No photo of Said Nourbakhsh

Said Nourbakhsh

Full Professor Mech Engineering

    1979 …2006

    Research output per year

    If you made any changes in Pure these will be visible here soon.

    Research Output

    • 51 Article
    • 6 Conference contribution
    • 5 Chapter (peer-reviewed)
    • 4 Conference article
    Filter
    Article
    2006

    Scanning electron and atomic force microscopy to study plasma torch effects on B. cereus spores

    Tarasenko, O., Nourbakhsh, S., Kuo, S. P., Bakhtina, A., Alusta, P., Kudasheva, D., Cowman, M. & Levon, K., Aug 1 2006, In : IEEE Transactions on Plasma Science. 34, 4 II, p. 1281-1289 9 p.

    Research output: Contribution to journalArticle

    1999

    Novel polyol-derived sol route for fabrication of PZT thin ferroelectric films

    Zou, Q., Nourbakhsh, S. & Kim, J., Sep 1999, In : Materials Letters. 40, 5, p. 240-245 6 p.

    Research output: Contribution to journalArticle

    1997

    Fabrication of Al2O3-reinforced Ni3Al composites by a novel in situ route

    Nourbakhsh, S., Sahin, O. & Margolin, H., Jan 1 1997, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 28, 4, p. 1069-1077 9 p.

    Research output: Contribution to journalArticle

    1996

    Microstructure of Al2O3 fiber-reinforced superalloy (INCONEL 718) composites

    Nourbakhsh, S., Sahin, O., Rhee, W. H. & Margolin, H., Jan 1 1996, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 27, 2, p. 451-458 8 p.

    Research output: Contribution to journalArticle

    Processing and characterization of fiber reinforced intermetallic matrix composites

    Nourbakhsh, S. & Margolin, H., Jan 1 1996, In : Materials and Manufacturing Processes. 11, 2, p. 283-305 23 p.

    Research output: Contribution to journalArticle

    1995

    A structural study of oxidation in an Al2O3 fiber reinforced titanium aluminide composite

    Nourbakhsh, S., Sahin, O. & Margolin, H., Aug 1995, In : Acta Metallurgica Et Materialia. 43, 8, p. 3035-3044 10 p.

    Research output: Contribution to journalArticle

    Novel metalorganic route for fabrication of BaTiO3 thin ferroelectric films

    Nourbakhsh, S., Vasilyeva, I. & Carter, J. N., Dec 1 1995, In : Applied Physics Letters. 1 p.

    Research output: Contribution to journalArticle

    1994

    A structural study of oxidation in a zirconia-toughened alumina fiber-reinforced NiAl composite

    Nourbakhsh, S., Sahin, O. & Margolin, H., Jun 1 1994, In : Metallurgical and Materials Transactions A. 25, 6, p. 1291-1299 9 p.

    Research output: Contribution to journalArticle

    Fiber strength and fiber/matrix bond strength in single crystal Al2O3 fiber reinforced Ni3Al based composites

    Nourbakhsh, S., Rhee, W. H., Sahin, O. & Margolin, H., Jun 1 1994, In : Metallurgical and Materials Transactions A. 25, 6, p. 1259-1265 7 p.

    Research output: Contribution to journalArticle

    Oxidation behavior of single-crystal Al2O3-fiber-reinforced Ni3Al-based composites

    Nourbakhsh, S., Rhee, W. H., Sahin, O. & Margolin, H., Jul 1 1994, In : Metallurgical and Materials Transactions A. 25, 7, p. 1501-1507 7 p.

    Research output: Contribution to journalArticle

    Precipitation behavior in Ti25AlHx alloys

    Nourbakhsh, S., Margolin, H., Levy, K. & Kennedy, J., Jan 15 1994, In : Scripta Metallurgica et Materiala. 30, 2, p. 209-212 4 p.

    Research output: Contribution to journalArticle

    1993

    A structural study of oxidation in a zirconia-toughened alumina fiber-reinforced Fe3Al composite

    Nourbakhsh, S., Sahin, O., Rhee, W. H. & Margolin, H., Feb 1 1993, In : Metallurgical Transactions A. 24, 2, p. 435-443 9 p.

    Research output: Contribution to journalArticle

    Constraint induced stresses and the hard surface-soft surface question in fatigue

    Hu, X., Margolin, H. & Nourbakhsh, S., May 1993, In : Acta Metallurgica Et Materialia. 41, 5, p. 1605-1612 8 p.

    Research output: Contribution to journalArticle

    The stresses in a face-centered cubic single crystal under uniaxial tension

    Hu, X., Wei, C., Margolin, H. & Nourbakhsh, S., Apr 1 1993, In : Metallurgical Transactions A. 24, 4, p. 875-881 7 p.

    Research output: Contribution to journalArticle

    1992

    Anisotropic memory effect in fatigue of Cu-Zn alloys

    Hu, X., Margolin, H., Duan, X. & Nourbakhsh, S., Apr 15 1992, In : Scripta Metallurgica et Materiala. 26, 8, p. 1251-1256 6 p.

    Research output: Contribution to journalArticle

    Burst phenomena in fatigue of 70-30 alpha-brass at room temperature

    Hu, X., Margolin, H., Duan, X. & Nourbakhsh, S., Oct 1 1992, In : Materials Science and Engineering A. 157, 2, p. 181-194 14 p.

    Research output: Contribution to journalArticle

    Hysteresis loop shape in fatigue of CuZn alloys

    Hu, X., Margolin, H., Duan, X. & Nourbakhsh, S., Oct 1 1992, In : Materials Science and Engineering A. 157, 2, p. 169-180 12 p.

    Research output: Contribution to journalArticle

    Luders band propagation and cross slip in 70-30 α-brass single crystals

    Hu, X., Margolin, H., Duan, X. & Nourbakhsh, S., Apr 15 1992, In : Scripta Metallurgica et Materiala. 26, 8, p. 1257-1262 6 p.

    Research output: Contribution to journalArticle

    Mechanical behavior of a fiber reinforced Ni3Al matrix composite

    Nourbakhsh, S., Rhee, W. H., Sahin, O. & Margolin, H., May 30 1992, In : Materials Science and Engineering A. 153, 1-2, p. 619-627 9 p.

    Research output: Contribution to journalArticle

    Microstructural characterization of a zirconia-toughened alumina fiber reinforced niobium aluminide composite

    Nourbakhsh, S., Sahin, O., Rhee, W. H. & Margolin, H., Feb 1992, In : Acta Metallurgica Et Materialia. 40, 2, p. 285-294 10 p.

    Research output: Contribution to journalArticle

    Oxidation of a zirconia-toughened

    Sahin, O., Nourbakhsh, S., Rhee, W. H. & Margolin, H., Nov 1 1992, In : Metallurgical Transactions A. 23, 11, p. 3151-3160 10 p.

    Research output: Contribution to journalArticle

    Pinning of grain boundaries by deformable particles

    Nourbakhsh, S., Apr 1 1992, In : Metallurgical Transactions A. 23, 4, p. 1181-1186 6 p.

    Research output: Contribution to journalArticle

    The Bauschinger effect and the stresses in a strained single crystal

    Hu, X., Wei, C., Margolin, H. & Nourbakhsh, S., Oct 1 1992, In : Scripta Metallurgica et Materiala. 27, 7, p. 865-870 6 p.

    Research output: Contribution to journalArticle

    1991

    Pressure casting of a zirconia-toughened alumina fiber-reinforced NiAl composite

    Nourbakhsh, S., Sahin, O., Rhee, W. H. & Margolin, H., Dec 1 1991, In : Metallurgical Transactions A. 22, 12, p. 3059-3064 6 p.

    Research output: Contribution to journalArticle

    Processing of continuous-ceramic-fiber-reinforced intermetallic composites by pressure casting

    Nourbakhsh, S. & Margolin, H., Oct 1 1991, In : Materials Science and Engineering A. 144, 1-2, p. 133-141 9 p.

    Research output: Contribution to journalArticle

    1990

    Interaction of Al2O3-ZrO2 fibers with a Ti-Al matrix during pressure casting

    Nourbakhsh, S., Liang, F. L. & Margolin, H., Jan 1 1990, In : Metallurgical Transactions A. 21, 1, p. 213-219 7 p.

    Research output: Contribution to journalArticle

    1989

    Calculation of minimum pressure for liquid metal infiltration of a fiber array

    Nourbakhsh, S., Liang, F. L. & Margolin, H., Sep 1 1989, In : Metallurgical Transactions A. 20, 9, p. 1861-1866 6 p.

    Research output: Contribution to journalArticle

    Characterization of a zirconia toughened alumina fibre, PRD-166

    Nourbakhsh, S., Liang, F. L. & Margolin, H., Nov 1 1989, In : Journal of Materials Science Letters. 8, 11, p. 1252-1254 3 p.

    Research output: Contribution to journalArticle

    Microstructural observations of pressure cast Ni3Al/Al2O3 and Ni/Al2O3 composites

    Nourbakhsh, S., Margolin, H. & Liang, F. L., Oct 1 1989, In : Metallurgical Transactions A. 20, 10, p. 2159-2166 8 p.

    Research output: Contribution to journalArticle

    Microstructure and mechanical properties of rapidly solidified and annealed Ni-Al intermetallic alloys

    Nourbakhsh, S. & Chen, P., Jun 1989, In : Acta Metallurgica. 37, 6, p. 1573-1583 11 p.

    Research output: Contribution to journalArticle

    Shear band formation in heavily cold rolled 70-30 brass

    Nourbakhsh, S. & Song, Q., Jul 1 1989, In : Metallurgical Transactions A. 20, 7, p. 1267-1275 9 p.

    Research output: Contribution to journalArticle

    Tensile behabior of cold rolled α-brass

    Leong, W. & Nourbakhsh, S., Jun 1989, In : Scripta Metallurgica. 23, 6, p. 1011-1014 4 p.

    Research output: Contribution to journalArticle

    1988

    An apparatus for pressure casting of fibre-reinforced high-temperature metal-matrix composites

    Nourbakhsh, S., Liang, F. L. & Margolin, H., Dec 1 1988, In : Journal of Physics E: Scientific Instruments. 21, 9, p. 898-902 5 p., 017.

    Research output: Contribution to journalArticle

    Fabrication Of A Ni3Ai/Ai203 Unidirectional Composite By Pressure Casting

    Nourbakhsh, S., Liang, F. L. & Margolin, H., Jan 1 1988, In : Advanced Materials and Manufacturing Processes. 3, 1, p. 57-78 22 p.

    Research output: Contribution to journalArticle

    Fabrication of Ni3A1/A1203 unidirectional composite by pressure casting

    Nourbakhsh, S., Liang, F. L. & Margolin, H., 1988, In : Advanced Materials and Manufacturing Processes. 3, p. 57

    Research output: Contribution to journalArticle

    Texture formation and transition in Cold-rolled titanium

    Nourbakhsh, S. & O'Brien, T. D., Apr 1988, In : Materials Science and Engineering. 100, C, p. 109-114 6 p.

    Research output: Contribution to journalArticle

    1986

    High strain plane-strain deformation of 70-30 brass in a channel die

    Nourbakhsh, S. & Vujic, D., Jun 1986, In : Acta Metallurgica. 34, 6, p. 1083-1090 8 p.

    Research output: Contribution to journalArticle

    1985

    Bend ductility of 70-30 alpha brass

    Yang, C. J., Margolin, H., D'Antonio, C. & Nourbakhsh, S., Apr 1985, In : Scripta Metallurgica. 19, 4, p. 489-492 4 p.

    Research output: Contribution to journalArticle

    Twin-precipitate interaction in Ti-1wt%Cu

    Nourbakhsh, S. & Crowther, J. J., Jul 1985, In : Acta Metallurgica. 33, 7, p. 1187-1193 7 p.

    Research output: Contribution to journalArticle

    1983

    On the preparation of specimens from multifactory Nb3Sn wires for transmission electron microscopy

    Hascicek, Y. S., Nourbakhsh, S. & Goringe, M. J., 1983, In : Journal of Microscopy. 131, p. 55

    Research output: Contribution to journalArticle

    On the preparation of specimens from multifilamentary Nb3Sn superconducting wires for transmission electron microscopy

    Hascicek, Y. S., Nourbakhsh, S. & Goringe, M. J., Jul 1983, In : Journal of Microscopy. 131, 1, p. 55-61 7 p.

    Research output: Contribution to journalArticle

    The mounting of samples of filamentary A15 superconductor for JC tests

    Jones, H., Hudson, P. A., Hascicek, Y. S., Nourbakhsh, S. & Goringe, M. J., Oct 1983, In : Cryogenics. 23, 10, p. 557-559 3 p.

    Research output: Contribution to journalArticle

    1982

    On the presence of voids in bronze-route multi-filamentary Nb3Sn superconducting wires

    Nourbakhsh, S., Hascicek, Y. S., Goringe, M. J. & Martin, J. W., Nov 1 1982, In : Journal of Materials Science. 17, 11, p. 3204-3210 7 p.

    Research output: Contribution to journalArticle

    Structure and properties of quenched and aged Cu-2Be after deformation to large strains

    Nourbakhsh, S. & Nutting, J., Jul 1 1982, In : Metal Science. 16, 7, p. 323-331 9 p.

    Research output: Contribution to journalArticle

    1980

    The high strain deformation of an aluminium-4% copper alloy in the supersaturated and aged conditions

    Nourbakhsh, S. & Nutting, J., Mar 1980, In : Acta Metallurgica. 28, 3, p. 357-365 9 p.

    Research output: Contribution to journalArticle

    1979

    Structure and properties of plastically deformed α-Ti

    Blicharski, M., Nourbakhsh, S. & Nutting, J., Jan 1 1979, In : Metal Science. 13, 9, p. 516-522 7 p.

    Research output: Contribution to journalArticle