Adaptive blind 2D Rake receiver for multiuser detection

Jaeyoung Kwak, I-Tai Lu

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A novel blind 2D Rake receiver for multiuser detection with interference rejection in DS-CDMA cellular communication systems is presented. The receiver consists of an array of receiving antennas and each antenna is connected to K filters where K is the number of users. The filter outputs are combined and despread to suppress both multiuser interference and intersymbol interference. The outputs are subsequently fed into a decorrelator to further suppress the multiuser interference. The complex weighting factors of the tap delays of these filters are adaptively determined by a hybrid combination of the constant modulus algorithm and the decision-directed algorithm. No training sequence is required, and beamforming and equalization are performed simultaneously. The blind adaptive scheme converges approximately after 100 symbol periods when the input SNR of the desired signal is 10 dB. And a 30 dB reduction of the output mean square error or, equivalently, an 30 dB improvement of the output SINR is obtained even when the maximum difference of the received signal power is up to 9 dB.

Original languageEnglish (US)
Title of host publicationIEEE Vehicular Technology Conference
PublisherIEEE
Pages313-317
Number of pages5
Volume1
StatePublished - 1998
EventProceedings of the 1998 48th IEEE Vehicular Technology Conference, VTC'98. Part 3 (of 3) - Ottawa, Can
Duration: May 18 1998May 21 1998

Other

OtherProceedings of the 1998 48th IEEE Vehicular Technology Conference, VTC'98. Part 3 (of 3)
CityOttawa, Can
Period5/18/985/21/98

Fingerprint

Multiuser detection
Cellular radio systems
Receiving antennas
Intersymbol interference
Beamforming
Mean square error
Code division multiple access
Communication systems
Antennas

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Kwak, J., & Lu, I-T. (1998). Adaptive blind 2D Rake receiver for multiuser detection. In IEEE Vehicular Technology Conference (Vol. 1, pp. 313-317). IEEE.

Adaptive blind 2D Rake receiver for multiuser detection. / Kwak, Jaeyoung; Lu, I-Tai.

IEEE Vehicular Technology Conference. Vol. 1 IEEE, 1998. p. 313-317.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kwak, J & Lu, I-T 1998, Adaptive blind 2D Rake receiver for multiuser detection. in IEEE Vehicular Technology Conference. vol. 1, IEEE, pp. 313-317, Proceedings of the 1998 48th IEEE Vehicular Technology Conference, VTC'98. Part 3 (of 3), Ottawa, Can, 5/18/98.
Kwak J, Lu I-T. Adaptive blind 2D Rake receiver for multiuser detection. In IEEE Vehicular Technology Conference. Vol. 1. IEEE. 1998. p. 313-317
Kwak, Jaeyoung ; Lu, I-Tai. / Adaptive blind 2D Rake receiver for multiuser detection. IEEE Vehicular Technology Conference. Vol. 1 IEEE, 1998. pp. 313-317
@inproceedings{7943245834b64fe3abc432b9936f9723,
title = "Adaptive blind 2D Rake receiver for multiuser detection",
abstract = "A novel blind 2D Rake receiver for multiuser detection with interference rejection in DS-CDMA cellular communication systems is presented. The receiver consists of an array of receiving antennas and each antenna is connected to K filters where K is the number of users. The filter outputs are combined and despread to suppress both multiuser interference and intersymbol interference. The outputs are subsequently fed into a decorrelator to further suppress the multiuser interference. The complex weighting factors of the tap delays of these filters are adaptively determined by a hybrid combination of the constant modulus algorithm and the decision-directed algorithm. No training sequence is required, and beamforming and equalization are performed simultaneously. The blind adaptive scheme converges approximately after 100 symbol periods when the input SNR of the desired signal is 10 dB. And a 30 dB reduction of the output mean square error or, equivalently, an 30 dB improvement of the output SINR is obtained even when the maximum difference of the received signal power is up to 9 dB.",
author = "Jaeyoung Kwak and I-Tai Lu",
year = "1998",
language = "English (US)",
volume = "1",
pages = "313--317",
booktitle = "IEEE Vehicular Technology Conference",
publisher = "IEEE",

}

TY - GEN

T1 - Adaptive blind 2D Rake receiver for multiuser detection

AU - Kwak, Jaeyoung

AU - Lu, I-Tai

PY - 1998

Y1 - 1998

N2 - A novel blind 2D Rake receiver for multiuser detection with interference rejection in DS-CDMA cellular communication systems is presented. The receiver consists of an array of receiving antennas and each antenna is connected to K filters where K is the number of users. The filter outputs are combined and despread to suppress both multiuser interference and intersymbol interference. The outputs are subsequently fed into a decorrelator to further suppress the multiuser interference. The complex weighting factors of the tap delays of these filters are adaptively determined by a hybrid combination of the constant modulus algorithm and the decision-directed algorithm. No training sequence is required, and beamforming and equalization are performed simultaneously. The blind adaptive scheme converges approximately after 100 symbol periods when the input SNR of the desired signal is 10 dB. And a 30 dB reduction of the output mean square error or, equivalently, an 30 dB improvement of the output SINR is obtained even when the maximum difference of the received signal power is up to 9 dB.

AB - A novel blind 2D Rake receiver for multiuser detection with interference rejection in DS-CDMA cellular communication systems is presented. The receiver consists of an array of receiving antennas and each antenna is connected to K filters where K is the number of users. The filter outputs are combined and despread to suppress both multiuser interference and intersymbol interference. The outputs are subsequently fed into a decorrelator to further suppress the multiuser interference. The complex weighting factors of the tap delays of these filters are adaptively determined by a hybrid combination of the constant modulus algorithm and the decision-directed algorithm. No training sequence is required, and beamforming and equalization are performed simultaneously. The blind adaptive scheme converges approximately after 100 symbol periods when the input SNR of the desired signal is 10 dB. And a 30 dB reduction of the output mean square error or, equivalently, an 30 dB improvement of the output SINR is obtained even when the maximum difference of the received signal power is up to 9 dB.

UR - http://www.scopus.com/inward/record.url?scp=0032318768&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032318768&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0032318768

VL - 1

SP - 313

EP - 317

BT - IEEE Vehicular Technology Conference

PB - IEEE

ER -