A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus

M. Z.A. Anabtawi, Nidal Hilal, A. Al-Muftah, M. Khalaf, M. C. Leaper, M. A. Hastaoglu

    Research output: Contribution to journalArticle

    Abstract

    A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.

    Original languageEnglish (US)
    Pages (from-to)35-48
    Number of pages14
    JournalAdvanced Powder Technology
    Volume16
    Issue number1
    DOIs
    StatePublished - Jan 1 2005

    Fingerprint

    Drag
    Fluids
    Fluidization
    Mathematical models

    Keywords

    • Darcy's flow
    • Drag force
    • Force balance model
    • Spouted bed
    • Velocity distribution

    ASJC Scopus subject areas

    • Chemical Engineering(all)
    • Mechanics of Materials

    Cite this

    Anabtawi, M. Z. A., Hilal, N., Al-Muftah, A., Khalaf, M., Leaper, M. C., & Hastaoglu, M. A. (2005). A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus. Advanced Powder Technology, 16(1), 35-48. https://doi.org/10.1163/1568552053166700

    A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus. / Anabtawi, M. Z.A.; Hilal, Nidal; Al-Muftah, A.; Khalaf, M.; Leaper, M. C.; Hastaoglu, M. A.

    In: Advanced Powder Technology, Vol. 16, No. 1, 01.01.2005, p. 35-48.

    Research output: Contribution to journalArticle

    Anabtawi, MZA, Hilal, N, Al-Muftah, A, Khalaf, M, Leaper, MC & Hastaoglu, MA 2005, 'A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus', Advanced Powder Technology, vol. 16, no. 1, pp. 35-48. https://doi.org/10.1163/1568552053166700
    Anabtawi MZA, Hilal N, Al-Muftah A, Khalaf M, Leaper MC, Hastaoglu MA. A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus. Advanced Powder Technology. 2005 Jan 1;16(1):35-48. https://doi.org/10.1163/1568552053166700
    Anabtawi, M. Z.A. ; Hilal, Nidal ; Al-Muftah, A. ; Khalaf, M. ; Leaper, M. C. ; Hastaoglu, M. A. / A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus. In: Advanced Powder Technology. 2005 ; Vol. 16, No. 1. pp. 35-48.
    @article{049ea3ac5419455ea05767d0b088a07b,
    title = "A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus",
    abstract = "A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.",
    keywords = "Darcy's flow, Drag force, Force balance model, Spouted bed, Velocity distribution",
    author = "Anabtawi, {M. Z.A.} and Nidal Hilal and A. Al-Muftah and M. Khalaf and Leaper, {M. C.} and Hastaoglu, {M. A.}",
    year = "2005",
    month = "1",
    day = "1",
    doi = "10.1163/1568552053166700",
    language = "English (US)",
    volume = "16",
    pages = "35--48",
    journal = "Advanced Powder Technology",
    issn = "0921-8831",
    publisher = "Elsevier BV",
    number = "1",

    }

    TY - JOUR

    T1 - A force balance model of a spouted bed for Darcy and non-Darcy flow in the annulus

    AU - Anabtawi, M. Z.A.

    AU - Hilal, Nidal

    AU - Al-Muftah, A.

    AU - Khalaf, M.

    AU - Leaper, M. C.

    AU - Hastaoglu, M. A.

    PY - 2005/1/1

    Y1 - 2005/1/1

    N2 - A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.

    AB - A mathematical model based on Mamuro and Hattori's force model including the drag force effect on the particles in the annulus of a spouted bed was constructed. The results from this model were compared with previous work, including Mamuro and Hattori's model for Darcy's law and Epstein and Levine's model and that proposed by Hattori et al. for non-Darcy flow in the annulus, none of which included the effect of drag force on particles. Results presented in the paper showed that when drag force was included in the force balance model, a lower value of Ua/Umf, the ratio of superficial fluid velocity in the annulus to minimum fluidization velocity, was obtained. Z/Hm, the ratio of axial distance from fluid inlet to the maximum spoutable bed depth, increased compared with models where the effect of drag was absent. Our results also showed an increase in radial cross flow from the spout to the annulus, especially in the lower part of the bed compared to those obtained by Mamuro and Hattori. The proposed model was found to be sensitive to Janssen's factor, J, and also displayed a qualitative agreement with the Hattori et al. model which was proposed for non-Darcy conditions.

    KW - Darcy's flow

    KW - Drag force

    KW - Force balance model

    KW - Spouted bed

    KW - Velocity distribution

    UR - http://www.scopus.com/inward/record.url?scp=15744369262&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=15744369262&partnerID=8YFLogxK

    U2 - 10.1163/1568552053166700

    DO - 10.1163/1568552053166700

    M3 - Article

    VL - 16

    SP - 35

    EP - 48

    JO - Advanced Powder Technology

    JF - Advanced Powder Technology

    SN - 0921-8831

    IS - 1

    ER -