Birefringence and depolarized light scattering of an ordered block copolymer melt under shear flow

H. Wang, M. C. Newstein, M. Y. Chang, N. P. Balsara, Bruce Garetz

Research output: Contribution to journalArticle

Abstract

A combination of in situ birefringence and depolarized light-scattering experiments was used to study the formation of an ordered cylindrical microstructure in a polystyrene-block-polyisoprene copolymer melt under a shear flow field. We demonstrate that our sample forms an imperfect `single crystal' with a fraction of the cylinders aligned in the flow direction. The aligned regions of the sample coexist with randomly oriented grains. The birefringence experiments enable the characterization of the aligned regions while the depolarized light-scattering experiments enable the characterization of the randomly oriented grains. A model for depolarized light scattering from such samples was developed. It was shown that the usual scattering formulas for grains embedded in an isotropic matrix are applicable provided one recognizes that the scattering vector, q, has transverse (qT) and longitudinal (qL) components even in the small angle scattering limit (qL is the component of q in the propagation direction). This result applies when the analyzer (or polarizer) axis is aligned along the direction of the optic axis of the aligned regions. A simplifying feature of block copolymers is that the product w|qL|≪1, where w is the characteristic grain size, allowing the approximation q≈qT. We used our model to study the structure of the block copolymer melt after it had been quenched from the disordered to the ordered state under reciprocating shear flow (strain amplitude = 133%). Under slow shear flow (shear rate, γ = 0.067 s-1), about 60% of the sample consisted of randomly oriented grains and 40% consisted of aligned cylinders. The average grain size and time required to complete the ordering process obtained under slow shear flow were comparable to those obtained under quiescent conditions. Under fast shear flow (γ = 0.67 s-1), however, most of the sample (97%) consisted of aligned cylinders, indicating the formation of a well-aligned crystal.

Original languageEnglish (US)
Pages (from-to)3719-3730
Number of pages12
JournalMacromolecules
Volume33
Issue number10
DOIs
StatePublished - 2000

Fingerprint

Shear flow
Birefringence
Light scattering
Block copolymers
Scattering
Polyisoprenes
Experiments
Shear deformation
Optics
Polystyrenes
Flow fields
Copolymers
Single crystals
Crystals
Microstructure
Direction compound

ASJC Scopus subject areas

  • Materials Chemistry

Cite this

Birefringence and depolarized light scattering of an ordered block copolymer melt under shear flow. / Wang, H.; Newstein, M. C.; Chang, M. Y.; Balsara, N. P.; Garetz, Bruce.

In: Macromolecules, Vol. 33, No. 10, 2000, p. 3719-3730.

Research output: Contribution to journalArticle

Wang, H. ; Newstein, M. C. ; Chang, M. Y. ; Balsara, N. P. ; Garetz, Bruce. / Birefringence and depolarized light scattering of an ordered block copolymer melt under shear flow. In: Macromolecules. 2000 ; Vol. 33, No. 10. pp. 3719-3730.
@article{773ae3dd1f0845108b1cd22e46fc05ea,
title = "Birefringence and depolarized light scattering of an ordered block copolymer melt under shear flow",
abstract = "A combination of in situ birefringence and depolarized light-scattering experiments was used to study the formation of an ordered cylindrical microstructure in a polystyrene-block-polyisoprene copolymer melt under a shear flow field. We demonstrate that our sample forms an imperfect `single crystal' with a fraction of the cylinders aligned in the flow direction. The aligned regions of the sample coexist with randomly oriented grains. The birefringence experiments enable the characterization of the aligned regions while the depolarized light-scattering experiments enable the characterization of the randomly oriented grains. A model for depolarized light scattering from such samples was developed. It was shown that the usual scattering formulas for grains embedded in an isotropic matrix are applicable provided one recognizes that the scattering vector, q, has transverse (qT) and longitudinal (qL) components even in the small angle scattering limit (qL is the component of q in the propagation direction). This result applies when the analyzer (or polarizer) axis is aligned along the direction of the optic axis of the aligned regions. A simplifying feature of block copolymers is that the product w|qL|≪1, where w is the characteristic grain size, allowing the approximation q≈qT. We used our model to study the structure of the block copolymer melt after it had been quenched from the disordered to the ordered state under reciprocating shear flow (strain amplitude = 133{\%}). Under slow shear flow (shear rate, γ = 0.067 s-1), about 60{\%} of the sample consisted of randomly oriented grains and 40{\%} consisted of aligned cylinders. The average grain size and time required to complete the ordering process obtained under slow shear flow were comparable to those obtained under quiescent conditions. Under fast shear flow (γ = 0.67 s-1), however, most of the sample (97{\%}) consisted of aligned cylinders, indicating the formation of a well-aligned crystal.",
author = "H. Wang and Newstein, {M. C.} and Chang, {M. Y.} and Balsara, {N. P.} and Bruce Garetz",
year = "2000",
doi = "10.1021/ma991982z",
language = "English (US)",
volume = "33",
pages = "3719--3730",
journal = "Macromolecules",
issn = "0024-9297",
publisher = "American Chemical Society",
number = "10",

}

TY - JOUR

T1 - Birefringence and depolarized light scattering of an ordered block copolymer melt under shear flow

AU - Wang, H.

AU - Newstein, M. C.

AU - Chang, M. Y.

AU - Balsara, N. P.

AU - Garetz, Bruce

PY - 2000

Y1 - 2000

N2 - A combination of in situ birefringence and depolarized light-scattering experiments was used to study the formation of an ordered cylindrical microstructure in a polystyrene-block-polyisoprene copolymer melt under a shear flow field. We demonstrate that our sample forms an imperfect `single crystal' with a fraction of the cylinders aligned in the flow direction. The aligned regions of the sample coexist with randomly oriented grains. The birefringence experiments enable the characterization of the aligned regions while the depolarized light-scattering experiments enable the characterization of the randomly oriented grains. A model for depolarized light scattering from such samples was developed. It was shown that the usual scattering formulas for grains embedded in an isotropic matrix are applicable provided one recognizes that the scattering vector, q, has transverse (qT) and longitudinal (qL) components even in the small angle scattering limit (qL is the component of q in the propagation direction). This result applies when the analyzer (or polarizer) axis is aligned along the direction of the optic axis of the aligned regions. A simplifying feature of block copolymers is that the product w|qL|≪1, where w is the characteristic grain size, allowing the approximation q≈qT. We used our model to study the structure of the block copolymer melt after it had been quenched from the disordered to the ordered state under reciprocating shear flow (strain amplitude = 133%). Under slow shear flow (shear rate, γ = 0.067 s-1), about 60% of the sample consisted of randomly oriented grains and 40% consisted of aligned cylinders. The average grain size and time required to complete the ordering process obtained under slow shear flow were comparable to those obtained under quiescent conditions. Under fast shear flow (γ = 0.67 s-1), however, most of the sample (97%) consisted of aligned cylinders, indicating the formation of a well-aligned crystal.

AB - A combination of in situ birefringence and depolarized light-scattering experiments was used to study the formation of an ordered cylindrical microstructure in a polystyrene-block-polyisoprene copolymer melt under a shear flow field. We demonstrate that our sample forms an imperfect `single crystal' with a fraction of the cylinders aligned in the flow direction. The aligned regions of the sample coexist with randomly oriented grains. The birefringence experiments enable the characterization of the aligned regions while the depolarized light-scattering experiments enable the characterization of the randomly oriented grains. A model for depolarized light scattering from such samples was developed. It was shown that the usual scattering formulas for grains embedded in an isotropic matrix are applicable provided one recognizes that the scattering vector, q, has transverse (qT) and longitudinal (qL) components even in the small angle scattering limit (qL is the component of q in the propagation direction). This result applies when the analyzer (or polarizer) axis is aligned along the direction of the optic axis of the aligned regions. A simplifying feature of block copolymers is that the product w|qL|≪1, where w is the characteristic grain size, allowing the approximation q≈qT. We used our model to study the structure of the block copolymer melt after it had been quenched from the disordered to the ordered state under reciprocating shear flow (strain amplitude = 133%). Under slow shear flow (shear rate, γ = 0.067 s-1), about 60% of the sample consisted of randomly oriented grains and 40% consisted of aligned cylinders. The average grain size and time required to complete the ordering process obtained under slow shear flow were comparable to those obtained under quiescent conditions. Under fast shear flow (γ = 0.67 s-1), however, most of the sample (97%) consisted of aligned cylinders, indicating the formation of a well-aligned crystal.

UR - http://www.scopus.com/inward/record.url?scp=0033749504&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033749504&partnerID=8YFLogxK

U2 - 10.1021/ma991982z

DO - 10.1021/ma991982z

M3 - Article

AN - SCOPUS:0033749504

VL - 33

SP - 3719

EP - 3730

JO - Macromolecules

JF - Macromolecules

SN - 0024-9297

IS - 10

ER -