Atomic force microscopy as a tool for asymmetric polymeric membrane characterization

Abdul Wahab Mohammad, Nidal Hilal, Lim Ying Pei, Indok Nurul Hasyimah Mohd Amin, Rafeqah Raslan

Research output: Contribution to journalArticle

Abstract

Atomic force microscopy (AFM) has a wide range of applications and is rapidly growing in research and development. This powerful technique has been used to visualize surfaces both in liquid or gas media. It has been considered as an effective tool to investigate the surface structure for its ability to generate high-resolution 3D images at a subnanometer range without sample pretreatment. In this paper, the use of AFM to characterize the membrane roughness is presented for commercial and self-prepared membranes for specific applications. Surface roughness has been regarded as one of the most important surface properties, and has significant effect in membrane permeability and fouling behaviour. Several scan areas were used to compare surface roughness for different membrane samples. Characterization of the surfaces was achieved by measuring the average roughness (Ra) and root mean square roughness (Rrms) of the membrane. AFM image shows that the membrane surface was composed entirely of peaks and valleys. Surface roughness is substantially greater for commercial available hydrophobic membranes, in contrast to self-prepared membranes. This study also shows that foulants deposited on membrane surface would increase the membrane roughness.

Original languageEnglish (US)
Pages (from-to)237-244
Number of pages8
JournalSains Malaysiana
Volume40
Issue number3
StatePublished - Mar 1 2011

    Fingerprint

Keywords

  • Atomic force microscopy (afm)
  • Fouling
  • Hydrophobic
  • Membrane roughness

ASJC Scopus subject areas

  • General

Cite this

Mohammad, A. W., Hilal, N., Pei, L. Y., Mohd Amin, I. N. H., & Raslan, R. (2011). Atomic force microscopy as a tool for asymmetric polymeric membrane characterization. Sains Malaysiana, 40(3), 237-244.