Aerogel-epoxy resin syntactic foams: Processing parameters and compressive properties

W. Ricci, S. K. Gupta, Nikhil Gupta

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Aerogels are extremely lightweight materials composed of almost 99.98 vol% of interconnected channels. These materials present excellent opportunities for developing ultra-lightweight composite materials. These materials can provide low density to the composite materials along with several special properties such as electrical insulation and controlled dielectric constant. Only partial success is achieved in efforts of fabricating aerogel-epoxy syntactic foams. Although, the size of porous channels is only a few nm in aerogel particles, infiltration of resin into these channels appears to be the main problem during fabrication of composites. Several processing parameters such as the temperature and viscosity of the resin are varied to facilitate better mixing and wetting. Most composite material specimens synthesized by this method contain density in the range of 800-1100 kg/m 3. Compression tests have been conducted on these materials and their deformation and fracture behavior is studied. Better control over the processing parameters needs to be achieved to obtain composites containing density in the desired range of 400-500 kg/m 3.

Original languageEnglish (US)
Title of host publicationAmerican Society for Composites - 21st Technical Conference of the American Society for Composites 2006
Pages691-698
Number of pages8
Volume2
StatePublished - 2006
Event21st Technical Conference of the American Society for Composites 2006 - Dearborn, MI, United States
Duration: Sep 17 2006Sep 20 2006

Other

Other21st Technical Conference of the American Society for Composites 2006
CountryUnited States
CityDearborn, MI
Period9/17/069/20/06

Fingerprint

Epoxy Resins
Aerogels
Syntactics
Epoxy resins
Foams
Composite materials
Processing
Resins
Infiltration
Particles (particulate matter)
Wetting
Insulation
Compaction
Permittivity
Viscosity
Fabrication

ASJC Scopus subject areas

  • Ceramics and Composites

Cite this

Ricci, W., Gupta, S. K., & Gupta, N. (2006). Aerogel-epoxy resin syntactic foams: Processing parameters and compressive properties. In American Society for Composites - 21st Technical Conference of the American Society for Composites 2006 (Vol. 2, pp. 691-698)

Aerogel-epoxy resin syntactic foams : Processing parameters and compressive properties. / Ricci, W.; Gupta, S. K.; Gupta, Nikhil.

American Society for Composites - 21st Technical Conference of the American Society for Composites 2006. Vol. 2 2006. p. 691-698.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ricci, W, Gupta, SK & Gupta, N 2006, Aerogel-epoxy resin syntactic foams: Processing parameters and compressive properties. in American Society for Composites - 21st Technical Conference of the American Society for Composites 2006. vol. 2, pp. 691-698, 21st Technical Conference of the American Society for Composites 2006, Dearborn, MI, United States, 9/17/06.
Ricci W, Gupta SK, Gupta N. Aerogel-epoxy resin syntactic foams: Processing parameters and compressive properties. In American Society for Composites - 21st Technical Conference of the American Society for Composites 2006. Vol. 2. 2006. p. 691-698
Ricci, W. ; Gupta, S. K. ; Gupta, Nikhil. / Aerogel-epoxy resin syntactic foams : Processing parameters and compressive properties. American Society for Composites - 21st Technical Conference of the American Society for Composites 2006. Vol. 2 2006. pp. 691-698
@inproceedings{5aebca8005534618a169c3bbad1d3bb5,
title = "Aerogel-epoxy resin syntactic foams: Processing parameters and compressive properties",
abstract = "Aerogels are extremely lightweight materials composed of almost 99.98 vol{\%} of interconnected channels. These materials present excellent opportunities for developing ultra-lightweight composite materials. These materials can provide low density to the composite materials along with several special properties such as electrical insulation and controlled dielectric constant. Only partial success is achieved in efforts of fabricating aerogel-epoxy syntactic foams. Although, the size of porous channels is only a few nm in aerogel particles, infiltration of resin into these channels appears to be the main problem during fabrication of composites. Several processing parameters such as the temperature and viscosity of the resin are varied to facilitate better mixing and wetting. Most composite material specimens synthesized by this method contain density in the range of 800-1100 kg/m 3. Compression tests have been conducted on these materials and their deformation and fracture behavior is studied. Better control over the processing parameters needs to be achieved to obtain composites containing density in the desired range of 400-500 kg/m 3.",
author = "W. Ricci and Gupta, {S. K.} and Nikhil Gupta",
year = "2006",
language = "English (US)",
isbn = "9781604237665",
volume = "2",
pages = "691--698",
booktitle = "American Society for Composites - 21st Technical Conference of the American Society for Composites 2006",

}

TY - GEN

T1 - Aerogel-epoxy resin syntactic foams

T2 - Processing parameters and compressive properties

AU - Ricci, W.

AU - Gupta, S. K.

AU - Gupta, Nikhil

PY - 2006

Y1 - 2006

N2 - Aerogels are extremely lightweight materials composed of almost 99.98 vol% of interconnected channels. These materials present excellent opportunities for developing ultra-lightweight composite materials. These materials can provide low density to the composite materials along with several special properties such as electrical insulation and controlled dielectric constant. Only partial success is achieved in efforts of fabricating aerogel-epoxy syntactic foams. Although, the size of porous channels is only a few nm in aerogel particles, infiltration of resin into these channels appears to be the main problem during fabrication of composites. Several processing parameters such as the temperature and viscosity of the resin are varied to facilitate better mixing and wetting. Most composite material specimens synthesized by this method contain density in the range of 800-1100 kg/m 3. Compression tests have been conducted on these materials and their deformation and fracture behavior is studied. Better control over the processing parameters needs to be achieved to obtain composites containing density in the desired range of 400-500 kg/m 3.

AB - Aerogels are extremely lightweight materials composed of almost 99.98 vol% of interconnected channels. These materials present excellent opportunities for developing ultra-lightweight composite materials. These materials can provide low density to the composite materials along with several special properties such as electrical insulation and controlled dielectric constant. Only partial success is achieved in efforts of fabricating aerogel-epoxy syntactic foams. Although, the size of porous channels is only a few nm in aerogel particles, infiltration of resin into these channels appears to be the main problem during fabrication of composites. Several processing parameters such as the temperature and viscosity of the resin are varied to facilitate better mixing and wetting. Most composite material specimens synthesized by this method contain density in the range of 800-1100 kg/m 3. Compression tests have been conducted on these materials and their deformation and fracture behavior is studied. Better control over the processing parameters needs to be achieved to obtain composites containing density in the desired range of 400-500 kg/m 3.

UR - http://www.scopus.com/inward/record.url?scp=84867626483&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84867626483&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84867626483

SN - 9781604237665

VL - 2

SP - 691

EP - 698

BT - American Society for Composites - 21st Technical Conference of the American Society for Composites 2006

ER -