A Fully differential potentiostat circuit with integrated time-based adcs

Saqib Subhan, Sachin Khapli, Yong Ak Song, Sohmyung Ha

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A fully differential CMOS analog front-end circuit for electrochemical sensing is presented. Its first stage is based on a differential transimpedance amplifier (TIA) with an input common-mode feedback to maintain the potentials at the differential working electrodes. The differential output of the first stage is further amplified at the second stage to resolve a smaller range of current differences down to less than 100 fA. The integration capacitor in the first stage and the gain of the second stage are programmable to cover a wide range of the input current ranges up to a range of μA. The proposed potentiostat incorporates two ADC stages, one for each stage. While the outputs of the first stage are compared with a threshold voltage, the whole integration time for both the currents is converted to digital by counters. When difference between the two inputs is too small to be resolved by this ADC, the second stage now becomes a dual-slope ADC to quantize the amplified difference. The ADC in the second stage incorporates a charge/discharge current source, which allows a time-domain measurement of the amplified signal. This method avoids the use of a separate ADC stage, which will consume additional power and area. The proposed potentiostat circuit is designed in 180nm CMOS SOI process technology. Simulation results show that this architecture can accurately measure the differential input current from 1 pA to 1 μA. The minimum input referred integrated current noise in 1 Hz to 10 kHz bandwidth is less than 100 fA with power consumption of 15 μA from ±1-V supply. This fully differential design is adequate to be integrated in an implantable amperometric electrochemical sensing device with low area and power requirements while offering robustness to background current variations.

Original languageEnglish (US)
Title of host publicationBioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781509006175
DOIs
StatePublished - Oct 2019
Event2019 IEEE Biomedical Circuits and Systems Conference, BioCAS 2019 - Nara, Japan
Duration: Oct 17 2019Oct 19 2019

Publication series

NameBioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings

Conference

Conference2019 IEEE Biomedical Circuits and Systems Conference, BioCAS 2019
CountryJapan
CityNara
Period10/17/1910/19/19

Fingerprint

Differential amplifiers
Networks (circuits)
Operational amplifiers
Threshold voltage
Electric power utilization
Capacitors
Feedback
Bandwidth
Electrodes
CMOS
differential amplifiers
output
SOI (semiconductors)
threshold voltage
capacitors
counters
analogs
slopes
bandwidth
requirements

ASJC Scopus subject areas

  • Artificial Intelligence
  • Biomedical Engineering
  • Electrical and Electronic Engineering
  • Instrumentation

Cite this

Subhan, S., Khapli, S., Song, Y. A., & Ha, S. (2019). A Fully differential potentiostat circuit with integrated time-based adcs. In BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings [8919031] (BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/BIOCAS.2019.8919031

A Fully differential potentiostat circuit with integrated time-based adcs. / Subhan, Saqib; Khapli, Sachin; Song, Yong Ak; Ha, Sohmyung.

BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. 8919031 (BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Subhan, S, Khapli, S, Song, YA & Ha, S 2019, A Fully differential potentiostat circuit with integrated time-based adcs. in BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings., 8919031, BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings, Institute of Electrical and Electronics Engineers Inc., 2019 IEEE Biomedical Circuits and Systems Conference, BioCAS 2019, Nara, Japan, 10/17/19. https://doi.org/10.1109/BIOCAS.2019.8919031
Subhan S, Khapli S, Song YA, Ha S. A Fully differential potentiostat circuit with integrated time-based adcs. In BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings. Institute of Electrical and Electronics Engineers Inc. 2019. 8919031. (BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings). https://doi.org/10.1109/BIOCAS.2019.8919031
Subhan, Saqib ; Khapli, Sachin ; Song, Yong Ak ; Ha, Sohmyung. / A Fully differential potentiostat circuit with integrated time-based adcs. BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. (BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings).
@inproceedings{9ef0e7b473a6410fad3a94f4d577272c,
title = "A Fully differential potentiostat circuit with integrated time-based adcs",
abstract = "A fully differential CMOS analog front-end circuit for electrochemical sensing is presented. Its first stage is based on a differential transimpedance amplifier (TIA) with an input common-mode feedback to maintain the potentials at the differential working electrodes. The differential output of the first stage is further amplified at the second stage to resolve a smaller range of current differences down to less than 100 fA. The integration capacitor in the first stage and the gain of the second stage are programmable to cover a wide range of the input current ranges up to a range of μA. The proposed potentiostat incorporates two ADC stages, one for each stage. While the outputs of the first stage are compared with a threshold voltage, the whole integration time for both the currents is converted to digital by counters. When difference between the two inputs is too small to be resolved by this ADC, the second stage now becomes a dual-slope ADC to quantize the amplified difference. The ADC in the second stage incorporates a charge/discharge current source, which allows a time-domain measurement of the amplified signal. This method avoids the use of a separate ADC stage, which will consume additional power and area. The proposed potentiostat circuit is designed in 180nm CMOS SOI process technology. Simulation results show that this architecture can accurately measure the differential input current from 1 pA to 1 μA. The minimum input referred integrated current noise in 1 Hz to 10 kHz bandwidth is less than 100 fA with power consumption of 15 μA from ±1-V supply. This fully differential design is adequate to be integrated in an implantable amperometric electrochemical sensing device with low area and power requirements while offering robustness to background current variations.",
author = "Saqib Subhan and Sachin Khapli and Song, {Yong Ak} and Sohmyung Ha",
year = "2019",
month = "10",
doi = "10.1109/BIOCAS.2019.8919031",
language = "English (US)",
series = "BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
booktitle = "BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings",

}

TY - GEN

T1 - A Fully differential potentiostat circuit with integrated time-based adcs

AU - Subhan, Saqib

AU - Khapli, Sachin

AU - Song, Yong Ak

AU - Ha, Sohmyung

PY - 2019/10

Y1 - 2019/10

N2 - A fully differential CMOS analog front-end circuit for electrochemical sensing is presented. Its first stage is based on a differential transimpedance amplifier (TIA) with an input common-mode feedback to maintain the potentials at the differential working electrodes. The differential output of the first stage is further amplified at the second stage to resolve a smaller range of current differences down to less than 100 fA. The integration capacitor in the first stage and the gain of the second stage are programmable to cover a wide range of the input current ranges up to a range of μA. The proposed potentiostat incorporates two ADC stages, one for each stage. While the outputs of the first stage are compared with a threshold voltage, the whole integration time for both the currents is converted to digital by counters. When difference between the two inputs is too small to be resolved by this ADC, the second stage now becomes a dual-slope ADC to quantize the amplified difference. The ADC in the second stage incorporates a charge/discharge current source, which allows a time-domain measurement of the amplified signal. This method avoids the use of a separate ADC stage, which will consume additional power and area. The proposed potentiostat circuit is designed in 180nm CMOS SOI process technology. Simulation results show that this architecture can accurately measure the differential input current from 1 pA to 1 μA. The minimum input referred integrated current noise in 1 Hz to 10 kHz bandwidth is less than 100 fA with power consumption of 15 μA from ±1-V supply. This fully differential design is adequate to be integrated in an implantable amperometric electrochemical sensing device with low area and power requirements while offering robustness to background current variations.

AB - A fully differential CMOS analog front-end circuit for electrochemical sensing is presented. Its first stage is based on a differential transimpedance amplifier (TIA) with an input common-mode feedback to maintain the potentials at the differential working electrodes. The differential output of the first stage is further amplified at the second stage to resolve a smaller range of current differences down to less than 100 fA. The integration capacitor in the first stage and the gain of the second stage are programmable to cover a wide range of the input current ranges up to a range of μA. The proposed potentiostat incorporates two ADC stages, one for each stage. While the outputs of the first stage are compared with a threshold voltage, the whole integration time for both the currents is converted to digital by counters. When difference between the two inputs is too small to be resolved by this ADC, the second stage now becomes a dual-slope ADC to quantize the amplified difference. The ADC in the second stage incorporates a charge/discharge current source, which allows a time-domain measurement of the amplified signal. This method avoids the use of a separate ADC stage, which will consume additional power and area. The proposed potentiostat circuit is designed in 180nm CMOS SOI process technology. Simulation results show that this architecture can accurately measure the differential input current from 1 pA to 1 μA. The minimum input referred integrated current noise in 1 Hz to 10 kHz bandwidth is less than 100 fA with power consumption of 15 μA from ±1-V supply. This fully differential design is adequate to be integrated in an implantable amperometric electrochemical sensing device with low area and power requirements while offering robustness to background current variations.

UR - http://www.scopus.com/inward/record.url?scp=85077070814&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85077070814&partnerID=8YFLogxK

U2 - 10.1109/BIOCAS.2019.8919031

DO - 10.1109/BIOCAS.2019.8919031

M3 - Conference contribution

AN - SCOPUS:85077070814

T3 - BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings

BT - BioCAS 2019 - Biomedical Circuits and Systems Conference, Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -