent wax pattern build-ups and subsequent investing and casting. The ceramic dimensions in all four groups were 8.0 mm x 1.0 mm x 3.0 mm. The final metal-ceramic specimen thickness was 1.5 mm. All specimens were subject to the Schwickerath crack-initiation three-point bending test at a crosshead speed of 1.5 mm/min. Metal-ceramic fracture loads were recorded in Newtons and D/CIS was calculated using the formula: T b = k x× Ffail. Results: Mean D/CIS were as follows: BA-FP: 36.11 ±2.31 MPa, NA-FP: 42.64 ±1.94 MPa, BA-PC: 37.47 ±6.02 MPa, and NA-PC: 47.94 ±3.92 MPa. A 2-way ANOVA revealed no significant difference in D/CIS values between the four groups. A statistically significant difference was noted when comparing the mean D/CIS values obtained between the two metal alloys used (NA: 45.29 MPa and BA: 36.79 MPa). Conclusion: No differences (P > .05) in mean D/CIS were found between the low-fusing ceramic pressed to metal and the FP fused to metal. A higher mean D/CIS (P > .05) was found for the NA compared to the BA, with both ceramics tested.

UR - http://www.scopus.com/inward/record.url?scp=65549150845&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=65549150845&partnerID=8YFLogxK

M3 - Article

VL - 22

SP - 94

EP - 100

JO - International Journal of Prosthodontics

JF - International Journal of Prosthodontics

SN - 0893-2174

IS - 1

ER -